Recent advances in the mechanical characterization of shales at nano-to micro-scales: A review
Abstract
Understanding geomechanical properties of shales, such as stiffness properties and fracture toughness, is important in different areas of petroleum industry-related activities. Nanoscale to microscale experiments on shale samples require a much smaller sample compared to macroscale experiments. This is a major advantage because irregularly-shaped drill cuttings from shales can be used for experimental analyses, such as nanoindentation or atomic force microscopy (AFM). However, characterization of mechanical properties at the nano- to micro-scale is a relatively new addition to classical geomechanical experiments on shales, and there is still a lack of both fundamental knowledge and standard procedures for conducting experiments at this scale. The theoretical principles of nanoindentation-based (Gridded Nanoindentation and Modulus Mapping) and AFM-based experimental methods (PeakForce QNMTM and AFM-IR), a review of the literature results and the major findings are explained in Sections 2 and 3, respectively. These experimental techniques are compared in Section 4. Overall, nanoindentation experiments reveal the anisotropy of organic matter (OM)-rich shales at the nanoscale, and it is shown that gridded nanoindentation is capable of characterizing different minerals with respect to their stiffness properties. The capability of AFM (PeakForce QNMTM) to differentiate between different minerals within OM-rich shales with distinct mechanical properties, in particular stiffness,more »
- Authors:
-
- Univ. of Texas, Arlington, TX (United States)
- Publication Date:
- Research Org.:
- Univ. of Texas, Arlington, TX (United States)
- Sponsoring Org.:
- USDOE Office of Nuclear Energy (NE)
- OSTI Identifier:
- 1842340
- Alternate Identifier(s):
- OSTI ID: 1868813
- Grant/Contract Number:
- NE0008797
- Resource Type:
- Accepted Manuscript
- Journal Name:
- Mechanics of Materials
- Additional Journal Information:
- Journal Volume: 162; Journal ID: ISSN 0167-6636
- Publisher:
- Elsevier
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 36 MATERIALS SCIENCE; Gridded nanoindentation; Modulus mapping; PeakForce QNM™; Mechanical moduli; Fracture toughness; Thermal maturation
Citation Formats
Sobhbidari, Farnood, and Hu, Qinhong. Recent advances in the mechanical characterization of shales at nano-to micro-scales: A review. United States: N. p., 2021.
Web. doi:10.1016/j.mechmat.2021.104043.
Sobhbidari, Farnood, & Hu, Qinhong. Recent advances in the mechanical characterization of shales at nano-to micro-scales: A review. United States. https://doi.org/10.1016/j.mechmat.2021.104043
Sobhbidari, Farnood, and Hu, Qinhong. Wed .
"Recent advances in the mechanical characterization of shales at nano-to micro-scales: A review". United States. https://doi.org/10.1016/j.mechmat.2021.104043. https://www.osti.gov/servlets/purl/1842340.
@article{osti_1842340,
title = {Recent advances in the mechanical characterization of shales at nano-to micro-scales: A review},
author = {Sobhbidari, Farnood and Hu, Qinhong},
abstractNote = {Understanding geomechanical properties of shales, such as stiffness properties and fracture toughness, is important in different areas of petroleum industry-related activities. Nanoscale to microscale experiments on shale samples require a much smaller sample compared to macroscale experiments. This is a major advantage because irregularly-shaped drill cuttings from shales can be used for experimental analyses, such as nanoindentation or atomic force microscopy (AFM). However, characterization of mechanical properties at the nano- to micro-scale is a relatively new addition to classical geomechanical experiments on shales, and there is still a lack of both fundamental knowledge and standard procedures for conducting experiments at this scale. The theoretical principles of nanoindentation-based (Gridded Nanoindentation and Modulus Mapping) and AFM-based experimental methods (PeakForce QNMTM and AFM-IR), a review of the literature results and the major findings are explained in Sections 2 and 3, respectively. These experimental techniques are compared in Section 4. Overall, nanoindentation experiments reveal the anisotropy of organic matter (OM)-rich shales at the nanoscale, and it is shown that gridded nanoindentation is capable of characterizing different minerals with respect to their stiffness properties. The capability of AFM (PeakForce QNMTM) to differentiate between different minerals within OM-rich shales with distinct mechanical properties, in particular stiffness, is also demonstrated. It is shown that AFM-based methods are more straightforward than gridded-nanoindentation to characterize OM-rich shales based on the stiffness of different constituent minerals of OM-rich shales, but nanoindentation can apply higher loads than AFM-based methods. Therefore, they can measure creep properties and fracture toughness of OM-rich shales. Here, it is shown that the OM is the most compliant part of the OM-rich shales, but it is still unclear if thermal maturation has an impact on the stiffness of OM. It is necessary to investigate if there is a relationship between the OM type (kerogen, bitumen, etc.) and mechanical properties such as Young’s modulus and Creep rate.},
doi = {10.1016/j.mechmat.2021.104043},
journal = {Mechanics of Materials},
number = ,
volume = 162,
place = {United States},
year = {Wed Sep 01 00:00:00 EDT 2021},
month = {Wed Sep 01 00:00:00 EDT 2021}
}
Works referenced in this record:
Thermomechanical Properties of Lignin-Based Electrospun Nanofibers and Films Reinforced with Cellulose Nanocrystals: A Dynamic Mechanical and Nanoindentation Study
journal, November 2013
- Ago, Mariko; Jakes, Joseph E.; Rojas, Orlando J.
- ACS Applied Materials & Interfaces, Vol. 5, Issue 22
Fracture toughness of silicon nitride thin films of different thicknesses as measured by bulge tests
journal, February 2011
- Merle, B.; Göken, M.
- Acta Materialia, Vol. 59, Issue 4
Effect of contact deformations on the adhesion of particles
journal, November 1975
- Derjaguin, B. V.; Muller, V. M.; Toporov, Yu. P.
- Journal of Colloid and Interface Science, Vol. 53, Issue 2
Mapping Quantitative Mechanical Properties at Molecular Scale Using Peak Force Tapping AFM
journal, July 2010
- Su, C.
- Microscopy and Microanalysis, Vol. 16, Issue S2
Seismic anisotropy in sedimentary rocks, part 1: A single‐plug laboratory method
journal, September 2002
- Wang, Zhijing
- GEOPHYSICS, Vol. 67, Issue 5
Nanochemomechanical assessment of shale: a coupled WDS-indentation analysis
journal, September 2012
- Deirieh, A.; Ortega, J. A.; Ulm, F. -J.
- Acta Geotechnica, Vol. 7, Issue 4
Shales at all scales: Exploring coupled processes in mudrocks
journal, March 2017
- Ilgen, Anastasia G.; Heath, Jason E.; Akkutlu, I. Yucel
- Earth-Science Reviews, Vol. 166
Nanoindentation assisted investigation on the viscoelastic behavior of carbonated cementitious matrix: Influence of loading function
journal, November 2016
- Ashraf, Warda; Tian, Nannan
- Construction and Building Materials, Vol. 127
Relationships between compressional‐wave and shear‐wave velocities in clastic silicate rocks
journal, April 1985
- Castagna, J. P.; Batzle, M. L.; Eastwood, R. L.
- GEOPHYSICS, Vol. 50, Issue 4
Velocity anisotropy and attenuation of shale in under- and overpressured conditions: Seismic attributes of overpressured shale
journal, August 2002
- Domnesteanu, Patricia; McCann, Clive; Sothcott, Jeremy
- Geophysical Prospecting, Vol. 50, Issue 5
Role of Organic Matter on Nanoscale and Microscale Creep Properties of Source Rocks
journal, January 2019
- Slim, Mirna; Abedi, Sara; Bryndzia, L. Taras
- Journal of Engineering Mechanics, Vol. 145, Issue 1
Quantitative imaging of nanoscale mechanical properties using hybrid nanoindentation and force modulation
journal, August 2001
- Syed Asif, S. A.; Wahl, K. J.; Colton, R. J.
- Journal of Applied Physics, Vol. 90, Issue 3
Drilling in mudrocks: rock behavior issues
journal, June 2003
- Fam, Moheb A.; Dusseault, Maurice B.; Fooks, Jeanette C.
- Journal of Petroleum Science and Engineering, Vol. 38, Issue 3-4
A molecular informed poroelastic model for organic-rich, naturally occurring porous geocomposites
journal, March 2016
- Monfared, Siavash; Ulm, Franz-Josef
- Journal of the Mechanics and Physics of Solids, Vol. 88
Scaling relationships for indentation measurements
journal, July 2002
- Cheng, Yang-Tse; Li, Zhiyong; Cheng, Che-Min
- Philosophical Magazine A, Vol. 82, Issue 10
Can microscale fracture tests provide reliable fracture toughness values? A case study in silicon
journal, February 2015
- Jaya, Balila Nagamani; Kirchlechner, Christoph; Dehm, Gerhard
- Journal of Materials Research, Vol. 30, Issue 5
The History of the Development of Clay Mineralogy
journal, January 1988
- Grim, Ralph E.
- Clays and Clay Minerals, Vol. 36, Issue 2
Localized mechanical property assessment of SiC/SiC composite materials
journal, March 2015
- Frazer, D.; Abad, M. D.; Krumwiede, D.
- Composites Part A: Applied Science and Manufacturing, Vol. 70
Modeling the viscoelasticity of shale by nanoindentation creep tests
journal, March 2020
- Shi, Xian; Jiang, Shu; Yang, Liu
- International Journal of Rock Mechanics and Mining Sciences, Vol. 127
Raman spectroscopy to study thermal maturity and elastic modulus of kerogen
journal, January 2018
- Khatibi, Seyedalireza; Ostadhassan, Mehdi; Tuschel, David
- International Journal of Coal Geology, Vol. 185
Applications of nano-indentation methods to estimate nanoscale mechanical properties of shale reservoir rocks
journal, September 2016
- Liu, Kouqi; Ostadhassan, Mehdi; Bubach, Bailey
- Journal of Natural Gas Science and Engineering, Vol. 35
Impact of thermal maturation on nano-scale elastic properties of organic matter in shales
journal, February 2016
- Emmanuel, Simon; Eliyahu, Moshe; Day-Stirrat, Ruarri J.
- Marine and Petroleum Geology, Vol. 70
Toward Accurate Quantitative Elasticity Mapping of Rigid Nanomaterials by Atomic Force Microscopy: Effect of Acquisition Frequency, Loading Force, and Tip Geometry
journal, August 2018
- Zeng, Guanghong; Dirscherl, Kai; Garnæs, Jørgen
- Nanomaterials, Vol. 8, Issue 8
Nanoscale probing of electron-regulated structural transitions in silk proteins by near-field IR imaging and nano-spectroscopy
journal, October 2016
- Qin, Nan; Zhang, Shaoqing; Jiang, Jianjuan
- Nature Communications, Vol. 7, Issue 1
AFM-IR: Technology and Applications in Nanoscale Infrared Spectroscopy and Chemical Imaging
journal, December 2016
- Dazzi, Alexandre; Prater, Craig B.
- Chemical Reviews, Vol. 117, Issue 7
Softening of organic matter in shales at reservoir temperatures
journal, October 2016
- Emmanuel, Simon; Eliyahu, Moshe; Day-Stirrat, Ruarri J.
- Petroleum Geoscience, Vol. 23, Issue 2
Multiscale Poromechanical Modeling of Shales Incorporating Microcracks
journal, May 2019
- Dubey, Vasav; Mashhadian, Mohammad; Abedi, Sara
- Rock Mechanics and Rock Engineering, Vol. 52, Issue 12
Mechanical Properties and Failure Envelope of Kerogen Matrix by Molecular Dynamics Simulations
journal, January 2020
- Wu, Tianhao; Firoozabadi, Abbas
- The Journal of Physical Chemistry C, Vol. 124, Issue 4
Correlations of Uniaxial Compressive Strength of Rock Mass with Conventional Strength Properties through Random Number Generation
journal, February 2017
- Kumar, Ranjan; Bhargava, Kapilesh; Choudhury, Deepankar
- International Journal of Geomechanics, Vol. 17, Issue 2
Geomechanical and ultrasonic characterization of a Norwegian Sea shale
journal, May 2011
- Dewhurst, David N.; Siggins, Anthony F.; Sarout, Joël
- GEOPHYSICS, Vol. 76, Issue 3
Effects of porosity and clay content on wave velocities in sandstones
journal, November 1986
- Han, De‐hua; Nur, A.; Morgan, Dale
- GEOPHYSICS, Vol. 51, Issue 11
Surface Studies by Scanning Tunneling Microscopy
journal, July 1982
- Binnig, G.; Rohrer, H.; Gerber, Ch.
- Physical Review Letters, Vol. 49, Issue 1
Non-Destructive Investigations of the Thermal Maturity and Mechanical Properties of Source Rocks
journal, September 2018
- Eichmann, S. L.; Jacobi, D.; Haque, M. H.
- Journal of Petroleum Geology, Vol. 41, Issue 4
Fracture Toughness Determinations by Indentation
journal, July 1976
- Evans, A. G.; Charles, E. A.
- Journal of the American Ceramic Society, Vol. 59, Issue 7-8
Mechanical properties of shale-gas reservoir rocks — Part 1: Static and dynamic elastic properties and anisotropy
journal, September 2013
- Sone, Hiroki; Zoback, Mark D.
- GEOPHYSICS, Vol. 78, Issue 5
Organic maturity, elastic properties, and textural characteristics of self resourcing reservoirs
journal, July 2013
- Zargari, Saeed; Prasad, Manika; Mba, Kenechukwu C.
- GEOPHYSICS, Vol. 78, Issue 4
Grid indentation analysis of composite microstructure and mechanics: Principles and validation
journal, August 2006
- Constantinides, G.; Ravi Chandran, K. S.; Ulm, F. -J.
- Materials Science and Engineering: A, Vol. 430, Issue 1-2
Nanoindentation investigation of creep properties of calcium silicate hydrates
journal, October 2013
- Vandamme, M.; Ulm, F. -J.
- Cement and Concrete Research, Vol. 52
Multiscale Approach for Mechanical Characterization of Organic-Rich Shale and Its Application
journal, January 2019
- Zhao, Junliang; Zhang, Dongxiao; Wu, Tianhao
- International Journal of Geomechanics, Vol. 19, Issue 1
The nanogranular nature of shale
journal, June 2006
- Ulm, Franz-Josef; Abousleiman, Younane
- Acta Geotechnica, Vol. 1, Issue 2
AFM–IR: Combining Atomic Force Microscopy and Infrared Spectroscopy for Nanoscale Chemical Characterization
journal, December 2012
- Dazzi, Alexandre; Prater, Craig B.; Hu, Qichi
- Applied Spectroscopy, Vol. 66, Issue 12
Optimizing nano-dynamic mechanical analysis for high-resolution, elastic modulus mapping in organic-rich shales
journal, November 2014
- Wilkinson, Taylor M.; Zargari, Saeed; Prasad, Manika
- Journal of Materials Science, Vol. 50, Issue 3
Nano-dynamic mechanical analysis (nano-DMA) of creep behavior of shales: Bakken case study
journal, November 2017
- Liu, Kouqi; Ostadhassan, Mehdi; Bubach, Bailey
- Journal of Materials Science, Vol. 53, Issue 6
Nanoindentation and the dynamic characterization of viscoelastic solids
journal, March 2008
- Herbert, E. G.; Oliver, W. C.; Pharr, G. M.
- Journal of Physics D: Applied Physics, Vol. 41, Issue 7
Nanomechanics of organic-rich shales: the role of thermal maturity and organic matter content on texture
journal, June 2016
- Abedi, Sara; Slim, Mirna; Ulm, Franz-Josef
- Acta Geotechnica, Vol. 11, Issue 4
Statistical Indentation Techniques for Hydrated Nanocomposites: Concrete, Bone, and Shale
journal, September 2007
- Ulm, Franz-Josef; Vandamme, Matthieu; Bobko, Chris
- Journal of the American Ceramic Society, Vol. 90, Issue 9
Impact of fabric, microcracks and stress field on shale anisotropy
journal, April 2006
- Dewhurst, David N.; Siggins, Anthony F.
- Geophysical Journal International, Vol. 165, Issue 1
Theory of infrared nanospectroscopy by photothermal induced resonance
journal, June 2010
- Dazzi, A.; Glotin, F.; Carminati, R.
- Journal of Applied Physics, Vol. 107, Issue 12
Modeling the Effect of Maturity on the Elastic Moduli of Kerogen Using Atomistic Simulations
journal, January 2020
- Kashinath, Abishek; Szulczewski, Michael; Dogru, A. H.
- Energy & Fuels, Vol. 34, Issue 2
Pore size distribution of shaley rock by small angle neutron scattering
journal, August 1983
- Hall, P. L.; Mildner, D. F. R.; Borst, R. L.
- Applied Physics Letters, Vol. 43, Issue 3
On the use of peak-force tapping atomic force microscopy for quantification of the local elastic modulus in hardened cement paste
journal, January 2012
- Trtik, Pavel; Kaufmann, Josef; Volz, Udo
- Cement and Concrete Research, Vol. 42, Issue 1
In situ micropillar compression reveals superior strength and ductility but an absence of damage in lamellar bone
journal, June 2014
- Schwiedrzik, Jakob; Raghavan, Rejin; Bürki, Alexander
- Nature Materials, Vol. 13, Issue 7
Statistical grid nanoindentation analysis to estimate macro-mechanical properties of the Bakken Shale
journal, May 2018
- Liu, Kouqi; Ostadhassan, Mehdi; Bubach, Bailey
- Journal of Natural Gas Science and Engineering, Vol. 53
Instrumented nanoindentation and 3D mechanistic modeling of a shale at multiple scales
journal, January 2015
- Bennett, Kane C.; Berla, Lucas A.; Nix, William D.
- Acta Geotechnica, Vol. 10, Issue 1
Nanomechanical characterization of organic matter in the Bakken formation by microscopy-based method
journal, September 2018
- Li, Chunxiao; Ostadhassan, Mehdi; Gentzis, Thomas
- Marine and Petroleum Geology, Vol. 96
Assessing mechanical properties of organic matter in shales: Results from coupled nanoindentation/SEM-EDX and micromechanical modeling
journal, June 2018
- Mashhadian, Mohammad; Verde, Alexander; Sharma, Prashant
- Journal of Petroleum Science and Engineering, Vol. 165
Effect of thermal maturity on elastic properties of kerogen
journal, March 2016
- Zargari, Saeed; Wilkinson, Taylor M.; Packard, Corinne E.
- GEOPHYSICS, Vol. 81, Issue 2
Critical review of analysis and interpretation of nanoindentation test data
journal, April 2006
- Fischer-Cripps, A. C.
- Surface and Coatings Technology, Vol. 200, Issue 14-15
Measuring fracture toughness of coatings using focused-ion-beam-machined microbeams
journal, February 2005
- Di Maio, D.; Roberts, S. G.
- Journal of Materials Research, Vol. 20, Issue 2
An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments
journal, June 1992
- Oliver, W. C.; Pharr, G. M.
- Journal of Materials Research, Vol. 7, Issue 06, p. 1564-1583
Application of PeakForce tapping mode of atomic force microscope to characterize nanomechanical properties of organic matter of the Bakken Shale
journal, December 2018
- Li, Chunxiao; Ostadhassan, Mehdi; Guo, Senli
- Fuel, Vol. 233
Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology
journal, January 2004
- Oliver, W. C.; Pharr, G. M.
- Journal of Materials Research, Vol. 19, Issue 1
The granular and polymer composite nature of kerogen-rich shale
journal, February 2016
- Abousleiman, Y. N.; Hull, K. L.; Han, Y.
- Acta Geotechnica, Vol. 11, Issue 3
Relation between static and dynamic Young's moduli of rocks
journal, December 1988
- Eissa, E. A.; Kazi, A.
- International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, Vol. 25, Issue 6
Elastic/Plastic Indentation Damage in Ceramics: The Median/Radial Crack System
journal, September 1980
- Lawn, B. R.; Evans, A. G.; Marshall, D. B.
- Journal of the American Ceramic Society, Vol. 63, Issue 9-10
Nanoscale Surface Properties of Organic Matter and Clay Minerals in Shale
journal, March 2019
- Tian, Shouceng; Wang, Tianyu; Li, Gensheng
- Langmuir, Vol. 35, Issue 17
Nanoscale geochemical and geomechanical characterization of organic matter in shale
journal, December 2017
- Yang, Jing; Hatcherian, Javin; Hackley, Paul C.
- Nature Communications, Vol. 8, Issue 1
Characterization of micro-nano pore networks in shale oil reservoirs of Paleogene Shahejie Formation in Dongying Sag of Bohai Bay Basin, East China
journal, October 2017
- Hu, Qinhong; Zhang, Yuxiang; Meng, Xianghao
- Petroleum Exploration and Development, Vol. 44, Issue 5
Experimental demonstration of the microscopic origin of circular dichroism in two-dimensional metamaterials
journal, June 2016
- Khanikaev, A. B.; Arju, N.; Fan, Z.
- Nature Communications, Vol. 7, Issue 1
Effective elastic properties of solid clays
journal, March 2001
- Wang, Zhijing (Zee); Wang, Hui; Cates, Michael E.
- GEOPHYSICS, Vol. 66, Issue 2
Surface Properties of Organic Kerogen in Continental and Marine Shale
journal, October 2018
- Tian, Shouceng; Dong, Xiaoxiao; Wang, Tianyu
- Langmuir, Vol. 34, Issue 46
Modification of Microscopic Properties of Shale by Carbonic Acid Treatment: Implications for CO 2 -Based Fracturing in Shale Formations
journal, January 2020
- Tian, Shouceng; Zhang, Panpan; Sheng, Mao
- Energy & Fuels, Vol. 34, Issue 3
Formulation of Drucker‐Prager Cap Model
journal, July 1985
- Resende, Luis; Martin, John B.
- Journal of Engineering Mechanics, Vol. 111, Issue 7
Stress‐dependent seismic anisotropy of shales
journal, January 1999
- Sayers, Colin M.
- GEOPHYSICS, Vol. 64, Issue 1
Anisotropic approximations for mudrocks: A seismic laboratory study
journal, November 2000
- Jakobsen, Morten; Johansen, Tor Arne
- GEOPHYSICS, Vol. 65, Issue 6
Mechanical properties of organic matter in shales mapped at the nanometer scale
journal, January 2015
- Eliyahu, Moshe; Emmanuel, Simon; Day-Stirrat, Ruarri J.
- Marine and Petroleum Geology, Vol. 59
Extended finite element framework for fault rupture dynamics including bulk plasticity: EXTENDED FE FRAMEWORK FOR FAULT RUPTURE DYNAMICS
journal, March 2013
- Liu, Fushen; Borja, Ronaldo I.
- International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 37, Issue 18
The nanogranular nature of C–S–H
journal, January 2007
- Constantinides, Georgios; Ulm, Franz-Josef
- Journal of the Mechanics and Physics of Solids, Vol. 55, Issue 1
Multi-scale evaluation of mechanical properties of the Bakken shale
journal, September 2018
- Li, Chunxiao; Ostadhassan, Mehdi; Abarghani, Arash
- Journal of Materials Science, Vol. 54, Issue 3
Numerical evaluation of mean-field homogenisation methods for predicting shale elastic response
journal, June 2016
- Goodarzi, M.; Rouainia, M.; Aplin, A. C.
- Computational Geosciences, Vol. 20, Issue 5
Fracture Toughness and Surface Energy Density of Kerogen by Molecular Dynamics Simulations in Tensile Failure
journal, June 2020
- Wu, Tianhao; Firoozabadi, Abbas
- The Journal of Physical Chemistry C, Vol. 124, Issue 29
Application of nanoindentation to characterize creep behavior of oil shales
journal, August 2018
- Liu, Kouqi; Ostadhassan, Mehdi; Bubach, Bailey
- Journal of Petroleum Science and Engineering, Vol. 167