Multifunctional approaches for safe structural batteries

Kalnaus, Sergiy; Asp, Leif E.; Li, Jianlin; Veith, Gabriel M.; Nanda, Jagjit; Daniel, Claus; Chen, Xi Chelsea; Westover, Andrew; Dudney, Nancy J.

doi:10.1016/j.est.2021.102747

Title: Multifunctional approaches for safe structural batteries

Journal Article · Fri Jun 04 00:00:00 UTC 2021 · Journal of Energy Storage

DOI: https://doi.org/10.1016/j.est.2021.102747 · OSTI ID:1797660

^[1]; Asp, Leif E. ^[2];

^[3];

^[4];

^[5];

^[4];

^[4]

Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Computational Sciences and Engineering Division
Chalmers University of Technology, Gothenburg (Sweden)
Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Electrification and Energy Infrastructures Division
Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Chemical Sciences Division
Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Energy Science and Technology Directorate

Recent advancements in Li and Li-ion based energy storage resulted in development of novel electrode materials for higher energy density which are finding their applications in transportation. There appears to be a limitation in improvement of specific energy of the system based solely on design of material compositions for multivalent intercalation compounds. In addition, higher energy stored by the system implies need for addressing safety concerns especially when it comes to large automotive battery packs. New approaches for improvement of both energy density and safety of batteries are emerging, where multifunctionality of the materials and/or architectures is utilized. Here, we present a review for such approaches from multifunctional current collectors to design of batteries capable of supporting mechanical loads and thus possessing ability to be used as a structural component.

View Accepted Manuscript (DOE)

Cite

Export

Save

Research Organization:: Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)

Sponsoring Organization:: USDOE Advanced Research Projects Agency - Energy (ARPA-E); USDOE Office of Energy Efficiency and Renewable Energy (EERE), Transportation Office. Vehicle Technologies Office

Grant/Contract Number:: AC05-00OR22725

OSTI ID:: 1797660

Journal Information:: Journal of Energy Storage, Journal Name: Journal of Energy Storage Vol. 40; ISSN 2352-152X

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

References (141)

Energy Storage Structural Composites with Integrated Lithium‐Ion Batteries: A Review Galos, Joel; Pattarakunnan, Koranat; Best, Adam S. Advanced Materials Technologies https://doi.org/10.1002/admt.202001059	journal	April 2021
Abuse‐Tolerant Electrolytes for Lithium‐Ion Batteries Chen, Zhiqi; Chao, Yunfeng; Li, Weihua Advanced Science https://doi.org/10.1002/advs.202003694	journal	March 2021
Understanding the Degradation Mechanisms of LiNi _0.5 Co _0.2 Mn _0.3 O ₂ Cathode Material in Lithium Ion Batteries Jung, Sung-Kyun; Gwon, Hyeokjo; Hong, Jihyun Advanced Energy Materials, Vol. 4, Issue 1 https://doi.org/10.1002/aenm.201300787	journal	August 2013
A Composite Gel-Polymer/Glass-Fiber Electrolyte for Sodium-Ion Batteries Gao, Hongcai; Guo, Bingkun; Song, Jie Advanced Energy Materials, Vol. 5, Issue 9 https://doi.org/10.1002/aenm.201402235	journal	February 2015
A Structural Battery and its Multifunctional Performance Asp, Leif E.; Bouton, Karl; Carlstedt, David Advanced Energy and Sustainability Research, Vol. 2, Issue 3 https://doi.org/10.1002/aesr.202170008	journal	March 2021
Microstructure and multifunctional properties of liquid + polymer bicomponent structural electrolytes: Epoxy gels and porous monoliths Gienger, Edwin B.; Nguyen, Phuong‐Anh T.; Chin, Wai Journal of Applied Polymer Science, Vol. 132, Issue 42 https://doi.org/10.1002/app.42681	journal	July 2015
Preparation of a Self‐Supported SiO ₂ Membrane as a Separator for Lithium‐Ion Batteries Kyeremateng, Neil Amponsah; Gukte, Dion; Ferch, Marc Batteries & Supercaps, Vol. 3, Issue 5 https://doi.org/10.1002/batt.201900169	journal	February 2020
Advanced Separators for Lithium-Ion and Lithium-Sulfur Batteries: A Review of Recent Progress Xiang, Yinyu; Li, Junsheng; Lei, Jiaheng ChemSusChem, Vol. 9, Issue 21 https://doi.org/10.1002/cssc.201600943	journal	September 2016
The design and application of multifunctional structure-battery materials systems Thomas, James P.; Qidwai, Muhammad A. JOM, Vol. 57, Issue 3 https://doi.org/10.1007/s11837-005-0228-5	journal	March 2005
Microtexture and structure of some high tensile strength, PAN-base carbon fibres Guigon, M.; Oberlin, A.; Desarmot, G. Fibre Science and Technology, Vol. 20, Issue 1 https://doi.org/10.1016/0015-0568(84)90057-5	journal	January 1984
Effects of inert fillers on the mechanical and electrochemical properties of lithium salt-poly(ethylene oxide) polymer electrolytes Weston, J.; Steele, B. Solid State Ionics, Vol. 7, Issue 1 https://doi.org/10.1016/0167-2738(82)90072-8	journal	August 1982
Blend-based and composite polymer solid electrolytes Wieczorek, W.; Such, K.; Przyłuski, J. Synthetic Metals, Vol. 45, Issue 3 https://doi.org/10.1016/0379-6779(91)91792-9	journal	December 1991
Role of the ceramic fillers in enhancing the transport properties of composite polymer electrolytes Croce, F.; Persi, L.; Scrosati, B. Electrochimica Acta, Vol. 46, Issue 16 https://doi.org/10.1016/S0013-4686(01)00458-3	journal	May 2001
Lithium ion secondary batteries; past 10 years and the future Nishi, Yoshio Journal of Power Sources, Vol. 100, Issue 1-2, p. 101-106 https://doi.org/10.1016/S0378-7753(01)00887-4	journal	November 2001
Characteristics of lithium-ion-conducting composite polymer-glass secondary cell electrolytes Zhang, X. Journal of Power Sources, Vol. 112, Issue 1 https://doi.org/10.1016/S0378-7753(02)00365-8	journal	October 2002
Structural performance of a multifunctional spacecraft structure based on plastic lithium-ion batteries Roberts, Samuel C.; Aglietti, Guglielmo S. Acta Astronautica, Vol. 67, Issue 3-4 https://doi.org/10.1016/j.actaastro.2010.03.004	journal	August 2010
Expansion of carbon fibres induced by lithium intercalation for structural electrode applications Jacques, Eric; Hellqvist Kjell, Maria; Zenkert, Dan Carbon, Vol. 59 https://doi.org/10.1016/j.carbon.2013.03.015	journal	August 2013
The effect of lithium-intercalation on the mechanical properties of carbon fibres Jacques, Eric; H. Kjell, Maria; Zenkert, Dan Carbon, Vol. 68 https://doi.org/10.1016/j.carbon.2013.11.056	journal	March 2014
Factors controlling the strength of carbon fibres in tension Tanaka, Fumihiko; Okabe, Tomonaga; Okuda, Haruki Composites Part A: Applied Science and Manufacturing, Vol. 57 https://doi.org/10.1016/j.compositesa.2013.11.007	journal	February 2014
Tensile properties of multifunctional composites embedded with lithium-ion polymer batteries Pattarakunnan, K.; Galos, J.; Das, R. Composites Part A: Applied Science and Manufacturing, Vol. 136 https://doi.org/10.1016/j.compositesa.2020.105966	journal	September 2020
Exploiting carbon nanotube networks for damage assessment of fiber reinforced composites Baltopoulos, A.; Polydorides, N.; Pambaguian, L. Composites Part B: Engineering, Vol. 76 https://doi.org/10.1016/j.compositesb.2015.02.022	journal	July 2015
Recent advances in carbon-fiber-reinforced thermoplastic composites: A review Yao, Shan-Shan; Jin, Fan-Long; Rhee, Kyong Yop Composites Part B: Engineering, Vol. 142 https://doi.org/10.1016/j.compositesb.2017.12.007	journal	June 2018
Performance analysis framework for structural battery composites in electric vehicles Carlstedt, David; Asp, Leif E. Composites Part B: Engineering, Vol. 186 https://doi.org/10.1016/j.compositesb.2020.107822	journal	April 2020
Impact of electrochemical cycling on the tensile properties of carbon fibres for structural lithium-ion composite batteries Jacques, Eric; Kjell, Maria H.; Zenkert, Dan Composites Science and Technology, Vol. 72, Issue 7 https://doi.org/10.1016/j.compscitech.2012.02.006	journal	April 2012
Structural power composites Asp, Leif E.; Greenhalgh, Emile S. Composites Science and Technology, Vol. 101 https://doi.org/10.1016/j.compscitech.2014.06.020	journal	September 2014
Multifunctional structural lithium ion batteries based on carbon fiber reinforced plastic composites Yu, Yalin; Zhang, Boming; Feng, Mengjie Composites Science and Technology, Vol. 147 https://doi.org/10.1016/j.compscitech.2017.04.031	journal	July 2017
Lithium iron phosphate coated carbon fiber electrodes for structural lithium ion batteries Hagberg, Johan; Maples, Henry A.; Alvim, Kayne S. P. Composites Science and Technology, Vol. 162 https://doi.org/10.1016/j.compscitech.2018.04.041	journal	July 2018
Multifunctional performance of a carbon fiber UD lamina electrode for structural batteries Johannisson, Wilhelm; Ihrner, Niklas; Zenkert, Dan Composites Science and Technology, Vol. 168 https://doi.org/10.1016/j.compscitech.2018.08.044	journal	November 2018
Effects of state of charge on elastic properties of 3D structural battery composites Carlstedt, David; Marklund, Erik; Asp, Leif E. Composites Science and Technology, Vol. 169 https://doi.org/10.1016/j.compscitech.2018.10.033	journal	January 2019
Characterization of the adhesive properties between structural battery electrolytes and carbon fibers Xu, Johanna; Johannisson, Wilhelm; Johansen, Marcus Composites Science and Technology, Vol. 188 https://doi.org/10.1016/j.compscitech.2019.107962	journal	March 2020
A review of recent research on mechanics of multifunctional composite materials and structures Gibson, Ronald F. Composite Structures, Vol. 92, Issue 12 https://doi.org/10.1016/j.compstruct.2010.05.003	journal	November 2010
Multifunctional Material Systems: A state-of-the-art review Ferreira, André Duarte B. L.; Nóvoa, Paulo R. O.; Marques, António Torres Composite Structures, Vol. 151 https://doi.org/10.1016/j.compstruct.2016.01.028	journal	September 2016
Vibration and acoustic properties of composites with embedded lithium-ion polymer batteries Galos, Joel; Khatibi, Akbar Afaghi; Mouritz, Adrian P. Composite Structures, Vol. 220 https://doi.org/10.1016/j.compstruct.2019.04.013	journal	July 2019
Compression properties of multifunctional composite structures with embedded lithium-ion polymer batteries Attar, P.; Galos, J.; Best, A. S. Composite Structures, Vol. 237 https://doi.org/10.1016/j.compstruct.2020.111937	journal	April 2020
A positive-temperature-coefficient electrode with thermal cut-off mechanism for use in rechargeable lithium batteries Feng, X. M.; Ai, X. P.; Yang, H. X. Electrochemistry Communications, Vol. 6, Issue 10 https://doi.org/10.1016/j.elecom.2004.07.021	journal	October 2004
Detailed studies on the fillers modification and their influence on composite, poly(oxyethylene)-based polymeric electrolytes Syzdek, Jarosław; Armand, Michel; Marcinek, Marek Electrochimica Acta, Vol. 55, Issue 4 https://doi.org/10.1016/j.electacta.2009.04.025	journal	January 2010
Reducing Li-ion safety hazards through use of non-flammable solvents and recent work at Sandia National Laboratories Nagasubramanian, Ganesan; Fenton, Kyle Electrochimica Acta, Vol. 101 https://doi.org/10.1016/j.electacta.2012.09.065	journal	July 2013
Heat-resistant and rigid-flexible coupling glass-fiber nonwoven supported polymer electrolyte for high-performance lithium ion batteries Wang, Qingfu; Zhang, Bo; Zhang, Jianjun Electrochimica Acta, Vol. 157 https://doi.org/10.1016/j.electacta.2015.01.083	journal	March 2015
Solid polymer electrolytes incorporating cubic Li7La3Zr2O12 for all-solid-state lithium rechargeable batteries Chen, Fei; Yang, Dunjie; Zha, Wenping Electrochimica Acta, Vol. 258 https://doi.org/10.1016/j.electacta.2017.11.164	journal	December 2017
Temperature and strain rate dependent behavior of polymer separator for Li-ion batteries Kalnaus, Sergiy; Wang, Yanli; Li, Jianlin Extreme Mechanics Letters, Vol. 20 https://doi.org/10.1016/j.eml.2018.01.006	journal	April 2018
Features of mechanical behavior of EV battery modules under high deformation rate Kalnaus, Sergiy; Wang, Hsin; Watkins, Thomas R. Extreme Mechanics Letters, Vol. 32 https://doi.org/10.1016/j.eml.2019.100550	journal	October 2019
Carbon fiber reinforced structural lithium-ion battery composite: Multifunctional power integration for CubeSats Moyer, Kathleen; Meng, Chuanzhe; Marshall, Breeanne Energy Storage Materials, Vol. 24 https://doi.org/10.1016/j.ensm.2019.08.003	journal	January 2020
A three-dimensional interconnected polymer/ceramic composite as a thin film solid electrolyte Palmer, Max J.; Kalnaus, Sergiy; Dixit, Marm B. Energy Storage Materials, Vol. 26 https://doi.org/10.1016/j.ensm.2019.12.031	journal	April 2020
Anomalously high elastic modulus of a poly(ethylene oxide)-based composite electrolyte Yang, Guang; Lehmann, Michelle L.; Zhao, Sheng Energy Storage Materials, Vol. 35 https://doi.org/10.1016/j.ensm.2020.11.031	journal	March 2021
Porous silicon–graphene–carbon composite as high performance anode material for lithium ion batteries Huang, Yuehua; Luo, Jing; Peng, Jiao Journal of Energy Storage, Vol. 27 https://doi.org/10.1016/j.est.2019.101075	journal	February 2020
Challenges and opportunities toward fast-charging of lithium-ion batteries Xie, Wenlong; Liu, Xinhua; He, Rong Journal of Energy Storage, Vol. 32 https://doi.org/10.1016/j.est.2020.101837	journal	December 2020
Dynamic impact tests on lithium-ion cells Kisters, Thomas; Sahraei, Elham; Wierzbicki, Tomasz International Journal of Impact Engineering, Vol. 108 https://doi.org/10.1016/j.ijimpeng.2017.04.025	journal	October 2017
Fabrication of multi-shell coated silicon nanoparticles via in-situ electroless deposition as high performance anodes for lithium ion batteries Ren, Wen-Feng; Li, Jun-Tao; Zhang, Shao-Jian Journal of Energy Chemistry, Vol. 48 https://doi.org/10.1016/j.jechem.2020.01.001	journal	September 2020
Limiting Internal Short-Circuit Damage by Electrode Partition for Impact-Tolerant Li-Ion Batteries Naguib, Michael; Allu, Srikanth; Simunovic, Srdjan Joule, Vol. 2, Issue 1 https://doi.org/10.1016/j.joule.2017.11.003	journal	January 2018
High-Efficiency Lithium Metal Batteries with Fire-Retardant Electrolytes Chen, Shuru; Zheng, Jianming; Yu, Lu Joule, Vol. 2, Issue 8 https://doi.org/10.1016/j.joule.2018.05.002	journal	August 2018
Electric Vehicles Batteries: Requirements and Challenges Deng, Jie; Bae, Chulheung; Denlinger, Adam Joule, Vol. 4, Issue 3 https://doi.org/10.1016/j.joule.2020.01.013	journal	March 2020
High-Performance Structural Batteries Hopkins, Brandon J.; Long, Jeffrey W.; Rolison, Debra R. Joule, Vol. 4, Issue 11 https://doi.org/10.1016/j.joule.2020.07.027	journal	November 2020
Safety mechanisms in lithium-ion batteries Balakrishnan, P. G.; Ramesh, R.; Prem Kumar, T. Journal of Power Sources, Vol. 155, Issue 2 https://doi.org/10.1016/j.jpowsour.2005.12.002	journal	April 2006
Advanced, high-performance composite polymer electrolytes for lithium batteries Croce, F.; Sacchetti, S.; Scrosati, B. Journal of Power Sources, Vol. 161, Issue 1 https://doi.org/10.1016/j.jpowsour.2006.03.069	journal	October 2006
A review on the separators of liquid electrolyte Li-ion batteries Zhang, Sheng Shui Journal of Power Sources, Vol. 164, Issue 1 https://doi.org/10.1016/j.jpowsour.2006.10.065	journal	January 2007
Design and fabrication of multifunctional structural batteries Liu, Ping; Sherman, Elena; Jacobsen, Alan Journal of Power Sources, Vol. 189, Issue 1 https://doi.org/10.1016/j.jpowsour.2008.09.082	journal	April 2009
Materials processing for lithium-ion batteries Li, Jianlin; Daniel, Claus; Wood, David Journal of Power Sources, Vol. 196, Issue 5, p. 2452-2460 https://doi.org/10.1016/j.jpowsour.2010.11.001	journal	March 2011
High-strength all-solid lithium ion electrodes based on Li4Ti5O12 Sun, Li; Karanjgaokar, Nikhil; Sun, Ke Journal of Power Sources, Vol. 196, Issue 15 https://doi.org/10.1016/j.jpowsour.2011.03.045	journal	August 2011
Design of composite polymer electrolytes for Li ion batteries based on mechanical stability criteria Kalnaus, Sergiy; Sabau, Adrian S.; Tenhaeff, Wyatt E. Journal of Power Sources, Vol. 201 https://doi.org/10.1016/j.jpowsour.2011.11.020	journal	March 2012
Correlationship between electrode mechanics and long-term cycling performance for graphite anode in lithium ion cells Zheng, Honghe; Zhang, Li; Liu, Gao Journal of Power Sources, Vol. 217 https://doi.org/10.1016/j.jpowsour.2012.06.045	journal	November 2012
Analysis of composite electrolytes with sintered reinforcement structure for energy storage applications Kalnaus, Sergiy; Tenhaeff, Wyatt E.; Sakamoto, Jeffrey Journal of Power Sources, Vol. 241 https://doi.org/10.1016/j.jpowsour.2013.04.096	journal	November 2013
Evaluation of mechanical abuse techniques in lithium ion batteries Lamb, Joshua; Orendorff, Christopher J. Journal of Power Sources, Vol. 247 https://doi.org/10.1016/j.jpowsour.2013.08.066	journal	February 2014
Impact of the flame retardant additive triphenyl phosphate (TPP) on the performance of graphite/LiFePO4 cells in high power applications Ciosek Högström, Katarzyna; Lundgren, Henrik; Wilken, Susanne Journal of Power Sources, Vol. 256 https://doi.org/10.1016/j.jpowsour.2014.01.022	journal	June 2014
Safer lithium ion batteries based on nonflammable electrolyte Zeng, Ziqi; Wu, Bingbin; Xiao, Lifen Journal of Power Sources, Vol. 279 https://doi.org/10.1016/j.jpowsour.2014.12.150	journal	April 2015
Microscale failure mechanisms leading to internal short circuit in Li-ion batteries under complex loading scenarios Sahraei, Elham; Bosco, Emanuela; Dixon, Brandy Journal of Power Sources, Vol. 319 https://doi.org/10.1016/j.jpowsour.2016.04.005	journal	July 2016
Mechanical behavior and failure mechanisms of Li-ion battery separators Kalnaus, Sergiy; Wang, Yanli; Turner, John A. Journal of Power Sources, Vol. 348 https://doi.org/10.1016/j.jpowsour.2017.03.003	journal	April 2017
Internal-short-mitigating current collector for lithium-ion battery Wang, Meng; Le, Anh V.; Noelle, Daniel J. Journal of Power Sources, Vol. 349, p. 84-93 https://doi.org/10.1016/j.jpowsour.2017.03.004	journal	May 2017
Facile and scalable fabrication of polymer-ceramic composite electrolyte with high ceramic loadings Pandian, Amaresh Samuthira; Chen, X. Chelsea; Chen, Jihua Journal of Power Sources, Vol. 390 https://doi.org/10.1016/j.jpowsour.2018.04.006	journal	June 2018
Effect of packaging and cooling plates on mechanical response and failure characteristics of automotive Li-ion battery modules Kalnaus, Sergiy; Wang, Hsin; Watkins, Thomas R. Journal of Power Sources, Vol. 403 https://doi.org/10.1016/j.jpowsour.2018.09.071	journal	November 2018
Multifunctional energy storage composite structures with embedded lithium-ion batteries Ladpli, Purim; Nardari, Raphael; Kopsaftopoulos, Fotis Journal of Power Sources, Vol. 414 https://doi.org/10.1016/j.jpowsour.2018.12.051	journal	February 2019
A shear thickening fluid based impact resistant electrolyte for safe Li-ion batteries Liu, Kewei; Cheng, Chung-Fu; Zhou, Leyao Journal of Power Sources, Vol. 423 https://doi.org/10.1016/j.jpowsour.2019.03.056	journal	May 2019
Multifunctional sandwich composites containing embedded lithium-ion polymer batteries under bending loads Galos, J.; Best, A. S.; Mouritz, A. P. Materials & Design, Vol. 185 https://doi.org/10.1016/j.matdes.2019.108228	journal	January 2020
Temperature-dependent on/off PVP@TiO2 separator for safe Li-storage Jiang, Yunhong; Ding, Yanhuai; Zhang, Ping Journal of Membrane Science, Vol. 565 https://doi.org/10.1016/j.memsci.2018.08.008	journal	November 2018
PEO/garnet composite electrolytes for solid-state lithium batteries: From “ceramic-in-polymer” to “polymer-in-ceramic” Chen, Long; Li, Yutao; Li, Shuai-Peng Nano Energy, Vol. 46 https://doi.org/10.1016/j.nanoen.2017.12.037	journal	April 2018
Progress of enhancing the safety of lithium ion battery from the electrolyte aspect Wang, Qingsong; Jiang, Lihua; Yu, Yan Nano Energy, Vol. 55 https://doi.org/10.1016/j.nanoen.2018.10.035	journal	January 2019
Review on composite polymer electrolytes for lithium batteries Manuel Stephan, A.; Nahm, K. S. Polymer, Vol. 47, Issue 16 https://doi.org/10.1016/j.polymer.2006.05.069	journal	July 2006
Combined effect of Al2O3 nano-fillers and EC plasticizer on ionic conductivity enhancement in the solid polymer electrolyte (PEO)9LiTf Pitawala, H. M. J. C.; Dissanayake, M. A. K. L.; Seneviratne, V. A. Solid State Ionics, Vol. 178, Issue 13-14 https://doi.org/10.1016/j.ssi.2007.04.008	journal	May 2007
New structural lithium battery electrolytes using thiol–ene chemistry Willgert, Markus; Kjell, Maria H.; Lindbergh, Göran Solid State Ionics, Vol. 236 https://doi.org/10.1016/j.ssi.2013.01.019	journal	April 2013
Effect of TiO2 nano-filler and EC plasticizer on electrical and thermal properties of poly(ethylene oxide) (PEO) based solid polymer electrolytes Vignarooban, K.; Dissanayake, M. A. K. L.; Albinsson, I. Solid State Ionics, Vol. 266 https://doi.org/10.1016/j.ssi.2014.08.002	journal	November 2014
Microstructure and temperature dependent lithium ion transport of ceramic–polymer composite electrolyte for solid-state lithium ion batteries based on garnet-type Li7La3Zr2O12 Langer, Frederieke; Bardenhagen, Ingo; Glenneberg, Jens Solid State Ionics, Vol. 291 https://doi.org/10.1016/j.ssi.2016.04.014	journal	August 2016
Evolution of Structure and Lithium Dynamics in LiNi _0.8 Mn _0.1 Co _0.1 O ₂ (NMC811) Cathodes during Electrochemical Cycling Märker, Katharina; Reeves, Philip J.; Xu, Chao Chemistry of Materials, Vol. 31, Issue 7 https://doi.org/10.1021/acs.chemmater.9b00140	journal	March 2019
Multifunctional Structural Ultrabattery Composite Meng, Chuanzhe; Muralidharan, Nitin; Teblum, Eti Nano Letters, Vol. 18, Issue 12 https://doi.org/10.1021/acs.nanolett.8b03510	journal	November 2018
Fire-Retardant Phosphate-Based Electrolytes for High-Performance Lithium Metal Batteries Dong, Yang; Zhang, Ning; Li, Cuixia ACS Applied Energy Materials, Vol. 2, Issue 4 https://doi.org/10.1021/acsaem.9b00027	journal	March 2019
Bicontinuous Electrolytes via Thermally Initiated Polymerization for Structural Lithium Ion Batteries Schneider, Lynn M.; Ihrner, Niklas; Zenkert, Dan ACS Applied Energy Materials, Vol. 2, Issue 6 https://doi.org/10.1021/acsaem.9b00563	journal	May 2019
High Modulus, Thermally Stable, and Self-Extinguishing Aramid Nanofiber Separators Patel, Anish; Wilcox, Kathryn; Li, Zhuo ACS Applied Materials & Interfaces, Vol. 12, Issue 23 https://doi.org/10.1021/acsami.0c03671	journal	May 2020
Direct Measure of Electrode Spatial Heterogeneity: Influence of Processing Conditions on Anode Architecture and Performance Burdette-Trofimov, Mary K.; Armstrong, Beth L.; Nelson Weker, Johanna ACS Applied Materials & Interfaces, Vol. 12, Issue 50 https://doi.org/10.1021/acsami.0c17019	journal	December 2020
A Highly Thermostable Ceramic-Grafted Microporous Polyethylene Separator for Safer Lithium-Ion Batteries Zhu, Xiaoming; Jiang, Xiaoyu; Ai, Xinping ACS Applied Materials & Interfaces, Vol. 7, Issue 43 https://doi.org/10.1021/acsami.5b07230	journal	October 2015
Shear Thickening Electrolyte Built from Sterically Stabilized Colloidal Particles Shen, Brian H.; Armstrong, Beth L.; Doucet, Mathieu ACS Applied Materials & Interfaces, Vol. 10, Issue 11 https://doi.org/10.1021/acsami.7b19441	journal	February 2018
Scalable Freeze-Tape-Casting Fabrication and Pore Structure Analysis of 3D LLZO Solid-State Electrolytes Shen, Hao; Yi, Eongyu; Heywood, Stephen ACS Applied Materials & Interfaces, Vol. 12, Issue 3 https://doi.org/10.1021/acsami.9b11780	journal	December 2019
Shear Thickening Electrolytes for High Impact Resistant Batteries Veith, Gabriel M.; Armstrong, Beth L.; Wang, Hsin ACS Energy Letters, Vol. 2, Issue 9 https://doi.org/10.1021/acsenergylett.7b00511	journal	August 2017
Pure Inorganic Separator for Lithium Ion Batteries He, Meinan; Zhang, Xinjie; Jiang, Kuiyang ACS Applied Materials & Interfaces, Vol. 7, Issue 1 https://doi.org/10.1021/am507145h	journal	December 2014
Electrochemical and Mechanical Behavior in Mechanically Robust Solid Polymer Electrolytes for Use in Multifunctional Structural Batteries Snyder, James F.; Carter, Robert H.; Wetzel, Eric D. Chemistry of Materials, Vol. 19, Issue 15 https://doi.org/10.1021/cm070213o	journal	July 2007
Ultra Strong Silicon-Coated Carbon Nanotube Nonwoven Fabric as a Multifunctional Lithium-Ion Battery Anode Evanoff, Kara; Benson, Jim; Schauer, Mark ACS Nano, Vol. 6, Issue 11 https://doi.org/10.1021/nn303393p	journal	October 2012
Nanocomposite polymer electrolytes for lithium batteries Croce, F.; Appetecchi, G. B.; Persi, L. Nature, Vol. 394, Issue 6692 https://doi.org/10.1038/28818	journal	July 1998
Safety modelling and testing of lithium-ion batteries in electrified vehicles Deng, Jie; Bae, Chulheung; Marcicki, James Nature Energy, Vol. 3, Issue 4 https://doi.org/10.1038/s41560-018-0122-3	journal	April 2018
Smart Multifunctional Fluids for Lithium Ion Batteries: Enhanced Rate Performance and Intrinsic Mechanical Protection Ding, Jie; Tian, Tongfei; Meng, Qing Scientific Reports, Vol. 3, Issue 1 https://doi.org/10.1038/srep02485	journal	August 2013
Cheap glass fiber mats as a matrix of gel polymer electrolytes for lithium ion batteries Zhu, Yusong; Wang, Faxing; Liu, Lili Scientific Reports, Vol. 3, Issue 1 https://doi.org/10.1038/srep03187	journal	November 2013
Nanocomposite polymer membrane derived from nano TiO ₂ -PMMA and glass fiber nonwoven: high thermal endurance and cycle stability in lithium ion battery applications Zhang, Sen; Cao, Jiang; Shang, Yuming Journal of Materials Chemistry A, Vol. 3, Issue 34 https://doi.org/10.1039/C5TA02781K	journal	January 2015
Guidelines and trends for next-generation rechargeable lithium and lithium-ion batteries Wu, Feixiang; Maier, Joachim; Yu, Yan Chemical Society Reviews, Vol. 49, Issue 5 https://doi.org/10.1039/C7CS00863E	journal	January 2020
Flexible inorganic membranes used as a high thermal safety separator for the lithium-ion battery Shi, Chuan; Zhu, Jianwei; Shen, Xiu RSC Advances, Vol. 8, Issue 8 https://doi.org/10.1039/C7RA13058A	journal	January 2018
Structural lithium ion battery electrolytes via reaction induced phase-separation Ihrner, N.; Johannisson, W.; Sieland, F. Journal of Materials Chemistry A, Vol. 5, Issue 48 https://doi.org/10.1039/C7TA04684G	journal	January 2017
Multifunctional nanocomposite structural separators for energy storage Acauan, Luiz H.; Zhou, Yue; Kalfon-Cohen, Estelle Nanoscale, Vol. 11, Issue 45 https://doi.org/10.1039/C9NR06954B	journal	January 2019
Highly flexible and mechanically strong polyaniline nanostructure @ aramid nanofiber films for free-standing supercapacitor electrodes Yin, Qing; Jia, Hongbing; Mohamed, Amel Nanoscale, Vol. 12, Issue 9 https://doi.org/10.1039/C9NR09272B	journal	January 2020
High rate hybrid MnO ₂ @CNT fabric anodes for Li-ion batteries: properties and a lithium storage mechanism study by in situ synchrotron X-ray scattering Rana, Moumita; Sai Avvaru, Venkata; Boaretto, Nicola Journal of Materials Chemistry A, Vol. 7, Issue 46 https://doi.org/10.1039/C9TA08800H	journal	January 2019
Branched aramid nanofiber-polyaniline electrodes for structural energy storage Flouda, Paraskevi; Quinn, Alexander H.; Patel, Anish G. Nanoscale, Vol. 12, Issue 32 https://doi.org/10.1039/D0NR04573J	journal	January 2020
Polymer reinforced carbon fiber interfaces for high energy density structural lithium-ion batteries Moyer, Kathleen; Boucherbil, Nora Ait; Zohair, Murtaza Sustainable Energy & Fuels, Vol. 4, Issue 6 https://doi.org/10.1039/D0SE00263A	journal	January 2020
The right kind of interior for multifunctional electrode architectures: carbon nanofoam papers with aperiodic submicrometre pore networks interconnected in 3D Lytle, Justin C.; Wallace, Jean Marie; Sassin, Megan B. Energy & Environmental Science, Vol. 4, Issue 5 https://doi.org/10.1039/c0ee00351d	journal	January 2011
Investigating phase transformation in the Li1.2Co0.1Mn0.55Ni0.15O2 lithium-ion battery cathode during high-voltage hold (4.5 V) via magnetic, X-ray diffraction and electron microscopy studies Mohanty, Debasish; Sefat, Athena S.; Kalnaus, Sergiy Journal of Materials Chemistry A, Vol. 1, Issue 20 https://doi.org/10.1039/c3ta10304h	journal	January 2013
Sigmoidal current collector for lithium-ion battery Wang, Meng; Le, Anh V.; Shi, Yang Journal of Applied Physics, Vol. 121, Issue 1 https://doi.org/10.1063/1.4973585	journal	January 2017
Properties of mixed polymer and crystalline ionic conductors Croce, F.; Bonino, F.; Panero, S. Philosophical Magazine B, Vol. 59, Issue 1 https://doi.org/10.1080/13642818908208455	journal	January 1989
Graphitic microstructure and performance of carbon fibre Li-ion structural battery electrodes Fredi, Giulia; Jeschke, Steffen; Boulaoued, Athmane Multifunctional Materials, Vol. 1, Issue 1 https://doi.org/10.1088/2399-7532/aab707	journal	August 2018
Model of a structural battery and its potential for system level mass savings Johannisson, Wilhelm; Zenkert, Dan; Lindbergh, Göran Multifunctional Materials, Vol. 2, Issue 3 https://doi.org/10.1088/2399-7532/ab3bdd	journal	September 2019
Performance of bicontinuous structural electrolytes Tu, Vinh; Asp, Leif E.; Shirshova, Natasha Multifunctional Materials, Vol. 3, Issue 2 https://doi.org/10.1088/2399-7532/ab8d9b	journal	June 2020
A residual performance methodology to evaluate multifunctional systems Johannisson, Wilhelm; Nguyen, Sang; Lindbergh, Göran Multifunctional Materials, Vol. 3, Issue 2 https://doi.org/10.1088/2399-7532/ab8e95	journal	June 2020
Structural battery composites: a review Asp, Leif E.; Johansson, Mats; Lindbergh, Göran Functional Composites and Structures, Vol. 1, Issue 4 https://doi.org/10.1088/2631-6331/ab5571	journal	November 2019
PowerCore combining structure and batteries for increased energy to weight ratio Lyman, P. C.; Feaver, T. L. IEEE Aerospace and Electronic Systems Magazine, Vol. 13, Issue 9 https://doi.org/10.1109/62.715539	journal	January 1998
Polymer Electrolytes Hallinan, Daniel T.; Balsara, Nitash P. Annual Review of Materials Research, Vol. 43, Issue 1 https://doi.org/10.1146/annurev-matsci-071312-121705	journal	July 2013
Lithium Ion Transfer at the Interface between Lithium-Ion-Conductive Solid Crystalline Electrolyte and Polymer Electrolyte Abe, Takeshi; Ohtsuka, Masahiro; Sagane, Fumihiro Journal of The Electrochemical Society, Vol. 151, Issue 11 https://doi.org/10.1149/1.1804813	journal	January 2004
Solvent-Free Composite PEO-Ceramic Fiber/Mat Electrolytes for Lithium Secondary Cells Wang, Chunsheng; Zhang, Xiang-Wu; Appleby, A. John Journal of The Electrochemical Society, Vol. 152, Issue 1 https://doi.org/10.1149/1.1828952	journal	January 2005
Composite Polymer Electrolytes Capuano, F.; Croce, F.; Scrosati, B. Journal of The Electrochemical Society, Vol. 138, Issue 7 https://doi.org/10.1149/1.2085900	journal	July 1991
Evaluation of Commercially Available Carbon Fibers, Fabrics, and Papers for Potential Use in Multifunctional Energy Storage Applications Snyder, James F.; Wong, Emma L.; Hubbard, Clifford W. Journal of The Electrochemical Society, Vol. 156, Issue 3 https://doi.org/10.1149/1.3065070	journal	January 2009
Ionic Transport Across Interfaces of Solid Glass and Polymer Electrolytes for Lithium Ion Batteries Tenhaeff, W. E.; Yu, X.; Hong, K. Journal of The Electrochemical Society, Vol. 158, Issue 10 https://doi.org/10.1149/1.3625281	journal	January 2011
High Precision Coulometry of Commercial PAN-Based Carbon Fibers as Electrodes in Structural Batteries Hagberg, Johan; Leijonmarck, Simon; Lindbergh, Göran Journal of The Electrochemical Society, Vol. 163, Issue 8 https://doi.org/10.1149/2.0041609jes	journal	January 2016
Review—Li-Rich Layered Oxide Cathodes for Next-Generation Li-Ion Batteries: Chances and Challenges Rozier, Patrick; Tarascon, Jean Marie Journal of The Electrochemical Society, Vol. 162, Issue 14 https://doi.org/10.1149/2.0111514jes	journal	January 2015
PAN-Based Carbon Fiber Negative Electrodes for Structural Lithium-Ion Batteries Kjell, Maria H.; Jacques, Eric; Zenkert, Dan Journal of The Electrochemical Society, Vol. 158, Issue 12 https://doi.org/10.1149/2.053112jes	journal	January 2011
Impedance Characterization of Li Ion Transport at the Interface between Laminated Ceramic and Polymeric Electrolytes Tenhaeff, W. E.; Perry, K. A.; Dudney, N. J. Journal of The Electrochemical Society, Vol. 159, Issue 12 https://doi.org/10.1149/2.063212jes	journal	January 2012
Predictive Design of Shear-Thickening Electrolytes for Safety Considerations Shen, Brian H.; Veith, Gabriel M.; Armstrong, Beth L. Journal of The Electrochemical Society, Vol. 164, Issue 12 https://doi.org/10.1149/2.1171712jes	journal	January 2017
Energy Storage Structural Composites: a Review Pereira, Tony; Nieh, S. Journal of Composite Materials, Vol. 43, Issue 5 https://doi.org/10.1177/0021998308097682	journal	January 2009
Multifunctional carbon nanotube–epoxy composites for thermal energy management Kaul, Pankaj B.; Bifano, Michael FP; Prakash, Vikas Journal of Composite Materials, Vol. 47, Issue 1 https://doi.org/10.1177/0021998312453750	journal	January 2013
Multifunctional structure-battery composites for marine systems Thomas, Jp; Qidwai, Sm; Pogue, Wr Journal of Composite Materials, Vol. 47, Issue 1 https://doi.org/10.1177/0021998312460262	journal	October 2012
Manufacturability of composite laminates with integrated thin film Li-ion batteries Gasco, Federico; Feraboli, Paolo Journal of Composite Materials, Vol. 48, Issue 8 https://doi.org/10.1177/0021998313480195	journal	March 2013
Performance metrics for structural composites with electrochemical multifunctionality Snyder, Jf; Gienger, Eb; Wetzel, Ed Journal of Composite Materials, Vol. 49, Issue 15 https://doi.org/10.1177/0021998314568167	journal	February 2015
Effects of carbon fiber electrode deformation in multifunctional structural lithium ion batteries Kim, Hyon C.; Sastry, Ann M. Journal of Intelligent Material Systems and Structures, Vol. 23, Issue 16 https://doi.org/10.1177/1045389X12449914	journal	July 2012
Multifunctional structural lithium-ion battery for electric vehicles Zhang, Yancheng; Ma, Jun; Singh, Abhendra K. Journal of Intelligent Material Systems and Structures, Vol. 28, Issue 12 https://doi.org/10.1177/1045389X16679021	journal	November 2016
Structural batteries made from fibre reinforced composites Ekstedt, S.; Wysocki, M.; Asp, L. E. Plastics, Rubber and Composites, Vol. 39, Issue 3-5 https://doi.org/10.1179/174328910X12647080902259	journal	June 2010
Effects of mechanical deformation on electric performance of rechargeable batteries embedded in load carrying composite structures Shalouf, S. M.; Zhang, J.; Wang, C. H. Plastics, Rubber and Composites, Vol. 43, Issue 3 https://doi.org/10.1179/1743289813Y.0000000064	journal	December 2013
Satellite multi-functional power structure: Feasibility and mass savings Roberts, S. C.; Aglietti, G. S. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, Vol. 222, Issue 1 https://doi.org/10.1243/09544100JAERO255	journal	January 2008
Layered Lithium Insertion Material of LiCo _1/3 Ni _1/3 Mn _1/3 O ₂ for Lithium-Ion Batteries Ohzuku, Tsutomu; Makimura, Yoshinari Chemistry Letters, Vol. 30, Issue 7 https://doi.org/10.1246/cl.2001.642	journal	July 2001
Understanding the structure and structural degradation mechanisms in high-voltage, lithium-manganese–rich lithium-ion battery cathode oxides: A review of materials diagnostics Mohanty, Debasish; Li, Jianlin; Nagpure, Shrikant C. MRS Energy & Sustainability, Vol. 2 https://doi.org/10.1557/mre.2015.16	journal	January 2015
High Temperature Stable Separator for Lithium Batteries Based on SiO2 and Hydroxypropyl Guar Gum Carvalho, Diogo; Loeffler, Nicholas; Kim, Guk-Tae Membranes, Vol. 5, Issue 4 https://doi.org/10.3390/membranes5040632	journal	October 2015
The Effect of Glass Fabric Separator Elongation on Electric Property in Structural Battery [유리섬유 분리막 인장으로 인한 구조전지의 전기적 물성 변화] Shin, Jae-Sung; Park, Hyun-Wook; Park, Mi-Young Composites Research, Vol. 30, Issue 1 https://doi.org/10.7234/composres.2017.30.1.046	journal	February 2017

Similar Records

Multifunctional materials

Conference · Mon Jan 01 04:00:00 UTC 1990 · OSTI ID:5162499

Buckley, A; Gallagher-Daggitt, G; Karasz, F E; +1 more

Exploring the Promise of Multifunctional “Zintl-Phase-Forming” Electrolytes for Si-Based Full Cells

Journal Article · Mon Nov 28 00:00:00 UTC 2022 · ACS Applied Materials and Interfaces · OSTI ID:2283200

Yang, Zhenzhen; Trask, Stephen E.; Gilbert, James A.; +5 more

All Solid State Batteries Enabled by Multifunctional Electrolyte Materials

Technical Report · Fri Dec 30 04:00:00 UTC 2022 · OSTI ID:1906484

Zhang, Pu

Related Subjects

25 ENERGY STORAGE
Li-ion
energy storage
lithium
multifunctional
safety

Title: Multifunctional approaches for safe structural batteries

Citation Formats

References (141)

Similar Records

Related Subjects