Screening for extractables in additive-manufactured acrylonitrile butadiene styrene orthopedic cast

Nahan, Keaton; Sussman, Eric M.; Oktem, Berk; Schultheis, Lester; Wickramasekara, Samanthi

doi:10.1016/j.talanta.2019.120464

Title: Screening for extractables in additive-manufactured acrylonitrile butadiene styrene orthopedic cast

Authors:: Nahan, Keaton; Sussman, Eric M.; Oktem, Berk; Schultheis, Lester; Wickramasekara, Samanthi

Publication Date:: Fri May 01 00:00:00 EDT 2020

Sponsoring Org.:: USDOE

OSTI Identifier:: 1682491

Resource Type:: Publisher's Accepted Manuscript

Journal Name:: Talanta

Additional Journal Information:: Journal Name: Talanta Journal Volume: 212 Journal Issue: C; Journal ID: ISSN 0039-9140

Publisher:: Elsevier

Country of Publication:: United Kingdom

Language:: English

Citation Formats


                    Nahan, Keaton, Sussman, Eric M., Oktem, Berk, Schultheis, Lester, and Wickramasekara, Samanthi. Screening for extractables in additive-manufactured acrylonitrile butadiene styrene orthopedic cast.  United Kingdom: N. p., 2020. 
Web.  doi:10.1016/j.talanta.2019.120464.

Copy to clipboard


                    Nahan, Keaton, Sussman, Eric M., Oktem, Berk, Schultheis, Lester, & Wickramasekara, Samanthi. Screening for extractables in additive-manufactured acrylonitrile butadiene styrene orthopedic cast.  United Kingdom.  https://doi.org/10.1016/j.talanta.2019.120464

Copy to clipboard


                    Nahan, Keaton, Sussman, Eric M., Oktem, Berk, Schultheis, Lester, and Wickramasekara, Samanthi. Fri .  
"Screening for extractables in additive-manufactured acrylonitrile butadiene styrene orthopedic cast".  United Kingdom.  https://doi.org/10.1016/j.talanta.2019.120464.

Copy to clipboard


                    
@article{osti_1682491,

  title        = {Screening for extractables in additive-manufactured acrylonitrile butadiene styrene orthopedic cast},

  author       = {Nahan, Keaton and Sussman, Eric M. and Oktem, Berk and Schultheis, Lester and Wickramasekara, Samanthi},

  abstractNote = {},

  doi          = {10.1016/j.talanta.2019.120464},

  journal      = {Talanta},

  number       = C,

  volume       = 212,

  place        = {United Kingdom},

  year         = {Fri May 01 00:00:00 EDT 2020},

  month        = {Fri May 01 00:00:00 EDT 2020}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (Publisher)

Publisher's Version of Record
https://doi.org/10.1016/j.talanta.2019.120464

Other availability

Search WorldCat to find libraries that may hold this journal

Save / Share:

Export Metadata

Save to My Library

Works referenced in this record:

A global sustainability perspective on 3D printing technologies
journal, November 2014

Gebler, Malte; Schoot Uiterkamp, Anton J. M.; Visser, Cindy
Energy Policy, Vol. 74
DOI: 10.1016/j.enpol.2014.08.033

Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditions
journal, June 2014

Tymrak, B. M.; Kreiger, M.; Pearce, J. M.
Materials & Design, Vol. 58
DOI: 10.1016/j.matdes.2014.02.038

Integration of 3D printing and additive manufacturing in the interventional pulmonologist's toolbox
journal, January 2018

Guibert, Nicolas; Mhanna, Laurent; Didier, Alain
Respiratory Medicine, Vol. 134
DOI: 10.1016/j.rmed.2017.11.019

The potential of 3D printing in urological research and patient care
journal, February 2018

Colaco, Marc; Igel, Daniel A.; Atala, Anthony
Nature Reviews Urology, Vol. 15, Issue 4
DOI: 10.1038/nrurol.2018.6

Printing and Prototyping of Tissues and Scaffolds
journal, November 2012

Derby, B.
Science, Vol. 338, Issue 6109
DOI: 10.1126/science.1226340

A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
journal, February 2016

Kang, Hyun-Wook; Lee, Sang Jin; Ko, In Kap
Nature Biotechnology, Vol. 34, Issue 3
DOI: 10.1038/nbt.3413

Additive manufacturing of tissues and organs
journal, August 2012

Melchels, Ferry P. W.; Domingos, Marco A. N.; Klein, Travis J.
Progress in Polymer Science, Vol. 37, Issue 8
DOI: 10.1016/j.progpolymsci.2011.11.007

Controlling release from 3D printed medical devices using CLIP and drug-loaded liquid resins
journal, May 2018

Bloomquist, Cameron J.; Mecham, Michael B.; Paradzinsky, Mark D.
Journal of Controlled Release, Vol. 278
DOI: 10.1016/j.jconrel.2018.03.026

The Emerging Role of 3D Printing in Arthroplasty and Orthopedics
journal, August 2018

Trauner, Kenneth B.
The Journal of Arthroplasty, Vol. 33, Issue 8
DOI: 10.1016/j.arth.2018.02.033

A personalized 3D-printed prosthetic joint replacement for the human temporomandibular joint: From implant design to implantation
journal, May 2017

Ackland, David C.; Robinson, Dale; Redhead, Michael
Journal of the Mechanical Behavior of Biomedical Materials, Vol. 69
DOI: 10.1016/j.jmbbm.2017.01.048

The future of dental devices is digital
journal, January 2012

van Noort, Richard
Dental Materials, Vol. 28, Issue 1
DOI: 10.1016/j.dental.2011.10.014

Standardization in additive manufacturing: activities carried out by international organizations and projects
journal, September 2014

Monzón, M. D.; Ortega, Z.; Martínez, A.
The International Journal of Advanced Manufacturing Technology, Vol. 76, Issue 5-8
DOI: 10.1007/s00170-014-6334-1

Fabrication of low cost soft tissue prostheses with the desktop 3D printer
journal, November 2014

He, Yong; Xue, Guang-huai; Fu, Jian-zhong
Scientific Reports, Vol. 4, Issue 1
DOI: 10.1038/srep06973

Regulatory Considerations in the Design and Manufacturing of Implantable 3D-Printed Medical Devices: Regulatory Considerations of 3D-Printed Implants
journal, August 2015

Morrison, Robert J.; Kashlan, Khaled N.; Flanangan, Colleen L.
Clinical and Translational Science, Vol. 8, Issue 5
DOI: 10.1111/cts.12315

Assessing and Reducing the Toxicity of 3D-Printed Parts
journal, November 2015

Oskui, Shirin Mesbah; Diamante, Graciel; Liao, Chunyang
Environmental Science & Technology Letters, Vol. 3, Issue 1
DOI: 10.1021/acs.estlett.5b00249

Additively manufactured medical products – the FDA perspective
journal, December 2016

Di Prima, Matthew; Coburn, James; Hwang, David
3D Printing in Medicine, Vol. 2, Issue 1
DOI: 10.1186/s41205-016-0005-9

Emissions of Ultrafine Particles and Volatile Organic Compounds from Commercially Available Desktop Three-Dimensional Printers with Multiple Filaments
journal, January 2016

Azimi, Parham; Zhao, Dan; Pouzet, Claire
Environmental Science & Technology, Vol. 50, Issue 3
DOI: 10.1021/acs.est.5b04983

Emissions of Nanoparticles and Gaseous Material from 3D Printer Operation
journal, October 2015

Kim, Yuna; Yoon, Chungsik; Ham, Seunghon
Environmental Science & Technology, Vol. 49, Issue 20
DOI: 10.1021/acs.est.5b02805

Inhalation exposure to three-dimensional printer emissions stimulates acute hypertension and microvascular dysfunction
journal, November 2017

Stefaniak, A. B.; LeBouf, R. F.; Duling, M. G.
Toxicology and Applied Pharmacology, Vol. 335
DOI: 10.1016/j.taap.2017.09.016

Characterization and Control of Nanoparticle Emission during 3D Printing
journal, August 2017

Kwon, Ohhun; Yoon, Chungsik; Ham, Seunghon
Environmental Science & Technology, Vol. 51, Issue 18
DOI: 10.1021/acs.est.7b01454

Characterization of chemical contaminants generated by a desktop fused deposition modeling 3-dimensional Printer
journal, June 2017

Stefaniak, Aleksandr B.; LeBouf, Ryan F.; Yi, Jinghai
Journal of Occupational and Environmental Hygiene, Vol. 14, Issue 7
DOI: 10.1080/15459624.2017.1302589

Detection and Identification of Leachables in Vaccine from Plastic Packaging Materials Using UPLC-QTOF MS with Self-Built Polymer Additives Library
journal, June 2016

Zhang, Yun; Sun, Shuqi; Xing, Xuebin
Analytical Chemistry, Vol. 88, Issue 13
DOI: 10.1021/acs.analchem.6b01027

Qualitative assessment of extractables from single-use components and the impact of reference standard selection
journal, February 2018

Jordi, Mark Anderson; Khera, Smriti; Roland, Kevin
Journal of Pharmaceutical and Biomedical Analysis, Vol. 150
DOI: 10.1016/j.jpba.2017.12.029

Large-Scale Assessment of Extractables and Leachables in Single-Use Bags for Biomanufacturing
journal, June 2018

Dorival-García, Noemí; Carillo, Sara; Ta, Christine
Analytical Chemistry, Vol. 90, Issue 15
DOI: 10.1021/acs.analchem.8b01208

Identifying Small Molecules via High Resolution Mass Spectrometry: Communicating Confidence
journal, February 2014

Schymanski, Emma L.; Jeon, Junho; Gulde, Rebekka
Environmental Science & Technology, Vol. 48, Issue 4
DOI: 10.1021/es5002105

A tutorial in small molecule identification via electrospray ionization-mass spectrometry: The practical art of structural elucidation
journal, November 2017

De Vijlder, Thomas; Valkenborg, Dirk; Lemière, Filip
Mass Spectrometry Reviews, Vol. 37, Issue 5
DOI: 10.1002/mas.21551

Mass Spectral Reference Libraries: An Ever-Expanding Resource for Chemical Identification
journal, July 2012

Stein, Stephen
Analytical Chemistry, Vol. 84, Issue 17
DOI: 10.1021/ac301205z

Anisotropic material properties of fused deposition modeling ABS
journal, October 2002

Ahn, Sung‐Hoon; Montero, Michael; Odell, Dan
Rapid Prototyping Journal, Vol. 8, Issue 4
DOI: 10.1108/13552540210441166

The effect of solvent polarity on the accumulation of leachables from pharmaceutical product containers
journal, February 2006

Jenke, Dennis; Odufu, Alex; Poss, Mitchell
European Journal of Pharmaceutical Sciences, Vol. 27, Issue 2-3
DOI: 10.1016/j.ejps.2005.09.001

Genotoxicity of styrene-acrylonitrile trimer in brain, liver, and blood cells of weanling F344 rats
journal, February 2012

Hobbs, Cheryl A.; Chhabra, Rajendra S.; Recio, Leslie
Environmental and Molecular Mutagenesis, Vol. 53, Issue 3
DOI: 10.1002/em.21680

Screening-Level Risk Assessment for Styrene-Acrylonitrile (SAN) Trimer Detected in Soil and Groundwater
journal, October 2012

Kirman, C. R.; Gargas, M. L.; Collins, J. J.
Journal of Toxicology and Environmental Health, Part A, Vol. 75, Issue 21
DOI: 10.1080/15287394.2012.709441

Comprehensive analysis of the toxic and refractory pollutants in acrylonitrile–butadiene–styrene resin manufacturing wastewater by gas chromatography spectrometry with a mass or flame ionization detector
journal, June 2012

Lai, Bo; Zhou, Yuexi; Yang, Ping
Journal of Chromatography A, Vol. 1244
DOI: 10.1016/j.chroma.2012.04.058

Acrylonitrile-butadiene-styrene copolymers (ABS): Pyrolysis and combustion products and their toxicity?a review of the literature
journal, September 1986

Rutkowski, Joseph V.; Levin, Barbara C.
Fire and Materials, Vol. 10, Issue 3-4
DOI: 10.1002/fam.810100303

The dimerization of styrene
journal, February 1968

Mayo, Frank R.
Journal of the American Chemical Society, Vol. 90, Issue 5
DOI: 10.1021/ja01007a032

Indirect Food Additive Migration from Polymeric Food Packaging Materials
journal, January 1987

Till, Derek; Schwope, Arthur D.; Ehntholt, Daniel J.
CRC Critical Reviews in Toxicology, Vol. 18, Issue 3
DOI: 10.3109/10408448709089862

Migration of additives in polymers: Migration of Additives in Polymers
journal, September 1997

Földes, Enikö; Szigeti-Erdei, Andrea
Journal of Vinyl and Additive Technology, Vol. 3, Issue 3
DOI: 10.1002/vnl.10195

An overview of chemical additives present in plastics: Migration, release, fate and environmental impact during their use, disposal and recycling
journal, February 2018

Hahladakis, John N.; Velis, Costas A.; Weber, Roland
Journal of Hazardous Materials, Vol. 344
DOI: 10.1016/j.jhazmat.2017.10.014

Similar Records in DOE PAGES and OSTI.GOV collections:

Fracture behavior of additively manufactured acrylonitrile butadiene styrene (ABS) materials

Journal Article Hart, Kevin R. ; Wetzel, Eric D. - Engineering Fracture Mechanics
Cited by 87
https://doi.org/10.1016/j.engfracmech.2017.03.028
RECYCLING CARBON FIBER FILLED ACRYLONITRILE-BUTADIENE-STYRENE FOR LARGE FORMAT ADDITIVE MANUFACTURING

Conference Walker, Roo ; Smith, Tyler ; Lindahl, John ; ...
Full Text Available
Microstructural design and additive manufacturing and characterization of 3D orthogonal short carbon fiber/acrylonitrile-butadiene-styrene preform and composite

Journal Article Quan, Zhenzhen ; Larimore, Zachary ; Wu, Amanda ; ... - Composites Science and Technology

In contrast to conventional preforming techniques, additive manufacturing features direct and layer-by-layer fabrication, which provides viable new capabilities for the fabrication of reinforced composites. In this paper, we explore the microstructural design as well as additive manufacturing and characterization of 3D orthogonal, short carbon fiber/acrylonitrile-butadiene-styrene (ABS) preforms and composite. First, an array of 3D orthogonal preforms is designed based on topological consideration and validated by fused filament fabrication of pure ABS wire; high fidelity between models and preforms is accomplished. Then, short carbon fibers are introduced into the designed 3D orthogonal preforms as reinforcement, using a short carbon fiber/ABS wire.more »« less
Cited by 81
https://doi.org/10.1016/j.compscitech.2016.02.021

Full Text Available
Toxicity of the components of styrene polymers: Polystyrene, acrylonitrile-butadiene-styrene (ABS) and styrene-butadiene-rubber (SBR). Reactants and additives

Journal Article Fishbein, L - Prog. Clin. Biol. Res.; (United States)

The toxicity of the components of styrene polymers, e.g., polystyrene, ABS and SBR, were reviewed with primary focus on the reactive monomers (except styrene) (e.g., acrylonitrile, butadiene) as well as on impurities and solvents such as benzene, hexane and methylethyl ketone, and additives such as phenyl-2-naphthylamine, di-n-butyl phthalate, and a number of peroxide initiators and flame retardants (e.g., 2,3-dibromopropanol, decadibromodiphenyl oxide and antimony trioxide). It is stressed that toxicity data are generally lacking for the majority of additives employed in the production of styrene polymers. Information is also lacking as to the numbers of individuals at potential risk and themore »« less
GRAFT POLYMERIZATION OF STYRENE MONOMER AND MIXED MONOMER OF STYRENE AND ACRYLONITRILE ON TO ACRYLONITRILE-BUTADIENE COPOLYMER (in Japanese)

Journal Article Takahashi, A ; Kobayashi, S - Proc. Japan Conf. Radioisotopes

Graft polymerization of styrene monomer and a mixed monomer of styrene and acrylonitrile onto an actylonitrilebuthdiene copolymer was conducted by both radiation and a chemical catalyst method. In the experiments, the radiation method used a direct process by which gamma radation was applied to a uniform solution, and the catalyst method adopted a solution polymerization process that involved as much the same conditions as possible of the radiation method. Where styrene monomer alone was used, the radiation method proved better than the catalyst method from the results of both tensile and impact tests. Moreover, the former process produced less gel.more »« less

Similar Records

Title: Screening for extractables in additive-manufactured acrylonitrile butadiene styrene orthopedic cast

Citation Formats

A global sustainability perspective on 3D printing technologies journal, November 2014

Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditions journal, June 2014

Integration of 3D printing and additive manufacturing in the interventional pulmonologist's toolbox journal, January 2018

The potential of 3D printing in urological research and patient care journal, February 2018

Printing and Prototyping of Tissues and Scaffolds journal, November 2012

A 3D bioprinting system to produce human-scale tissue constructs with structural integrity journal, February 2016

Additive manufacturing of tissues and organs journal, August 2012

Controlling release from 3D printed medical devices using CLIP and drug-loaded liquid resins journal, May 2018

The Emerging Role of 3D Printing in Arthroplasty and Orthopedics journal, August 2018

A personalized 3D-printed prosthetic joint replacement for the human temporomandibular joint: From implant design to implantation journal, May 2017

The future of dental devices is digital journal, January 2012

Standardization in additive manufacturing: activities carried out by international organizations and projects journal, September 2014

Fabrication of low cost soft tissue prostheses with the desktop 3D printer journal, November 2014

Regulatory Considerations in the Design and Manufacturing of Implantable 3D-Printed Medical Devices: Regulatory Considerations of 3D-Printed Implants journal, August 2015

Assessing and Reducing the Toxicity of 3D-Printed Parts journal, November 2015

Additively manufactured medical products – the FDA perspective journal, December 2016

Emissions of Ultrafine Particles and Volatile Organic Compounds from Commercially Available Desktop Three-Dimensional Printers with Multiple Filaments journal, January 2016

Emissions of Nanoparticles and Gaseous Material from 3D Printer Operation journal, October 2015

Inhalation exposure to three-dimensional printer emissions stimulates acute hypertension and microvascular dysfunction journal, November 2017

Characterization and Control of Nanoparticle Emission during 3D Printing journal, August 2017

Characterization of chemical contaminants generated by a desktop fused deposition modeling 3-dimensional Printer journal, June 2017

Detection and Identification of Leachables in Vaccine from Plastic Packaging Materials Using UPLC-QTOF MS with Self-Built Polymer Additives Library journal, June 2016

Qualitative assessment of extractables from single-use components and the impact of reference standard selection journal, February 2018

Large-Scale Assessment of Extractables and Leachables in Single-Use Bags for Biomanufacturing journal, June 2018

Identifying Small Molecules via High Resolution Mass Spectrometry: Communicating Confidence journal, February 2014

A tutorial in small molecule identification via electrospray ionization-mass spectrometry: The practical art of structural elucidation journal, November 2017

Mass Spectral Reference Libraries: An Ever-Expanding Resource for Chemical Identification journal, July 2012

Anisotropic material properties of fused deposition modeling ABS journal, October 2002

The effect of solvent polarity on the accumulation of leachables from pharmaceutical product containers journal, February 2006

Genotoxicity of styrene-acrylonitrile trimer in brain, liver, and blood cells of weanling F344 rats journal, February 2012

Screening-Level Risk Assessment for Styrene-Acrylonitrile (SAN) Trimer Detected in Soil and Groundwater journal, October 2012

Comprehensive analysis of the toxic and refractory pollutants in acrylonitrile–butadiene–styrene resin manufacturing wastewater by gas chromatography spectrometry with a mass or flame ionization detector journal, June 2012

Acrylonitrile-butadiene-styrene copolymers (ABS): Pyrolysis and combustion products and their toxicity?a review of the literature journal, September 1986

The dimerization of styrene journal, February 1968

Indirect Food Additive Migration from Polymeric Food Packaging Materials journal, January 1987

Migration of additives in polymers: Migration of Additives in Polymers journal, September 1997

An overview of chemical additives present in plastics: Migration, release, fate and environmental impact during their use, disposal and recycling journal, February 2018

A global sustainability perspective on 3D printing technologies
journal, November 2014

Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditions
journal, June 2014

Integration of 3D printing and additive manufacturing in the interventional pulmonologist's toolbox
journal, January 2018

The potential of 3D printing in urological research and patient care
journal, February 2018

Printing and Prototyping of Tissues and Scaffolds
journal, November 2012

A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
journal, February 2016

Additive manufacturing of tissues and organs
journal, August 2012

Controlling release from 3D printed medical devices using CLIP and drug-loaded liquid resins
journal, May 2018

The Emerging Role of 3D Printing in Arthroplasty and Orthopedics
journal, August 2018

A personalized 3D-printed prosthetic joint replacement for the human temporomandibular joint: From implant design to implantation
journal, May 2017

The future of dental devices is digital
journal, January 2012

Standardization in additive manufacturing: activities carried out by international organizations and projects
journal, September 2014

Fabrication of low cost soft tissue prostheses with the desktop 3D printer
journal, November 2014

Regulatory Considerations in the Design and Manufacturing of Implantable 3D-Printed Medical Devices: Regulatory Considerations of 3D-Printed Implants
journal, August 2015

Assessing and Reducing the Toxicity of 3D-Printed Parts
journal, November 2015

Additively manufactured medical products – the FDA perspective
journal, December 2016

Emissions of Ultrafine Particles and Volatile Organic Compounds from Commercially Available Desktop Three-Dimensional Printers with Multiple Filaments
journal, January 2016

Emissions of Nanoparticles and Gaseous Material from 3D Printer Operation
journal, October 2015

Inhalation exposure to three-dimensional printer emissions stimulates acute hypertension and microvascular dysfunction
journal, November 2017

Characterization and Control of Nanoparticle Emission during 3D Printing
journal, August 2017

Characterization of chemical contaminants generated by a desktop fused deposition modeling 3-dimensional Printer
journal, June 2017

Detection and Identification of Leachables in Vaccine from Plastic Packaging Materials Using UPLC-QTOF MS with Self-Built Polymer Additives Library
journal, June 2016

Qualitative assessment of extractables from single-use components and the impact of reference standard selection
journal, February 2018

Large-Scale Assessment of Extractables and Leachables in Single-Use Bags for Biomanufacturing
journal, June 2018

Identifying Small Molecules via High Resolution Mass Spectrometry: Communicating Confidence
journal, February 2014

A tutorial in small molecule identification via electrospray ionization-mass spectrometry: The practical art of structural elucidation
journal, November 2017

Mass Spectral Reference Libraries: An Ever-Expanding Resource for Chemical Identification
journal, July 2012

Anisotropic material properties of fused deposition modeling ABS
journal, October 2002

The effect of solvent polarity on the accumulation of leachables from pharmaceutical product containers
journal, February 2006

Genotoxicity of styrene-acrylonitrile trimer in brain, liver, and blood cells of weanling F344 rats
journal, February 2012

Screening-Level Risk Assessment for Styrene-Acrylonitrile (SAN) Trimer Detected in Soil and Groundwater
journal, October 2012

Comprehensive analysis of the toxic and refractory pollutants in acrylonitrile–butadiene–styrene resin manufacturing wastewater by gas chromatography spectrometry with a mass or flame ionization detector
journal, June 2012

Acrylonitrile-butadiene-styrene copolymers (ABS): Pyrolysis and combustion products and their toxicity?a review of the literature
journal, September 1986

The dimerization of styrene
journal, February 1968

Indirect Food Additive Migration from Polymeric Food Packaging Materials
journal, January 1987

Migration of additives in polymers: Migration of Additives in Polymers
journal, September 1997

An overview of chemical additives present in plastics: Migration, release, fate and environmental impact during their use, disposal and recycling
journal, February 2018