Recycled Cellulose Polypropylene Composite Feedstocks for Material Extrusion Additive Manufacturing

Zander, Nicole E.; Park, Jay H.; Boelter, Zachary R.; Gillan, Margaret A.

doi:10.1021/acsomega.9b01564

Title: Recycled Cellulose Polypropylene Composite Feedstocks for Material Extrusion Additive Manufacturing

Authors:

^[1]; Park, Jay H. ^[2]; Boelter, Zachary R. ^[1]; Gillan, Margaret A. ^[3]

U.S. Army Research Laboratory, Weapons and Materials Research Directorate, Aberdeen Proving Ground, Aberdeen, Maryland 21005, United States
Francis College of Engineering, University of Massachusetts Lowell, Lowell, Massachusetts 01854, United States
Henry M. Rowan College of Engineering, Rowan University, Glassboro, New Jersey 08028, United States

Publication Date:: Thu Aug 15 00:00:00 EDT 2019

Sponsoring Org.:: USDOE

OSTI Identifier:: 1557384

Grant/Contract Number:: ORISE 1120-1120-99

Resource Type:: Published Article

Journal Name:: ACS Omega

Additional Journal Information:: Journal Name: ACS Omega Journal Volume: 4 Journal Issue: 9; Journal ID: ISSN 2470-1343

Publisher:: American Chemical Society

Country of Publication:: United States

Language:: English

Citation Formats


                    Zander, Nicole E., Park, Jay H., Boelter, Zachary R., and Gillan, Margaret A. Recycled Cellulose Polypropylene Composite Feedstocks for Material Extrusion Additive Manufacturing.  United States: N. p., 2019. 
Web.  doi:10.1021/acsomega.9b01564.

Copy to clipboard


                    Zander, Nicole E., Park, Jay H., Boelter, Zachary R., & Gillan, Margaret A. Recycled Cellulose Polypropylene Composite Feedstocks for Material Extrusion Additive Manufacturing.  United States.  https://doi.org/10.1021/acsomega.9b01564

Copy to clipboard


                    Zander, Nicole E., Park, Jay H., Boelter, Zachary R., and Gillan, Margaret A. Thu .  
"Recycled Cellulose Polypropylene Composite Feedstocks for Material Extrusion Additive Manufacturing".  United States.  https://doi.org/10.1021/acsomega.9b01564.

Copy to clipboard


                    
@article{osti_1557384,

  title        = {Recycled Cellulose Polypropylene Composite Feedstocks for Material Extrusion Additive Manufacturing},

  author       = {Zander, Nicole E. and Park, Jay H. and Boelter, Zachary R. and Gillan, Margaret A.},

  abstractNote = {},

  doi          = {10.1021/acsomega.9b01564},

  journal      = {ACS Omega},

  number       = 9,

  volume       = 4,

  place        = {United States},

  year         = {Thu Aug 15 00:00:00 EDT 2019},

  month        = {Thu Aug 15 00:00:00 EDT 2019}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Publisher's Version of Record
https://doi.org/10.1021/acsomega.9b01564

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 38 works

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Works referenced in this record:

High Stiffness Natural Fiber‐Reinforced Hybrid Polypropylene Composites
journal, January 2003

Li, Haijun; Sain, Mohini M.
Polymer-Plastics Technology and Engineering, Vol. 42, Issue 5
DOI: 10.1081/PPT-120024999

Distributed recycling of waste polymer into RepRap feedstock
journal, March 2013

Baechler, Christian; DeVuono, Matthew; Pearce, Joshua M.
Rapid Prototyping Journal, Vol. 19, Issue 2
DOI: 10.1108/13552541311302978

Role of weak particle-matrix interfacial adhesion in deformation and fracture mechanisms of rigid particulate-filled poly(methyl methacrylate)
journal, January 2017

Bain, Erich D.; Mrozek, Randy A.; Lenhart, Joseph L.
Mechanics of Materials, Vol. 104
DOI: 10.1016/j.mechmat.2016.09.014

Thermal and Mechanical Properties of Wood Flour/Talc-filled Polylactic Acid Composites: Effect of Filler Content and Coupling Treatment
journal, May 2008

Lee, Sun-Young; Kang, In-Aeh; Doh, Geum-Hyun
Journal of Thermoplastic Composite Materials, Vol. 21, Issue 3
DOI: 10.1177/0892705708089473

3D printing of wood fibre biocomposites: From mechanical to actuation functionality
journal, April 2016

Le Duigou, A.; Castro, M.; Bevan, R.
Materials & Design, Vol. 96
DOI: 10.1016/j.matdes.2016.02.018

Structural characteristics of fused deposition modeling polycarbonate material
journal, December 2013

Smith, Walter Castro; Dean, Richard W.
Polymer Testing, Vol. 32, Issue 8
DOI: 10.1016/j.polymertesting.2013.07.014

Solid-state shear pulverization as effective treatment for dispersing lignocellulose nanofibers in polypropylene composites
journal, February 2014

Iwamoto, Shinichiro; Yamamoto, Shigehiro; Lee, Seung-Hwan
Cellulose, Vol. 21, Issue 3
DOI: 10.1007/s10570-014-0195-5

Study of Thermal Analysis of Selected Cellulose Fibres
journal, December 2016

Števulova, Nadežda; Hospodárova, Viola; Eštoková, Adriana
GeoScience Engineering, Vol. 62, Issue 3
DOI: 10.1515/gse-2016-0020

Thermal Expansion of High Filler Content Cellulose-Plastic Composites
journal, November 2010

Ito, Hirokazu; Hattori, Hidehiro; Okamoto, Tadashi
Journal of Wood Chemistry and Technology, Vol. 30, Issue 4
DOI: 10.1080/02773810903537119

Impact of the nature and shape of cellulosic nanoparticles on the isothermal crystallization kinetics of poly(ε-caprolactone)
journal, December 2011

Siqueira, Gilberto; Fraschini, Carole; Bras, Julien
European Polymer Journal, Vol. 47, Issue 12
DOI: 10.1016/j.eurpolymj.2011.09.014

Influence of coupling agents and treatments on the mechanical properties of cellulose fiber–polystyrene composites
journal, January 1989

Maldas, D.; Kokta, B. V.; Daneault, C.
Journal of Applied Polymer Science, Vol. 37, Issue 3
DOI: 10.1002/app.1989.070370313

Rethinking Timber: Investigation into the Use of Waste Macadamia Nut Shells for Additive Manufacturing
journal, December 2016

Girdis, Jordan; Gaudion, Lauren; Proust, Gwénaëlle
JOM, Vol. 69, Issue 3
DOI: 10.1007/s11837-016-2213-6

Effect of Extrusion on the Mechanical and Rheological Properties of a Reinforced Poly(Lactic Acid): Reprocessing and Recycling of Biobased Materials
journal, October 2015

Peinado, Víctor; Castell, Pere; García, Lidia
Materials, Vol. 8, Issue 10
DOI: 10.3390/ma8105360

Achievement of quasi-nanostructured polymer blends by solid-state shear pulverization and compatibilization by gradient copolymer addition
journal, September 2006

Tao, Ying; Kim, Jungki; Torkelson, John M.
Polymer, Vol. 47, Issue 19
DOI: 10.1016/j.polymer.2006.07.041

Comparison of polyolefin biocomposites prepared with waste cardboard, microcrystalline cellulose, and cellulose nanocrystals via solid-state shear pulverization
journal, September 2015

Iyer, Krishnan A.; Flores, Amanda M.; Torkelson, John M.
Polymer, Vol. 75
DOI: 10.1016/j.polymer.2015.08.029

Polymer recycling in an open-source additive manufacturing context: Mechanical issues
journal, October 2017

Cruz Sanchez, Fabio A.; Boudaoud, Hakim; Hoppe, Sandrine
Additive Manufacturing, Vol. 17
DOI: 10.1016/j.addma.2017.05.013

Recycled polypropylene blends as novel 3D printing materials
journal, January 2019

Zander, Nicole E.; Gillan, Margaret; Burckhard, Zachary
Additive Manufacturing, Vol. 25
DOI: 10.1016/j.addma.2018.11.009

Degradation of ABS during repeated processing and accelerated ageing
journal, January 2003

Boldizar, Antal; Möller, Kenneth
Polymer Degradation and Stability, Vol. 81, Issue 2
DOI: 10.1016/S0141-3910(03)00107-1

Extrusion and mechanical properties of highly filled cellulose fibre–polypropylene composites
journal, August 2007

Bengtsson, Magnus; Baillif, Marie Le; Oksman, Kristiina
Composites Part A: Applied Science and Manufacturing, Vol. 38, Issue 8
DOI: 10.1016/j.compositesa.2007.03.004

Recycling meal-ready-to-eat (MRE) pouches into polymer filament for material extrusion additive manufacturing
journal, May 2018

Hart, Kevin R.; Frketic, Jolie B.; Brown, John R.
Additive Manufacturing, Vol. 21
DOI: 10.1016/j.addma.2018.04.011

Green polypropylene/waste paper composites with superior modulus and crystallization behavior: Optimizing specific energy in solid-state shear pulverization for filler size reduction and dispersion
journal, April 2016

Iyer, Krishnan A.; Lechanski, John; Torkelson, John M.
Composites Part A: Applied Science and Manufacturing, Vol. 83
DOI: 10.1016/j.compositesa.2015.09.011

Polypropylene/Cellulose Composites for Material Extrusion Additive Manufacturing
journal, April 2018

Kaynak, Baris; Spoerk, Martin; Shirole, Anuja
Macromolecular Materials and Engineering, Vol. 303, Issue 5
DOI: 10.1002/mame.201800037

Spray-Dried Cellulose Nanofibril-Reinforced Polypropylene Composites for Extrusion-Based Additive Manufacturing: Nonisothermal Crystallization Kinetics and Thermal Expansion
journal, February 2018

Wang, Lu; Gramlich, William; Gardner, Douglas
Journal of Composites Science, Vol. 2, Issue 1
DOI: 10.3390/jcs2010007

Interface Modification and Mechanical Properties of Natural Fiber-Polyolefin Composite Products
journal, January 2005

Sain, M.; Suhara, P.; Law, S.
Journal of Reinforced Plastics and Composites, Vol. 24, Issue 2
DOI: 10.1177/0731684405041717

Processing of homogeneous ceramic/polymer blends for bioresorbable composites
journal, September 2006

Mathieu, L.; Bourban, P.; Manson, J.
Composites Science and Technology, Vol. 66, Issue 11-12
DOI: 10.1016/j.compscitech.2005.11.012

Effects of fibre treatment on wettability and mechanical behaviour of flax/polypropylene composites
journal, July 2003

Cantero, Guillermo; Arbelaiz, Aitor; Llano-Ponte, Rodrigo
Composites Science and Technology, Vol. 63, Issue 9
DOI: 10.1016/S0266-3538(03)00094-0

Effects of Several Ingredient Variables on Mechanical Properties of Wood Fiber-Polyolefin Composites Blended in a Thermokinetic Mixer
journal, January 1992

Gonzalez, C.; Clemons, C. M.; Myers, G. E.
MRS Proceedings, Vol. 266
DOI: 10.1557/PROC-266-127

The nature of adhesion in composites of modified cellulose fibers and polypropylene
journal, February 1991

Felix, Johan M.; Gatenholm, Paul
Journal of Applied Polymer Science, Vol. 42, Issue 3
DOI: 10.1002/app.1991.070420307

Effects of electron beam radiation dose on the compatibilization behaviour in recycled polypropylene/microcrystalline cellulose composites
journal, January 2018

Samat, N.; Motsidi, S. N. R.; Lazim, N. H. M.
IOP Conference Series: Materials Science and Engineering, Vol. 290
DOI: 10.1088/1757-899X/290/1/012034

Effects of cellulose fibers in polypropylene composites
journal, April 1989

Bataille, P.; Ricard, L.; Sapieha, S.
Polymer Composites, Vol. 10, Issue 2
DOI: 10.1002/pc.750100207

Comparison in glass transition and enthalpy relaxation between native and gelatinized rice starches
journal, May 2002

Chung, H.
Carbohydrate Polymers, Vol. 48, Issue 3
DOI: 10.1016/S0144-8617(01)00259-4

The Effect of Poly[methylene(polyphenyl isocyanate)] and Maleated Polypropylene Coupling Agents on New Zealand Radiata Pine Fiber–Polypropylene Composites
journal, December 2004

Pickering, K. L.; Ji, C.
Journal of Reinforced Plastics and Composites, Vol. 23, Issue 18
DOI: 10.1177/0731684404041139

Preparation and characterization of multiwalled carbon nanotube dispersions in polypropylene: Melt mixing versus solid-state shear pulverization
journal, July 2009

Pujari, Saswati; Ramanathan, Thillaiyan; Kasimatis, Kosmas
Journal of Polymer Science Part B: Polymer Physics, Vol. 47, Issue 14
DOI: 10.1002/polb.21744

Crystallinity in the polypropylene/cellulose system. I. Nucleation and crystalline morphology
journal, November 1993

Quillin, Daniel T.; Caulfield, Daniel F.; Koutsky, James A.
Journal of Applied Polymer Science, Vol. 50, Issue 7
DOI: 10.1002/app.1993.070500709

Mechanical properties of biodegradable composites from poly lactic acid (PLA) and microcrystalline cellulose (MCC)
journal, January 2005

Mathew, Aji P.; Oksman, Kristiina; Sain, Mohini
Journal of Applied Polymer Science, Vol. 97, Issue 5
DOI: 10.1002/app.21779

Mechanical Properties of Specimens 3D Printed with Virgin and Recycled Polylactic Acid
journal, June 2017

Anderson, Isabelle
3D Printing and Additive Manufacturing, Vol. 4, Issue 2
DOI: 10.1089/3dp.2016.0054

A review of recent developments in natural fibre composites and their mechanical performance
journal, April 2016

Pickering, K. L.; Efendy, M. G. Aruan; Le, T. M.
Composites Part A: Applied Science and Manufacturing, Vol. 83
DOI: 10.1016/j.compositesa.2015.08.038

Effect of Hybrid Mineral and Bamboo Fillers on Thermal Expansion Behavior of Bamboo Fiber and Recycled Polypropylene–Polyethylene Composites
journal, August 2012

Huang, Runzhou; Zhang, Yang; Xu, Xinwu
BioResources, Vol. 7, Issue 4
DOI: 10.15376/biores.7.4.4563-4574

Well-mixed blends of HDPE and ultrahigh molecular weight polyethylene with major improvements in impact strength achieved via solid-state shear pulverization
journal, September 2014

Diop, Mirian F.; Burghardt, Wesley R.; Torkelson, John M.
Polymer, Vol. 55, Issue 19
DOI: 10.1016/j.polymer.2014.07.050

Use of wood fibers in thermoplastics. VII. The effect of coupling agents in polyethylene–wood fiber composites
journal, January 1989

Raj, R. G.; Kokta, B. V.; Maldas, D.
Journal of Applied Polymer Science, Vol. 37, Issue 4
DOI: 10.1002/app.1989.070370420

Recycled polyethylene terephthalate as a new FFF feedstock material
journal, May 2018

Zander, Nicole E.; Gillan, Margaret; Lambeth, Robert H.
Additive Manufacturing, Vol. 21
DOI: 10.1016/j.addma.2018.03.007

Thermal Degradation of Natural Fiber-reinforced Polypropylene Composites
journal, September 2009

Tajvidi, Mehdi; Takemura, Akio
Journal of Thermoplastic Composite Materials, Vol. 23, Issue 3
DOI: 10.1177/0892705709347063

Effect of Reinforcement of Hydrophobic Grade Banana ( Musa ornata ) Bark Fiber on the Physicomechanical Properties of Isotactic Polypropylene
journal, January 2016

Mamunur Rashid, Md.; Samad, Sabrin A.; Gafur, M. A.
International Journal of Polymer Science, Vol. 2016
DOI: 10.1155/2016/9017956

Polymer−Graphite Nanocomposites: Effective Dispersion and Major Property Enhancement via Solid-State Shear Pulverization
journal, March 2008

Wakabayashi, Katsuyuki; Pierre, Cynthia; Dikin, Dmitriy A.
Macromolecules, Vol. 41, Issue 6
DOI: 10.1021/ma071687b

Development and Application of Wood Flour-Filled Polylactic Acid Composite Filament for 3D Printing
journal, March 2017

Tao, Yubo; Wang, Honglei; Li, Zelong
Materials, Vol. 10, Issue 4
DOI: 10.3390/ma10040339

Effect of chemical treatment of fibers on the mechanical properties of polyethylene-wood fiber composites
journal, January 1989

Raj, R. G.; Kokta, B. V.; Daneault, C.
Journal of Adhesion Science and Technology, Vol. 3, Issue 1
DOI: 10.1163/156856189X00056

Mechanical properties of wood–fiber reinforced polypropylene composites: Effect of a novel compatibilizer with isocyanate functional group
journal, February 2007

Karmarkar, Ajay; Chauhan, S. S.; Modak, Jayant M.
Composites Part A: Applied Science and Manufacturing, Vol. 38, Issue 2
DOI: 10.1016/j.compositesa.2006.05.005

Similar Records in DOE PAGES and OSTI.GOV collections:

Recycling meal-ready-to-eat (MRE) pouches into polymer filament for material extrusion additive manufacturing

Journal Article Hart, Kevin R. ; Frketic, Jolie B. ; Brown, John R. - Additive Manufacturing
Cited by 34
https://doi.org/10.1016/j.addma.2018.04.011
Morphological characteristics of spray dried cellulose nanofibers produced using various wood pulp feedstocks and their effects on polypropylene composite properties

Journal Article Hwang, Sungjun ; Han, Yousoo ; Gardner, Douglas J. - Composites. Part B, Engineering
https://doi.org/10.1016/j.compositesb.2023.111093
Processing and mechanical characterization of short carbon fiber-reinforced epoxy composites for material extrusion additive manufacturing

Journal Article Hmeidat, Nadim S. ; Elkins, Daniel S. ; Peter, Hutchison R. ; ... - Composites Part B: Engineering

Fiber-reinforced polymer composites have been extensively utilized in recent years as feedstock materials for material extrusion additive manufacturing (AM) processes to improve strength, stiffness, and functionality of printed parts over unfilled printed polymers. However, the widespread adoption of AM of fiber-reinforced polymer composites requires a deeper understanding of the process-structure-property relationships in printed components, and such relationships are not well understood yet. Fiber length is critically important to the mechanical performance of short fiber composites, but very few studies to-date have focused on how the fiber length distribution (FLD) evolves during processing of composite feedstocks and how this evolution affectsmore »« less
https://doi.org/10.1016/j.compositesb.2021.109122

Full Text Available
Development of the Multi-Material Inspection for Closed-Loop Rapid Optimization (MICRO) Sensor for Extrusion-Based Additive Manufacturing of Metal-Polymer Composite Inks

Journal Article Wang, Jenny ; Chang, Allan S. P. ; Hunter, Steven L. ; ... - IEEE Sensors Journal

Additive Manufacturing (AM), or 3D printing, is a powerful technology that is revolutionizing the way designers create products across many industries. AM technology is severely limited by the lack of effective methods for in situ characterization of multi-material properties and composition during printing. The ability to detect the composition of multi-material printed inks in real time is an emerging need for a wide range of manufacturing applications. In this study, dielectric properties of embedded metal microparticles in a dielectric matrix are measured and characterized as a function of particle size, shape, volume percentage and frequency. Unexpectedly, there was no observationmore »« less
https://doi.org/10.1109/JSEN.2020.3014790
Material Extrusion Additive Manufacturing of Wood and Lignocellulosic Filled Composites

Journal Article Lamm, Meghan E. ; Wang, Lu ; Kishore, Vidya ; ... - Polymers

Wood and lignocellulosic-based material components are explored in this review as functional additives and reinforcements in composites for extrusion-based additive manufacturing (AM) or 3D printing. The motivation for using these sustainable alternatives in 3D printing includes enhancing material properties of the resulting printed parts, while providing a green alternative to carbon or glass filled polymer matrices, all at reduced material costs. Previous review articles on this topic have focused only on introducing the use of natural fillers with material extrusion AM and discussion of their subsequent material properties. This review not only discusses the present state of materials extrusion AMmore »« less
https://doi.org/10.3390/polym12092115

Similar Records

Title: Recycled Cellulose Polypropylene Composite Feedstocks for Material Extrusion Additive Manufacturing

Citation Formats

High Stiffness Natural Fiber‐Reinforced Hybrid Polypropylene Composites journal, January 2003

Distributed recycling of waste polymer into RepRap feedstock journal, March 2013

Role of weak particle-matrix interfacial adhesion in deformation and fracture mechanisms of rigid particulate-filled poly(methyl methacrylate) journal, January 2017

Thermal and Mechanical Properties of Wood Flour/Talc-filled Polylactic Acid Composites: Effect of Filler Content and Coupling Treatment journal, May 2008

3D printing of wood fibre biocomposites: From mechanical to actuation functionality journal, April 2016

Structural characteristics of fused deposition modeling polycarbonate material journal, December 2013

Solid-state shear pulverization as effective treatment for dispersing lignocellulose nanofibers in polypropylene composites journal, February 2014

Study of Thermal Analysis of Selected Cellulose Fibres journal, December 2016

Thermal Expansion of High Filler Content Cellulose-Plastic Composites journal, November 2010

Impact of the nature and shape of cellulosic nanoparticles on the isothermal crystallization kinetics of poly(ε-caprolactone) journal, December 2011

Influence of coupling agents and treatments on the mechanical properties of cellulose fiber–polystyrene composites journal, January 1989

Rethinking Timber: Investigation into the Use of Waste Macadamia Nut Shells for Additive Manufacturing journal, December 2016

Effect of Extrusion on the Mechanical and Rheological Properties of a Reinforced Poly(Lactic Acid): Reprocessing and Recycling of Biobased Materials journal, October 2015

Achievement of quasi-nanostructured polymer blends by solid-state shear pulverization and compatibilization by gradient copolymer addition journal, September 2006

Comparison of polyolefin biocomposites prepared with waste cardboard, microcrystalline cellulose, and cellulose nanocrystals via solid-state shear pulverization journal, September 2015

Polymer recycling in an open-source additive manufacturing context: Mechanical issues journal, October 2017

Recycled polypropylene blends as novel 3D printing materials journal, January 2019

Degradation of ABS during repeated processing and accelerated ageing journal, January 2003

Extrusion and mechanical properties of highly filled cellulose fibre–polypropylene composites journal, August 2007

Recycling meal-ready-to-eat (MRE) pouches into polymer filament for material extrusion additive manufacturing journal, May 2018

Green polypropylene/waste paper composites with superior modulus and crystallization behavior: Optimizing specific energy in solid-state shear pulverization for filler size reduction and dispersion journal, April 2016

Polypropylene/Cellulose Composites for Material Extrusion Additive Manufacturing journal, April 2018

Spray-Dried Cellulose Nanofibril-Reinforced Polypropylene Composites for Extrusion-Based Additive Manufacturing: Nonisothermal Crystallization Kinetics and Thermal Expansion journal, February 2018

Interface Modification and Mechanical Properties of Natural Fiber-Polyolefin Composite Products journal, January 2005

Processing of homogeneous ceramic/polymer blends for bioresorbable composites journal, September 2006

Effects of fibre treatment on wettability and mechanical behaviour of flax/polypropylene composites journal, July 2003

Effects of Several Ingredient Variables on Mechanical Properties of Wood Fiber-Polyolefin Composites Blended in a Thermokinetic Mixer journal, January 1992

The nature of adhesion in composites of modified cellulose fibers and polypropylene journal, February 1991

Effects of electron beam radiation dose on the compatibilization behaviour in recycled polypropylene/microcrystalline cellulose composites journal, January 2018

Effects of cellulose fibers in polypropylene composites journal, April 1989

Comparison in glass transition and enthalpy relaxation between native and gelatinized rice starches journal, May 2002

The Effect of Poly[methylene(polyphenyl isocyanate)] and Maleated Polypropylene Coupling Agents on New Zealand Radiata Pine Fiber–Polypropylene Composites journal, December 2004

Preparation and characterization of multiwalled carbon nanotube dispersions in polypropylene: Melt mixing versus solid-state shear pulverization journal, July 2009

Crystallinity in the polypropylene/cellulose system. I. Nucleation and crystalline morphology journal, November 1993

Mechanical properties of biodegradable composites from poly lactic acid (PLA) and microcrystalline cellulose (MCC) journal, January 2005

Mechanical Properties of Specimens 3D Printed with Virgin and Recycled Polylactic Acid journal, June 2017

A review of recent developments in natural fibre composites and their mechanical performance journal, April 2016

Effect of Hybrid Mineral and Bamboo Fillers on Thermal Expansion Behavior of Bamboo Fiber and Recycled Polypropylene–Polyethylene Composites journal, August 2012

Well-mixed blends of HDPE and ultrahigh molecular weight polyethylene with major improvements in impact strength achieved via solid-state shear pulverization journal, September 2014

Use of wood fibers in thermoplastics. VII. The effect of coupling agents in polyethylene–wood fiber composites journal, January 1989

Recycled polyethylene terephthalate as a new FFF feedstock material journal, May 2018

Thermal Degradation of Natural Fiber-reinforced Polypropylene Composites journal, September 2009

Effect of Reinforcement of Hydrophobic Grade Banana ( Musa ornata ) Bark Fiber on the Physicomechanical Properties of Isotactic Polypropylene journal, January 2016

Polymer−Graphite Nanocomposites: Effective Dispersion and Major Property Enhancement via Solid-State Shear Pulverization journal, March 2008

Development and Application of Wood Flour-Filled Polylactic Acid Composite Filament for 3D Printing journal, March 2017

Effect of chemical treatment of fibers on the mechanical properties of polyethylene-wood fiber composites journal, January 1989

Mechanical properties of wood–fiber reinforced polypropylene composites: Effect of a novel compatibilizer with isocyanate functional group journal, February 2007

High Stiffness Natural Fiber‐Reinforced Hybrid Polypropylene Composites
journal, January 2003

Distributed recycling of waste polymer into RepRap feedstock
journal, March 2013

Role of weak particle-matrix interfacial adhesion in deformation and fracture mechanisms of rigid particulate-filled poly(methyl methacrylate)
journal, January 2017

Thermal and Mechanical Properties of Wood Flour/Talc-filled Polylactic Acid Composites: Effect of Filler Content and Coupling Treatment
journal, May 2008

3D printing of wood fibre biocomposites: From mechanical to actuation functionality
journal, April 2016

Structural characteristics of fused deposition modeling polycarbonate material
journal, December 2013

Solid-state shear pulverization as effective treatment for dispersing lignocellulose nanofibers in polypropylene composites
journal, February 2014

Study of Thermal Analysis of Selected Cellulose Fibres
journal, December 2016

Thermal Expansion of High Filler Content Cellulose-Plastic Composites
journal, November 2010

Impact of the nature and shape of cellulosic nanoparticles on the isothermal crystallization kinetics of poly(ε-caprolactone)
journal, December 2011

Influence of coupling agents and treatments on the mechanical properties of cellulose fiber–polystyrene composites
journal, January 1989

Rethinking Timber: Investigation into the Use of Waste Macadamia Nut Shells for Additive Manufacturing
journal, December 2016

Effect of Extrusion on the Mechanical and Rheological Properties of a Reinforced Poly(Lactic Acid): Reprocessing and Recycling of Biobased Materials
journal, October 2015

Achievement of quasi-nanostructured polymer blends by solid-state shear pulverization and compatibilization by gradient copolymer addition
journal, September 2006

Comparison of polyolefin biocomposites prepared with waste cardboard, microcrystalline cellulose, and cellulose nanocrystals via solid-state shear pulverization
journal, September 2015

Polymer recycling in an open-source additive manufacturing context: Mechanical issues
journal, October 2017

Recycled polypropylene blends as novel 3D printing materials
journal, January 2019

Degradation of ABS during repeated processing and accelerated ageing
journal, January 2003

Extrusion and mechanical properties of highly filled cellulose fibre–polypropylene composites
journal, August 2007

Recycling meal-ready-to-eat (MRE) pouches into polymer filament for material extrusion additive manufacturing
journal, May 2018

Green polypropylene/waste paper composites with superior modulus and crystallization behavior: Optimizing specific energy in solid-state shear pulverization for filler size reduction and dispersion
journal, April 2016

Polypropylene/Cellulose Composites for Material Extrusion Additive Manufacturing
journal, April 2018

Spray-Dried Cellulose Nanofibril-Reinforced Polypropylene Composites for Extrusion-Based Additive Manufacturing: Nonisothermal Crystallization Kinetics and Thermal Expansion
journal, February 2018

Interface Modification and Mechanical Properties of Natural Fiber-Polyolefin Composite Products
journal, January 2005

Processing of homogeneous ceramic/polymer blends for bioresorbable composites
journal, September 2006

Effects of fibre treatment on wettability and mechanical behaviour of flax/polypropylene composites
journal, July 2003

Effects of Several Ingredient Variables on Mechanical Properties of Wood Fiber-Polyolefin Composites Blended in a Thermokinetic Mixer
journal, January 1992

The nature of adhesion in composites of modified cellulose fibers and polypropylene
journal, February 1991

Effects of electron beam radiation dose on the compatibilization behaviour in recycled polypropylene/microcrystalline cellulose composites
journal, January 2018

Effects of cellulose fibers in polypropylene composites
journal, April 1989

Comparison in glass transition and enthalpy relaxation between native and gelatinized rice starches
journal, May 2002

The Effect of Poly[methylene(polyphenyl isocyanate)] and Maleated Polypropylene Coupling Agents on New Zealand Radiata Pine Fiber–Polypropylene Composites
journal, December 2004

Preparation and characterization of multiwalled carbon nanotube dispersions in polypropylene: Melt mixing versus solid-state shear pulverization
journal, July 2009

Crystallinity in the polypropylene/cellulose system. I. Nucleation and crystalline morphology
journal, November 1993

Mechanical properties of biodegradable composites from poly lactic acid (PLA) and microcrystalline cellulose (MCC)
journal, January 2005

Mechanical Properties of Specimens 3D Printed with Virgin and Recycled Polylactic Acid
journal, June 2017

A review of recent developments in natural fibre composites and their mechanical performance
journal, April 2016

Effect of Hybrid Mineral and Bamboo Fillers on Thermal Expansion Behavior of Bamboo Fiber and Recycled Polypropylene–Polyethylene Composites
journal, August 2012

Well-mixed blends of HDPE and ultrahigh molecular weight polyethylene with major improvements in impact strength achieved via solid-state shear pulverization
journal, September 2014

Use of wood fibers in thermoplastics. VII. The effect of coupling agents in polyethylene–wood fiber composites
journal, January 1989

Recycled polyethylene terephthalate as a new FFF feedstock material
journal, May 2018

Thermal Degradation of Natural Fiber-reinforced Polypropylene Composites
journal, September 2009

Effect of Reinforcement of Hydrophobic Grade Banana ( Musa ornata ) Bark Fiber on the Physicomechanical Properties of Isotactic Polypropylene
journal, January 2016

Polymer−Graphite Nanocomposites: Effective Dispersion and Major Property Enhancement via Solid-State Shear Pulverization
journal, March 2008

Development and Application of Wood Flour-Filled Polylactic Acid Composite Filament for 3D Printing
journal, March 2017

Effect of chemical treatment of fibers on the mechanical properties of polyethylene-wood fiber composites
journal, January 1989

Mechanical properties of wood–fiber reinforced polypropylene composites: Effect of a novel compatibilizer with isocyanate functional group
journal, February 2007