Failure of chopped carbon fiber Sheet Molding Compound (SMC) composites under uniaxial tensile loading: Computational prediction and experimental analysis
- Authors:
- Publication Date:
- Sponsoring Org.:
- USDOE
- OSTI Identifier:
- 1547920
- Grant/Contract Number:
- EE0006867
- Resource Type:
- Publisher's Accepted Manuscript
- Journal Name:
- Composites. Part A, Applied Science and Manufacturing
- Additional Journal Information:
- Journal Name: Composites. Part A, Applied Science and Manufacturing Journal Volume: 118 Journal Issue: C; Journal ID: ISSN 1359-835X
- Publisher:
- Elsevier
- Country of Publication:
- United Kingdom
- Language:
- English
Citation Formats
Chen, Zhangxing, Tang, Haibin, Shao, Yimin, Sun, Qingping, Zhou, Guowei, Li, Yang, Xu, Hongyi, Zeng, Danielle, and Su, Xuming. Failure of chopped carbon fiber Sheet Molding Compound (SMC) composites under uniaxial tensile loading: Computational prediction and experimental analysis. United Kingdom: N. p., 2019.
Web. doi:10.1016/j.compositesa.2018.12.021.
Chen, Zhangxing, Tang, Haibin, Shao, Yimin, Sun, Qingping, Zhou, Guowei, Li, Yang, Xu, Hongyi, Zeng, Danielle, & Su, Xuming. Failure of chopped carbon fiber Sheet Molding Compound (SMC) composites under uniaxial tensile loading: Computational prediction and experimental analysis. United Kingdom. https://doi.org/10.1016/j.compositesa.2018.12.021
Chen, Zhangxing, Tang, Haibin, Shao, Yimin, Sun, Qingping, Zhou, Guowei, Li, Yang, Xu, Hongyi, Zeng, Danielle, and Su, Xuming. Fri .
"Failure of chopped carbon fiber Sheet Molding Compound (SMC) composites under uniaxial tensile loading: Computational prediction and experimental analysis". United Kingdom. https://doi.org/10.1016/j.compositesa.2018.12.021.
@article{osti_1547920,
title = {Failure of chopped carbon fiber Sheet Molding Compound (SMC) composites under uniaxial tensile loading: Computational prediction and experimental analysis},
author = {Chen, Zhangxing and Tang, Haibin and Shao, Yimin and Sun, Qingping and Zhou, Guowei and Li, Yang and Xu, Hongyi and Zeng, Danielle and Su, Xuming},
abstractNote = {},
doi = {10.1016/j.compositesa.2018.12.021},
journal = {Composites. Part A, Applied Science and Manufacturing},
number = C,
volume = 118,
place = {United Kingdom},
year = {Fri Mar 01 00:00:00 EST 2019},
month = {Fri Mar 01 00:00:00 EST 2019}
}
Free Publicly Available Full Text
Publisher's Version of Record
https://doi.org/10.1016/j.compositesa.2018.12.021
https://doi.org/10.1016/j.compositesa.2018.12.021
Other availability
Cited by: 28 works
Citation information provided by
Web of Science
Web of Science
Save to My Library
You must Sign In or Create an Account in order to save documents to your library.
Works referenced in this record:
Net shape spray deposition for compression moulding of discontinuous fibre composites for high performance applications
journal, June 2010
- Luchoo, R.; Harper, L. T.; Bond, M. D.
- Plastics, Rubber and Composites, Vol. 39, Issue 3-5
Comparison between voxel and consistent meso-scale models of woven composites
journal, June 2015
- Doitrand, A.; Fagiano, C.; Irisarri, F. -X.
- Composites Part A: Applied Science and Manufacturing, Vol. 73
A model to predict the strength of short fiber composites
journal, August 1999
- Van Hattum, F. W. J.; Bernardo, C. A.
- Polymer Composites, Vol. 20, Issue 4
Characterization of Prepreg-Based Discontinuous Carbon Fiber/Epoxy Systems
journal, May 2008
- Feraboli, Paolo; Peitso, Elof; Deleo, Francesco
- Journal of Reinforced Plastics and Composites, Vol. 28, Issue 10
3D Modelling of random cellulosic fibrous networks based on X-ray tomography and image analysis
journal, October 2005
- Faessel, M.; Delisée, C.; Bos, F.
- Composites Science and Technology, Vol. 65, Issue 13
Multi-inclusion unit cell models for metal matrix composites with randomly oriented discontinuous reinforcements
journal, September 2002
- Böhm, H. J.; Eckschlager, A.; Han, W.
- Computational Materials Science, Vol. 25, Issue 1-2
Determining the representative volume element size for three-dimensional microstructural material characterization. Part 1: Predictive models
journal, May 2015
- Harris, William M.; Chiu, Wilson K. S.
- Journal of Power Sources, Vol. 282
A non-linear damage model for the tensile behavior of an injection molded short E-glass fiber reinforced polyamide-6,6
journal, February 2005
- Zhou, Yuanxin; Mallick, P. K.
- Materials Science and Engineering: A, Vol. 393, Issue 1-2
Elastic/Viscoplastic Constitutive Model for Fiber Reinforced Thermoplastic Composites
journal, March 1991
- Gates, T. S.; Sun, C. T.
- AIAA Journal, Vol. 29, Issue 3
On the asymmetric yield surface of plastically orthotropic materials: A phenomenological study
journal, June 1997
- Liu, C.
- Acta Materialia, Vol. 45, Issue 6
Experimental analysis and theoretical modeling of the mechanical behavior of short glass fiber and short carbon fiber reinforced polycarbonate hybrid composites
journal, December 2014
- Law, T. T.; Phua, Y. J.; Senawi, R.
- Polymer Composites, Vol. 37, Issue 4
Experimental Determination of the In Situ Transverse Lamina Strength in Graphite/Epoxy Laminates
journal, March 1982
- Flaggs, Donald L.; Kural, Murat H.
- Journal of Composite Materials, Vol. 16, Issue 2
Effects of fiber orientation and anisotropy on tensile strength and elastic modulus of short fiber reinforced polymer composites
journal, April 2015
- Mortazavian, Seyyedvahid; Fatemi, Ali
- Composites Part B: Engineering, Vol. 72
Analytical model for prediction of strength and fracture paths characteristic to randomly oriented strand (ROS) composites
journal, July 2016
- Selezneva, Marina; Roy, Steven; Lessard, Larry
- Composites Part B: Engineering, Vol. 96
Failure behavior of an epoxy matrix under different kinds of static loading
journal, August 2001
- Fiedler, B.; Hojo, M.; Ochiai, S.
- Composites Science and Technology, Vol. 61, Issue 11
Stochastic reconstruction and microstructure modeling of SMC chopped fiber composites
journal, September 2018
- Li, Yi; Chen, Zhangxing; Su, Lingxuan
- Composite Structures, Vol. 200
Numerical Simulation of Saturation Behavior of Physical Properties in Composites with Randomly Distributed Second-phase
journal, April 2005
- Tu, Shan-Tung; Cai, Wen-Zhong; Yin, Yong
- Journal of Composite Materials, Vol. 39, Issue 7
Accurate predictions of orientation dependent modulus in short-fiber-reinforced composite with experimental validation
journal, February 2017
- Tseng, Huan-Chang; Chang, Rong-Yeu; Hsu, Chia-Hsiang
- Polymer Composites, Vol. 39, Issue 8
The Use of Tensors to Describe and Predict Fiber Orientation in Short Fiber Composites
journal, November 1987
- Advani, Suresh G.; Tucker, Charles L.
- Journal of Rheology, Vol. 31, Issue 8
A General Theory of Strength for Anisotropic Materials
journal, January 1971
- Tsai, Stephen W.; Wu, Edward M.
- Journal of Composite Materials, Vol. 5, Issue 1
Micromechanical analysis of polymer composites reinforced by unidirectional fibres: Part I – Constitutive modelling
journal, June 2013
- Melro, A. R.; Camanho, P. P.; Andrade Pires, F. M.
- International Journal of Solids and Structures, Vol. 50, Issue 11-12
Elastic properties of reinforced solids: Some theoretical principles
journal, September 1963
- Hill, R.
- Journal of the Mechanics and Physics of Solids, Vol. 11, Issue 5
3D geometric modelling of discontinuous fibre composites using a force-directed algorithm
journal, October 2016
- Harper, Lt; Qian, Cc; Luchoo, R.
- Journal of Composite Materials, Vol. 51, Issue 17
A generalized uncertainty propagation criterion from benchmark studies of microstructured material systems
journal, February 2013
- Greene, M. Steven; Xu, Hongyi; Tang, Shan
- Computer Methods in Applied Mechanics and Engineering, Vol. 254
Modelling Interlaminar and Intralaminar Damage in Filament-Wound Pipes under Quasi-Static Indentation
journal, February 2002
- Zou, Z.; Reid, S. R.; Li, S.
- Journal of Composite Materials, Vol. 36, Issue 4
A Comparative Study of Two RVE Modelling Methods for Chopped Carbon Fiber SMC
conference, April 2017
- Chen, Zhangxing; Li, Yi; Shao, Yimin
- WCX™ 17: SAE World Congress Experience, SAE Technical Paper Series
Multiscale finite element modeling of sheet molding compound (SMC) composite structure based on stochastic mesostructure reconstruction
journal, March 2018
- Chen, Zhangxing; Huang, Tianyu; Shao, Yimin
- Composite Structures, Vol. 188
Modeling and Simulation of Compression Molding Process for Sheet Molding Compound (SMC) of Chopped Carbon Fiber Composites
journal, January 2017
- Li, Yang; Chen, Zhangxing; Xu, Hongyi
- SAE International Journal of Materials and Manufacturing, Vol. 10, Issue 2
Mechanical Characterization of Advanced Random Discontinuous Carbon/Epoxy Composites
journal, January 2016
- Nicoletto, Gianni; Riva, Enrica; Stocchi, Anellino
- Materials Today: Proceedings, Vol. 3, Issue 4
Evolution of Strain Fields During Tensile Tests of Random Discontinuous Carbon/Epoxy Composites
journal, January 2016
- Nicoletto, Gianni; Valenti, Francesco; di Filippo, Antonio
- Materials Today: Proceedings, Vol. 3, Issue 4
Modulus Measurement for Prepreg-based Discontinuous Carbon Fiber/Epoxy Systems
journal, July 2009
- Feraboli, Paolo; Peitso, Elof; Cleveland, Tyler
- Journal of Composite Materials, Vol. 43, Issue 19
Mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites under fatigue loading
journal, January 1997
- Kenane, M.; Benzeggagh, M. L.
- Composites Science and Technology, Vol. 57, Issue 5
Characterization of mechanical properties of randomly oriented strand thermoplastic composites
journal, October 2015
- Selezneva, Marina; Lessard, Larry
- Journal of Composite Materials, Vol. 50, Issue 20
Analysis of 3D random chopped fiber reinforced composites using FEM and random sequential adsorption
journal, September 2008
- Pan, Yi; Iorga, Lucian; Pelegri, Assimina A.
- Computational Materials Science, Vol. 43, Issue 3
Numerical generation of a random chopped fiber composite RVE and its elastic properties
journal, October 2008
- Pan, Yi; Iorga, Lucian; Pelegri, Assimina A.
- Composites Science and Technology, Vol. 68, Issue 13
Notched behavior of prepreg-based discontinuous carbon fiber/epoxy systems
journal, March 2009
- Feraboli, Paolo; Peitso, Elof; Cleveland, Tyler
- Composites Part A: Applied Science and Manufacturing, Vol. 40, Issue 3
Experimental characterization of the tensile failure mode of ultra-thin chopped carbon fiber tape-reinforced thermoplastics
journal, August 2016
- Yamashita, Shinichiro; Hashimoto, Koji; Suganuma, Hirofumi
- Journal of Reinforced Plastics and Composites, Vol. 35, Issue 18
Predicting fatigue damage in interphase of short fiber reinforced rubber composites under transverse load
journal, July 2016
- Chen, Lili; Gu, Boqin
- Polymer Composites, Vol. 39, Issue 5
Multi-scale computational analysis of unidirectional carbon fiber reinforced polymer composites under various loading conditions
journal, July 2018
- Sun, Qingping; Meng, Zhaoxu; Zhou, Guowei
- Composite Structures, Vol. 196
Modelling of mechanical properties of randomly oriented strand thermoplastic composites
journal, July 2016
- Selezneva, Marina; Roy, Steven; Meldrum, Sean
- Journal of Composite Materials, Vol. 51, Issue 6
Numerical evaluation of effective material properties of randomly distributed short cylindrical fibre composites
journal, March 2007
- Kari, S.; Berger, H.; Gabbert, U.
- Computational Materials Science, Vol. 39, Issue 1
Numerical simulation of the non-linear deformation of 5-harness satin weaves
journal, August 2012
- Melro, A. R.; Camanho, P. P.; Andrade Pires, F. M.
- Computational Materials Science, Vol. 61