Spall fracture in additive manufactured Ti-6Al-4V
- Authors:
-
- Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
- Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
- Publication Date:
- Research Org.:
- Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
- Sponsoring Org.:
- USDOE National Nuclear Security Administration (NNSA)
- OSTI Identifier:
- 1329904
- Alternate Identifier(s):
- OSTI ID: 1328489; OSTI ID: 1481089
- Report Number(s):
- LA-UR-16-22984; LLNL-JRNL-750765
Journal ID: ISSN 0021-8979; JAPIAU
- Grant/Contract Number:
- AC52-06NA25396; AC52-07NA27344
- Resource Type:
- Accepted Manuscript
- Journal Name:
- Journal of Applied Physics
- Additional Journal Information:
- Journal Volume: 120; Journal Issue: 13; Journal ID: ISSN 0021-8979
- Publisher:
- American Institute of Physics (AIP)
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 36 MATERIALS SCIENCE; Materials science, Physics - Condensed matter physics
Citation Formats
Jones, David Robert, Fensin, Saryu Jindal, Dippo, Olivia, Beal, Roberta Ann, Livescu, Verpnica, Martinez, Daniel Tito, Trujillo, Carl Patrick, Florando, J. N., Kumar, M., and Gray, III, George Thompson. Spall fracture in additive manufactured Ti-6Al-4V. United States: N. p., 2016.
Web. doi:10.1063/1.4963279.
Jones, David Robert, Fensin, Saryu Jindal, Dippo, Olivia, Beal, Roberta Ann, Livescu, Verpnica, Martinez, Daniel Tito, Trujillo, Carl Patrick, Florando, J. N., Kumar, M., & Gray, III, George Thompson. Spall fracture in additive manufactured Ti-6Al-4V. United States. https://doi.org/10.1063/1.4963279
Jones, David Robert, Fensin, Saryu Jindal, Dippo, Olivia, Beal, Roberta Ann, Livescu, Verpnica, Martinez, Daniel Tito, Trujillo, Carl Patrick, Florando, J. N., Kumar, M., and Gray, III, George Thompson. Tue .
"Spall fracture in additive manufactured Ti-6Al-4V". United States. https://doi.org/10.1063/1.4963279. https://www.osti.gov/servlets/purl/1329904.
@article{osti_1329904,
title = {Spall fracture in additive manufactured Ti-6Al-4V},
author = {Jones, David Robert and Fensin, Saryu Jindal and Dippo, Olivia and Beal, Roberta Ann and Livescu, Verpnica and Martinez, Daniel Tito and Trujillo, Carl Patrick and Florando, J. N. and Kumar, M. and Gray, III, George Thompson},
abstractNote = {},
doi = {10.1063/1.4963279},
journal = {Journal of Applied Physics},
number = 13,
volume = 120,
place = {United States},
year = {Tue Oct 04 00:00:00 EDT 2016},
month = {Tue Oct 04 00:00:00 EDT 2016}
}
Free Publicly Available Full Text
Publisher's Version of Record
Other availability
Cited by: 27 works
Citation information provided by
Web of Science
Web of Science
Save to My Library
You must Sign In or Create an Account in order to save documents to your library.
Works referenced in this record:
Effect of loading direction on grain boundary failure under shock loading
journal, February 2014
- Fensin, S. J.; Escobedo-Diaz, J. P.; Brandl, C.
- Acta Materialia, Vol. 64
Accuracy and precision in photonic Doppler velocimetry
journal, May 2010
- Dolan, D. H.
- Review of Scientific Instruments, Vol. 81, Issue 5
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
journal, May 2010
- Thijs, Lore; Verhaeghe, Frederik; Craeghs, Tom
- Acta Materialia, Vol. 58, Issue 9
Compact system for high-speed velocimetry using heterodyne techniques
journal, August 2006
- Strand, O. T.; Goosman, D. R.; Martinez, C.
- Review of Scientific Instruments, Vol. 77, Issue 8
As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting
journal, May 2011
- Vilaro, T.; Colin, C.; Bartout, J. D.
- Metallurgical and Materials Transactions A, Vol. 42, Issue 10
Dynamic Mechanical Behavior of Additively Manufactured Ti6Al4V With Controlled Voids
journal, April 2015
- Fadida, Refael; Rittel, Daniel; Shirizly, Amnon
- Journal of Applied Mechanics, Vol. 82, Issue 4
Consolidation phenomena in laser and powder-bed based layered manufacturing
journal, January 2007
- Kruth, J. -P.; Levy, G.; Klocke, F.
- CIRP Annals, Vol. 56, Issue 2
Spall fracture: methodological aspects, mechanisms and governing factors
journal, January 2010
- Kanel, G. I.
- International Journal of Fracture, Vol. 163, Issue 1-2
Microstructure and mechanical behavior of Ti–6Al–4V produced by rapid-layer manufacturing, for biomedical applications
journal, January 2009
- Murr, L. E.; Quinones, S. A.; Gaytan, S. M.
- Journal of the Mechanical Behavior of Biomedical Materials, Vol. 2, Issue 1
Microstructure and Mechanical Properties of Long Ti-6Al-4V Rods Additively Manufactured by Selective Electron Beam Melting Out of a Deep Powder Bed and the Effect of Subsequent Hot Isostatic Pressing
journal, May 2015
- Lu, S. L.; Tang, H. P.; Ning, Y. P.
- Metallurgical and Materials Transactions A, Vol. 46, Issue 9
Hugoniot and shear strength of titanium 6-4 under shock loading
conference, January 2000
- Hopkins, A.
- Shock compression of condensed matter, AIP Conference Proceedings
Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V
journal, October 2014
- Simonelli, M.; Tse, Y. Y.; Tuck, C.
- Materials Science and Engineering: A, Vol. 616
Role of geometry on properties of additively manufactured Ti-6Al-4V structures fabricated using laser based directed energy deposition
journal, September 2016
- Keist, Jayme S.; Palmer, Todd A.
- Materials & Design, Vol. 106
Shock response of Ti-6Al-4V
conference, January 2000
- Dandekar, Dattatraya P.
- Shock compression of condensed matter, AIP Conference Proceedings
Influence of grain boundary properties on spall strength: Grain boundary energy and excess volume
journal, October 2012
- Fensin, S. J.; Valone, S. M.; Cerreta, E. K.
- Journal of Applied Physics, Vol. 112, Issue 8
Spall studies on Ti6Al4V
journal, January 1987
- Me-Bar, Y.; Boas, M.; Rosenberg, Z.
- Materials Science and Engineering, Vol. 85
Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti–6Al–4V
journal, August 2013
- Qiu, Chunlei; Adkins, Nicholas J. E.; Attallah, Moataz M.
- Materials Science and Engineering: A, Vol. 578
Fatigue performance evaluation of selective laser melted Ti–6Al–4V
journal, March 2014
- Edwards, P.; Ramulu, M.
- Materials Science and Engineering: A, Vol. 598
Microstructure and mechanical properties of Ti–6Al–4V: Mill-annealed versus direct metal laser melted alloys
journal, June 2016
- Mulay, R. P.; Moore, J. A.; Florando, J. N.
- Materials Science and Engineering: A, Vol. 666
Response of high-purity titanium to high-pressure impulsive loading
journal, September 1995
- Razorenov, S. V.; Utkin, A. V.; Kanel, G. I.
- High Pressure Research, Vol. 13, Issue 6
The shock and spall response of three industrially important hexagonal close-packed metals: magnesium, titanium and zirconium
journal, August 2014
- Hazell, P. J.; Appleby-Thomas, G. J.; Wielewski, E.
- Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, Vol. 372, Issue 2023
The role of anisotropy in the response of the titanium alloy Ti–6Al–4V to shock loading
journal, January 2008
- Millett, J. C. F.; Whiteman, G.; Bourne, N. K.
- Journal of Applied Physics, Vol. 104, Issue 7
Effects of grain size and boundary structure on the dynamic tensile response of copper
journal, August 2011
- Escobedo, J. P.; Dennis-Koller, D.; Cerreta, E. K.
- Journal of Applied Physics, Vol. 110, Issue 3
Shear stress and spall strength of materials under shock loads (review)
journal, January 1981
- Novikov, S. A.
- Journal of Applied Mechanics and Technical Physics, Vol. 22, Issue 3
A Review of Additive Manufacturing
journal, January 2012
- Wong, Kaufui V.; Hernandez, Aldo
- ISRN Mechanical Engineering, Vol. 2012
A comparison of the tensile, fatigue, and fracture behavior of Ti–6Al–4V and 15-5 PH stainless steel parts made by selective laser melting
journal, June 2013
- Rafi, H. Khalid; Starr, Thomas L.; Stucker, Brent E.
- The International Journal of Advanced Manufacturing Technology, Vol. 69, Issue 5-8
Spallation in the Alloy Ti-6Al-4V
conference, January 2002
- Church, P. D.
- Shock Compression of Condensed Matter - 2001: 12th APS Topical Conference, AIP Conference Proceedings
Works referencing / citing this record:
Effect of peak stress and tensile strain-rate on spall in tantalum
journal, August 2018
- Jones, D. R.; Fensin, S. J.; Martinez, D. T.
- Journal of Applied Physics, Vol. 124, Issue 8
Spall fracture in additive manufactured tantalum
journal, December 2018
- Jones, D. R.; Fensin, S. J.; Ndefru, B. G.
- Journal of Applied Physics, Vol. 124, Issue 22