Mechanical, thermal, morphological, and rheological characteristics of high performance 3D-printing lignin-based composites for additive manufacturing applications

Nguyen, Ngoc A.; Bowland, Christopher C.; Naskar, Amit K.

doi:10.1016/j.dib.2018.05.130

Title: Mechanical, thermal, morphological, and rheological characteristics of high performance 3D-printing lignin-based composites for additive manufacturing applications

Full Record
Other Related Research

Abstract

Here, the article presents different mechanical, thermal and rheological data corresponding to the morphological formation within various renewable lignin-based composites containing acrylonitrile butadiene styrene (ABS), acrylonitrile butadiene rubber (NBR41, 41 mol% nitrile content), and carbon fibers (CFs). The data of 3D-printing properties and morphology of 3D-printed layers of selected lignin-based composites are revealed.

Authors:: Nguyen, Ngoc A.; Bowland, Christopher C.; Naskar, Amit K.

Publication Date:: Wed Aug 01 00:00:00 EDT 2018

Research Org.:: Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)

Sponsoring Org.:: USDOE Office of Energy Efficiency and Renewable Energy (EERE)

OSTI Identifier:: 1440256

Alternate Identifier(s):: OSTI ID: 1457177

Grant/Contract Number:: AC05-00OR22725

Resource Type:: Published Article

Journal Name:: Data in Brief

Additional Journal Information:: Journal Name: Data in Brief Journal Volume: 19 Journal Issue: C; Journal ID: ISSN 2352-3409

Publisher:: Elsevier

Country of Publication:: United States

Language:: English

Subject:: 36 MATERIALS SCIENCE; 42 ENGINEERING

Citation Formats


                    Nguyen, Ngoc A., Bowland, Christopher C., and Naskar, Amit K. Mechanical, thermal, morphological, and rheological characteristics of high performance 3D-printing lignin-based composites for additive manufacturing applications.  United States: N. p., 2018. 
Web.  doi:10.1016/j.dib.2018.05.130.

Copy to clipboard


                    Nguyen, Ngoc A., Bowland, Christopher C., & Naskar, Amit K. Mechanical, thermal, morphological, and rheological characteristics of high performance 3D-printing lignin-based composites for additive manufacturing applications.  United States.  https://doi.org/10.1016/j.dib.2018.05.130

Copy to clipboard


                    Nguyen, Ngoc A., Bowland, Christopher C., and Naskar, Amit K. Wed .  
"Mechanical, thermal, morphological, and rheological characteristics of high performance 3D-printing lignin-based composites for additive manufacturing applications".  United States.  https://doi.org/10.1016/j.dib.2018.05.130.

Copy to clipboard


                    
@article{osti_1440256,

  title        = {Mechanical, thermal, morphological, and rheological characteristics of high performance 3D-printing lignin-based composites for additive manufacturing applications},

  author       = {Nguyen, Ngoc A. and Bowland, Christopher C. and Naskar, Amit K.},

  abstractNote = {Here, the article presents different mechanical, thermal and rheological data corresponding to the morphological formation within various renewable lignin-based composites containing acrylonitrile butadiene styrene (ABS), acrylonitrile butadiene rubber (NBR41, 41 mol% nitrile content), and carbon fibers (CFs). The data of 3D-printing properties and morphology of 3D-printed layers of selected lignin-based composites are revealed.},

  doi          = {10.1016/j.dib.2018.05.130},

  journal      = {Data in Brief},

  number       = C,

  volume       = 19,

  place        = {United States},

  year         = {Wed Aug 01 00:00:00 EDT 2018},

  month        = {Wed Aug 01 00:00:00 EDT 2018}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Publisher's Version of Record
https://doi.org/10.1016/j.dib.2018.05.130

Other availability

Search WorldCat to find libraries that may hold this journal

Save / Share:

Export Metadata

Save to My Library

Similar Records in DOE PAGES and OSTI.GOV collections:

A general method to improve 3D-printability and inter-layer adhesion in lignin-based composites

Journal Article Nguyen, Ngoc A. ; Bowland, Christopher C. ; Naskar, Amit K. - Applied Materials Today

Here, we report the utilization of a melt-stable lignin waste-stream from biorefineries as a renewable feedstock, with acrylonitrile-butadiene rubber and acrylonitrile-butadiene-styrene (ABS) polymer to synthesize a renewable matrix having excellent 3D-printability. While the initial low melt viscosity of the dispersed lignin phase induces local thermo-rheological relaxation facilitating the composite's melt flow, thermal crosslinking in both lignin and rubber phases as well as at the lignin-rubber interface decreases the molecular mobility. Consequently, interfacial diffusion and the resulting adhesion between deposited layers is decreased. However, addition of 10 wt.% of discontinuous carbon fibers (CFs) within the green composites not only significantly enhancesmore »« less
Cited by 90
https://doi.org/10.1016/j.apmt.2018.03.009
A path for lignin valorization via additive manufacturing of high-performance sustainable composites with enhanced 3D printability

Journal Article Nguyen, Ngoc A. ; Barnes, Sietske H. ; Bowland, Christopher C. ; ... - Science Advances

Here, we report the manufacture of printable, sustainable polymer systems to address global challenges associated with high-volume utilization of lignin, an industrial waste from biomass feedstock. By analyzing a common three-dimensional printing process—fused-deposition modeling—and correlating the printing-process features to properties of materials such as acrylonitrile-butadiene-styrene (ABS) and nylon, we devised a first-of-its-kind, high-performance class of printable renewable composites containing 40 to 60 weight % (wt %) lignin. An ABS analog made by integrating lignin into nitrile-butadiene rubber needs the presence of a styrenic polymer to avoid filament buckling during printing. However, lignin-modified nylon composites containing 40 to 60 wt %more »« less
Cited by 95
https://doi.org/10.1126/sciadv.aat4967

Full Text Available
Effects of graphene surface functionalities towards controlled reinforcement of a lignin based renewable thermoplastic rubber

Journal Article Jang, Gyoung Gug ; Nguyen, Ngoc A. ; Bowland, Christopher ; ... - Composites Science and Technology

In this report, we describe methods to enhance mechanical properties of a renewable thermoplastic rubber by incorporating functional graphene platelets into an equal-mass mixture of lignin, a feedstock from plant biomass, and a nitrile-butadiene rubber having 41 mol % acrylonitrile content (NBR41) that form a nanocomposite. Not all lignins yield mechanically strong material when they are combined with NBR41, and thus, limit its use for such rubbery products. Here, we evaluate different graphene oxides (GO) and reduced graphene oxides (rGO) dry-powders with different surface areas, functionality, and wettability in the synthesis of performance-enhanced nanocomposites of soft lignin/NBR41 matrix via amore »« less
https://doi.org/10.1016/j.compscitech.2020.108352

Full Text Available
Rheological survey of carbon fiber-reinforced high-temperature thermoplastics for big area additive manufacturing tooling applications

Journal Article Ajinjeru, Christine ; Kishore, Vidya ; Chen, Xun ; ... - Journal of Thermoplastic Composite Materials

Carbon fiber (CF)-reinforced thermoplastic composites have been widely used in different structural applications due to their superior thermal and mechanical properties. The big area additive manufacturing (BAAM) system, developed at Oak Ridge National Laboratory’s Manufacturing Demonstration Facility, has been used to manufacture several composite components, demonstration vehicles, molds, and dies. These components have been designed and fabricated using various CF-reinforced thermoplastics. In this study, the dynamic rheological and mechanical properties of a material commonly used in additive manufacturing, 20 wt% CF-acrylonitrile butadiene styrene (ABS), as well as three CF-reinforced high-temperature polymers, 25 wt% CF-polyphenylsulfone (PPSU), 35 wt% CF-polyethersulfone (PES), andmore »« less
Cited by 21
https://doi.org/10.1177/0892705719873941

Full Text Available
A renewable lignin-based thermoplastic adhesive for steel joining

Journal Article Kanbargi, Nihal ; Hoskins, David ; Gupta, Sumit ; ... - European Polymer Journal

Adhesive bonding of metals has become increasingly relevant in recent years due to the demand for reducing weight and improving performance in structural applications such as automobiles and aerospace. We developed renewable thermoplastic adhesives from technical organosolv lignin isolated from hardwood biomass and acrylonitrile butadiene co-polymer rubber (NBR) for joining steel substrates. NBR33, NBR41 and NBR51 with acrylonitrile molar ratios of 33, 41 and 51%, respectively, were blended with lignin to form two-phase thermoplastic adhesives, and their adhesion, viscoelastic and surface properties were measured. Lignin content in the compositions were varied, ranging from 40% to 80% (w/w), to alter toughness,more »« less
https://doi.org/10.1016/j.eurpolymj.2023.111981

Full Text Available

Similar Records