Search Menu
DOE PAGES title logo U.S. Department of Energy
Office of Scientific and Technical Information
Search Scholarly Publications

Title: A stable partitioned FSI algorithm for rigid bodies and incompressible flow. Part I: Model problem analysis

Abstract

A stable partitioned algorithm is developed for fluid-structure interaction (FSI) problems involving viscous incompressible flow and rigid bodies. This added-mass partitioned (AMP) algorithm remains stable, without sub-iterations, for light and even zero mass rigid bodies when added-mass and viscous added-damping effects are large. The scheme is based on a generalized Robin interface condition for the fluid pressure that includes terms involving the linear acceleration and angular acceleration of the rigid body. Added mass effects are handled in the Robin condition by inclusion of a boundary integral term that depends on the pressure. Added-damping effects due to the viscous shear forces on the body are treated by inclusion of added-damping tensors that are derived through a linearization of the integrals defining the force and torque. Added-damping effects may be important at low Reynolds number, or, for example, in the case of a rotating cylinder or rotating sphere when the rotational moments of inertia are small. In this second part of a two-part series, the general formulation of the AMP scheme is presented including the form of the AMP interface conditions and added-damping tensors for general geometries. A fully second-order accurate implementation of the AMP scheme is developed in two dimensions basedmore » on a fractional-step method for the incompressible Navier-Stokes equations using finite difference methods and overlapping grids to handle the moving geometry. Here, the numerical scheme is verified on a number of difficult benchmark problems.« less

Authors:
 [1];  [1];  [1];  [1]
+ Show Author Affiliations
  1. Rensselaer Polytechnic Inst., Troy, NY (United States)
Publication Date:
Research Org.:
Rensselaer Polytechnic Inst., Troy, NY (United States)
Sponsoring Org.:
USDOE Office of Science (SC), Advanced Scientific Computing Research (ASCR)
OSTI Identifier:
1353365
Alternate Identifier(s):
OSTI ID: 1439534
Grant/Contract Number:  
AC52-07NA27344
Resource Type:
Accepted Manuscript
Journal Name:
Journal of Computational Physics
Additional Journal Information:
Journal Volume: 343; Journal Issue: C; Journal ID: ISSN 0021-9991
Publisher:
Elsevier
Country of Publication:
United States
Language:
English
Subject:
97 MATHEMATICS AND COMPUTING; fluid-structure interaction; moving overlapping; grids; incompressible Navier-Stokes; partitioned schemes; added-mass; added-damping; rigid bodies

Citation Formats

Banks, J. W., Henshaw, W. D., Schwendeman, D. W., and Tang, Qi. A stable partitioned FSI algorithm for rigid bodies and incompressible flow. Part I: Model problem analysis. United States: N. p., 2017. Web. doi:10.1016/j.jcp.2017.01.015.
Copy to clipboard
Banks, J. W., Henshaw, W. D., Schwendeman, D. W., & Tang, Qi. A stable partitioned FSI algorithm for rigid bodies and incompressible flow. Part I: Model problem analysis. United States. https://doi.org/10.1016/j.jcp.2017.01.015
Copy to clipboard
Banks, J. W., Henshaw, W. D., Schwendeman, D. W., and Tang, Qi. Fri . "A stable partitioned FSI algorithm for rigid bodies and incompressible flow. Part I: Model problem analysis". United States. https://doi.org/10.1016/j.jcp.2017.01.015. https://www.osti.gov/servlets/purl/1353365.
Copy to clipboard
@article{osti_1353365,
title = {A stable partitioned FSI algorithm for rigid bodies and incompressible flow. Part I: Model problem analysis},
author = {Banks, J. W. and Henshaw, W. D. and Schwendeman, D. W. and Tang, Qi},
abstractNote = {A stable partitioned algorithm is developed for fluid-structure interaction (FSI) problems involving viscous incompressible flow and rigid bodies. This added-mass partitioned (AMP) algorithm remains stable, without sub-iterations, for light and even zero mass rigid bodies when added-mass and viscous added-damping effects are large. The scheme is based on a generalized Robin interface condition for the fluid pressure that includes terms involving the linear acceleration and angular acceleration of the rigid body. Added mass effects are handled in the Robin condition by inclusion of a boundary integral term that depends on the pressure. Added-damping effects due to the viscous shear forces on the body are treated by inclusion of added-damping tensors that are derived through a linearization of the integrals defining the force and torque. Added-damping effects may be important at low Reynolds number, or, for example, in the case of a rotating cylinder or rotating sphere when the rotational moments of inertia are small. In this second part of a two-part series, the general formulation of the AMP scheme is presented including the form of the AMP interface conditions and added-damping tensors for general geometries. A fully second-order accurate implementation of the AMP scheme is developed in two dimensions based on a fractional-step method for the incompressible Navier-Stokes equations using finite difference methods and overlapping grids to handle the moving geometry. Here, the numerical scheme is verified on a number of difficult benchmark problems.},
doi = {10.1016/j.jcp.2017.01.015},
journal = {Journal of Computational Physics},
number = C,
volume = 343,
place = {United States},
year = {Fri Jan 20 00:00:00 EST 2017},
month = {Fri Jan 20 00:00:00 EST 2017}
}
Copy to clipboard
Journal Article:
Free Publicly Available Full Text
Publisher's Version of Record
https://doi.org/10.1016/j.jcp.2017.01.015
Copyright Statement
Other availability
Search WorldCat Search WorldCat to find libraries that may hold this journal
Citation Metrics:
Cited by: 14 works
Citation information provided by
Web of Science
Save / Share:
Export Metadata
Save to My Library
You must Sign In or Create an Account in order to save documents to your library.

Works referenced in this record:

An arbitrary Lagrangian-Eulerian finite element method for interaction of fluid and a rigid body
journal, February 1992

  • Takashi, Nomura; Hughes, Thomas J. R.
  • Computer Methods in Applied Mechanics and Engineering, Vol. 95, Issue 1
  • DOI: 10.1016/0045-7825(92)90085-X

Direct Numerical Simulations of Fluid–Solid Systems Using the Arbitrary Lagrangian–Eulerian Technique
journal, May 2001

  • Hu, Howard H.; Patankar, N. A.; Zhu, M. Y.
  • Journal of Computational Physics, Vol. 169, Issue 2
  • DOI: 10.1006/jcph.2000.6592

Analysis and Stabilization of Fluid-Structure Interaction Algorithm for Rigid-Body Motion
journal, December 2005

  • Vierendeels, Jan; Dumont, Kris; Dick, Erik
  • AIAA Journal, Vol. 43, Issue 12
  • DOI: 10.2514/1.3660

A vortex level set method for the two-way coupling of an incompressible fluid with colliding rigid bodies
journal, November 2008

Efficient symmetric positive definite second-order accurate monolithic solver for fluid/solid interactions
journal, April 2012

A distributed Lagrange multiplier/fictitious domain method for particulate flows
journal, August 1999

A distributed Lagrange multiplier/fictitious domain method for the simulation of flow around moving rigid bodies: application to particulate flow
journal, April 2000

  • Glowinski, Roland; Pan, Tsorng-Whay; Hesla, Todd I.
  • Computer Methods in Applied Mechanics and Engineering, Vol. 184, Issue 2-4
  • DOI: 10.1016/S0045-7825(99)00230-3

A Fictitious Domain Approach to the Direct Numerical Simulation of Incompressible Viscous Flow past Moving Rigid Bodies: Application to Particulate Flow
journal, May 2001

  • Glowinski, R.; Pan, T. W.; Hesla, T. I.
  • Journal of Computational Physics, Vol. 169, Issue 2
  • DOI: 10.1006/jcph.2000.6542

An embedded strategy for the analysis of fluid structure interaction problems
journal, March 2016

  • Costarelli, Santiago D.; Garelli, Luciano; Cruchaga, Marcela A.
  • Computer Methods in Applied Mechanics and Engineering, Vol. 300
  • DOI: 10.1016/j.cma.2015.11.001

Interaction between particle clusters and particle-induced turbulence
journal, October 2002

An immersed boundary method with direct forcing for the simulation of particulate flows
journal, November 2005

Immersed boundary method for flow around an arbitrarily moving body
journal, March 2006

Immersed finite element method for rigid body motions in the incompressible Navier–Stokes flow
journal, April 2008

  • Lee, Tae-Rin; Chang, Yoon-Suk; Choi, Jae-Boong
  • Computer Methods in Applied Mechanics and Engineering, Vol. 197, Issue 25-28
  • DOI: 10.1016/j.cma.2007.12.013

Curvilinear immersed boundary method for simulating fluid structure interaction with complex 3D rigid bodies
journal, August 2008

  • Borazjani, Iman; Ge, Liang; Sotiropoulos, Fotis
  • Journal of Computational Physics, Vol. 227, Issue 16
  • DOI: 10.1016/j.jcp.2008.04.028

A second-order accurate immersed boundary method for fully resolved simulations of particle-laden flows
journal, May 2012

An improved immersed boundary method with direct forcing for the simulation of particle laden flows
journal, May 2012

A simple and efficient direct forcing immersed boundary framework for fluid–structure interactions
journal, June 2012

A unified mathematical framework and an adaptive numerical method for fluid–structure interaction with rigid, deforming, and elastic bodies
journal, October 2013

  • Bhalla, Amneet Pal Singh; Bale, Rahul; Griffith, Boyce E.
  • Journal of Computational Physics, Vol. 250
  • DOI: 10.1016/j.jcp.2013.04.033

A non-iterative direct forcing immersed boundary method for strongly-coupled fluid–solid interactions
journal, August 2015

Strongly coupled dynamics of fluids and rigid-body systems with the immersed boundary projection method
journal, August 2015

A penalty immersed boundary method for a rigid body in fluid
journal, March 2016

  • Kim, Yongsam; Peskin, Charles S.
  • Physics of Fluids, Vol. 28, Issue 3
  • DOI: 10.1063/1.4944565

A stable fluid–structure-interaction solver for low-density rigid bodies using the immersed boundary projection method
journal, January 2016

Added mass and damping in fluid-structure interaction
journal, July 1997

  • Conca, C.; Osses, A.; Planchard, J.
  • Computer Methods in Applied Mechanics and Engineering, Vol. 146, Issue 3-4
  • DOI: 10.1016/S0045-7825(96)01246-7

A symmetric positive definite formulation for monolithic fluid structure interaction
journal, February 2011

  • Robinson-Mosher, Avi; Schroeder, Craig; Fedkiw, Ronald
  • Journal of Computational Physics, Vol. 230, Issue 4
  • DOI: 10.1016/j.jcp.2010.11.021

Splitting Methods Based on Algebraic Factorization for Fluid-Structure Interaction
journal, January 2008

  • Badia, Santiago; Quaini, Annalisa; Quarteroni, Alfio
  • SIAM Journal on Scientific Computing, Vol. 30, Issue 4
  • DOI: 10.1137/070680497

A Fourth-Order Accurate Method for the Incompressible Navier-Stokes Equations on Overlapping Grids
journal, July 1994

A stable partitioned FSI algorithm for rigid bodies and incompressible flow. Part II: General formulation
journal, August 2017

Moving overlapping grids with adaptive mesh refinement for high-speed reactive and non-reactive flow
journal, August 2006

  • Henshaw, William D.; Schwendeman, Donald W.
  • Journal of Computational Physics, Vol. 216, Issue 2
  • DOI: 10.1016/j.jcp.2006.01.005

A stable FSI algorithm for light rigid bodies in compressible flow
journal, July 2013

Deforming composite grids for solving fluid structure problems
journal, May 2012

  • Banks, Jeffrey W.; Henshaw, William D.; Schwendeman, Donald W.
  • Journal of Computational Physics, Vol. 231, Issue 9
  • DOI: 10.1016/j.jcp.2011.12.034

An added-mass partition algorithm for fluid–structure interactions of compressible fluids and nonlinear solids
journal, January 2016

An analysis of a new stable partitioned algorithm for FSI problems. Part I: Incompressible flow and elastic solids
journal, July 2014

An analysis of a new stable partitioned algorithm for FSI problems. Part II: Incompressible flow and structural shells
journal, July 2014

A stable partitioned FSI algorithm for incompressible flow and deforming beams
journal, May 2016

Stability of Pressure Boundary Conditions for Stokes and Navier–Stokes Equations
journal, September 2001

Stability theory of difference approximations for mixed initial boundary value problems. II
journal, September 1972

    Sort by:
    [ × clear filter / sort ]

    Works referencing / citing this record:

    A stable added-mass partitioned (AMP) algorithm for elastic solids and incompressible flow
    journal, December 2019

    A Stable Added-Mass Partitioned (AMP) Algorithm for Elastic Solids and Incompressible Flow: Model Problem Analysis
    journal, January 2019

    • Serino, Daniel A.; Banks, Jeffrey W.; Henshaw, William D.
    • SIAM Journal on Scientific Computing, Vol. 41, Issue 4
    • DOI: 10.1137/18m1232358

    A stable partitioned FSI algorithm for rigid bodies and incompressible flow. Part II: General formulation
    journal, August 2017

      Sort by:
      [ × clear filter / sort ]

      Similar Records in DOE PAGES and OSTI.GOV collections: