Characterisation of a complex thin walled structure fabricated by selective laser melting using a ferritic oxide dispersion strengthened steel

Boegelein, Thomas; Louvis, Eleftherios; Dawson, Karl; Tatlock, Gordon J.; Jones, Andy R.

doi:10.1016/j.matchar.2015.11.021

Title: Characterisation of a complex thin walled structure fabricated by selective laser melting using a ferritic oxide dispersion strengthened steel

Authors:: Boegelein, Thomas; Louvis, Eleftherios; Dawson, Karl; Tatlock, Gordon J.; Jones, Andy R.

Publication Date:: Mon Feb 01 00:00:00 EST 2016

Sponsoring Org.:: USDOE Office of Fossil Energy and Carbon Management (FECM)

OSTI Identifier:: 1396958

Resource Type:: Publisher's Accepted Manuscript

Journal Name:: Materials Characterization

Additional Journal Information:: Journal Name: Materials Characterization Journal Volume: 112 Journal Issue: C; Journal ID: ISSN 1044-5803

Publisher:: Elsevier

Country of Publication:: United States

Language:: English

Citation Formats


                    Boegelein, Thomas, Louvis, Eleftherios, Dawson, Karl, Tatlock, Gordon J., and Jones, Andy R. Characterisation of a complex thin walled structure fabricated by selective laser melting using a ferritic oxide dispersion strengthened steel.  United States: N. p., 2016. 
Web.  doi:10.1016/j.matchar.2015.11.021.

Copy to clipboard


                    Boegelein, Thomas, Louvis, Eleftherios, Dawson, Karl, Tatlock, Gordon J., & Jones, Andy R. Characterisation of a complex thin walled structure fabricated by selective laser melting using a ferritic oxide dispersion strengthened steel.  United States.  https://doi.org/10.1016/j.matchar.2015.11.021

Copy to clipboard


                    Boegelein, Thomas, Louvis, Eleftherios, Dawson, Karl, Tatlock, Gordon J., and Jones, Andy R. Mon .  
"Characterisation of a complex thin walled structure fabricated by selective laser melting using a ferritic oxide dispersion strengthened steel".  United States.  https://doi.org/10.1016/j.matchar.2015.11.021.

Copy to clipboard


                    
@article{osti_1396958,

  title        = {Characterisation of a complex thin walled structure fabricated by selective laser melting using a ferritic oxide dispersion strengthened steel},

  author       = {Boegelein, Thomas and Louvis, Eleftherios and Dawson, Karl and Tatlock, Gordon J. and Jones, Andy R.},

  abstractNote = {},

  doi          = {10.1016/j.matchar.2015.11.021},

  journal      = {Materials Characterization},

  number       = C,

  volume       = 112,

  place        = {United States},

  year         = {Mon Feb 01 00:00:00 EST 2016},

  month        = {Mon Feb 01 00:00:00 EST 2016}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (Publisher)

Publisher's Version of Record
https://doi.org/10.1016/j.matchar.2015.11.021

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 44 works

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Works referenced in this record:

Effect of Minor Alloying Element on Dispersing Nano-particles in ODS Steel
journal, January 2006

Uchidi, Y.; Ohnuki, S.; Hashimoto, N.
MRS Proceedings, Vol. 981
DOI: 10.1557/PROC-981-0981-JJ07-09

High efficiency electric power generation: The environmental role
journal, April 2007

Beér, János M.
Progress in Energy and Combustion Science, Vol. 33, Issue 2
DOI: 10.1016/j.pecs.2006.08.002

Changes in Precipitate Distributions and the Microstructural Evolution of P24/P91 Dissimilar Metal Welds During PWHT
journal, July 2013

Dawson, Karl E.; Tatlock, Gordon J.; Chi, Kuangnan
Metallurgical and Materials Transactions A, Vol. 44, Issue 11
DOI: 10.1007/s11661-013-1880-y

Formation of $Y_{2} O_{3}$ nanoclusters in nanostructured ferritic alloys during isothermal and anisothermal heat treatment: A kinetic Monte Carlo study
journal, October 2009

Hin, C.; Wirth, B. D.; Neaton, J. B.
Physical Review B, Vol. 80, Issue 13
DOI: 10.1103/PhysRevB.80.134118

Residual stresses in selective laser sintering and selective laser melting
journal, October 2006

Mercelis, Peter; Kruth, Jean‐Pierre
Rapid Prototyping Journal, Vol. 12, Issue 5
DOI: 10.1108/13552540610707013

Stereological estimation of microstructural parameters of nickel-based superalloy Waspaloy using TEM methods
journal, February 2001

Wosik, Jarosław; Dubiel, Beata; Kruk, Adam
Materials Characterization, Vol. 46, Issue 2-3
DOI: 10.1016/S1044-5803(01)00112-7

Experimental observations in support of the dynamic-segregation theory to explain the reactive-element effect
journal, February 1996

Pint, B. A.
Oxidation of Metals, Vol. 45, Issue 1-2
DOI: 10.1007/BF01046818

EELS log-ratio technique for specimen-thickness measurement in the TEM
journal, February 1988

Malis, T.; Cheng, S. C.; Egerton, R. F.
Journal of Electron Microscopy Technique, Vol. 8, Issue 2
DOI: 10.1002/jemt.1060080206

Residual Stress within Metallic Model Made by Selective Laser Melting Process
journal, January 2004

Shiomi, M.; Osakada, K.; Nakamura, K.
CIRP Annals, Vol. 53, Issue 1
DOI: 10.1016/S0007-8506(07)60677-5

Alloying design of oxide dispersion strengthened ferritic steel for long life FBRs core materials
journal, September 1993

Ukai, S.; Harada, M.; Okada, H.
Journal of Nuclear Materials, Vol. 204
DOI: 10.1016/0022-3115(93)90200-I

TEM characterization of structure and composition of nanosized ODS particles in reduced activation ferritic–martensitic steels
journal, August 2004

Klimiankou, M.; Lindau, R.; Möslang, A.
Journal of Nuclear Materials, Vol. 329-333
DOI: 10.1016/j.jnucmat.2004.04.083

Mechanically alloyed metals
journal, November 2000

Bhadeshia, H. K. D. H.
Materials Science and Technology, Vol. 16, Issue 11-12
DOI: 10.1179/026708300101507361

Mechanical response and deformation mechanisms of ferritic oxide dispersion strengthened steel structures produced by selective laser melting
journal, April 2015

Boegelein, Thomas; Dryepondt, Sebastien N.; Pandey, Amit
Acta Materialia, Vol. 87
DOI: 10.1016/j.actamat.2014.12.047

Prologue
book, January 2003

Steen, William M.
Laser Material Processing
DOI: 10.1007/978-1-4471-3752-8_1

The high-temperatures bonding of graphite/ceramics by organ resin matrix adhesive
journal, October 2006

Wang, Jigang; Jiang, Nan; Jiang, Haiyun
International Journal of Adhesion and Adhesives, Vol. 26, Issue 7
DOI: 10.1016/j.ijadhadh.2005.07.005

Selective Laser Melting of Oxide Dispersion Strengthened Steels
conference, January 2011

Boegelein, Thomas; Rao, Ashwin; Jones, Andrew R.
Volume 6: Materials and Fabrication, Parts A and B
DOI: 10.1115/PVP2011-57892

Laser welding of oxide dispersion-strengthened alloy MA754
journal, January 1992

Molian, P. A.; Yang, Y. M.; Patnaik, P. C.
Journal of Materials Science, Vol. 27, Issue 10
DOI: 10.1007/BF00540691

The stability of the oxide dispersion in INCONEL alloy MA6000
journal, September 1989

Schaffer, G. B.; Loretto, M. H.; Smallman, R. E.
Acta Metallurgica, Vol. 37, Issue 9
DOI: 10.1016/0001-6160(89)90053-9

TEM study of PM 2000 steel
journal, September 2005

Klimiankou, M.; Lindau, R.; Möslang, A.
Powder Metallurgy, Vol. 48, Issue 3
DOI: 10.1179/174329005X64171

Evaluation of Helium effects on swelling behavior of oxide dispersion strengthened ferritic steels under ion irradiation
journal, August 2007

Yutani, K.; Kishimoto, H.; Kasada, R.
Journal of Nuclear Materials, Vol. 367-370
DOI: 10.1016/j.jnucmat.2007.03.016

Oxide dispersion strengthened nickel based alloys via spark plasma sintering
journal, April 2015

Pasebani, Somayeh; Dutt, Aniket K.; Burns, Jatuporn
Materials Science and Engineering: A, Vol. 630
DOI: 10.1016/j.msea.2015.01.066

Novel synthesis of Y3Al5O12 (YAG) leading to transparent ceramics
journal, August 2001

Tachiwaki, Tokumatsu; Yoshinaka, Masaru; Hirota, Ken
Solid State Communications, Vol. 119, Issue 10-11
DOI: 10.1016/S0038-1098(01)00293-9

Balling behavior of stainless steel and nickel powder during selective laser melting process
journal, August 2011

Li, Ruidi; Liu, Jinhui; Shi, Yusheng
The International Journal of Advanced Manufacturing Technology, Vol. 59, Issue 9-12
DOI: 10.1007/s00170-011-3566-1

HRTEM study of oxide nanoparticles in K3-ODS ferritic steel developed for radiation tolerance
journal, February 2011

Hsiung, L.; Fluss, M.; Tumey, S.
Journal of Nuclear Materials, Vol. 409, Issue 2
DOI: 10.1016/j.jnucmat.2010.09.014

Interfacial strained structure and orientation relationships of the nanosized oxide particles deduced from elasticity-driven morphology in oxide dispersion strengthened materials
journal, January 2012

Ribis, J.; de Carlan, Y.
Acta Materialia, Vol. 60, Issue 1
DOI: 10.1016/j.actamat.2011.09.042

The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy
journal, December 2014

Carter, Luke N.; Martin, Christopher; Withers, Philip J.
Journal of Alloys and Compounds, Vol. 615
DOI: 10.1016/j.jallcom.2014.06.172

Selective laser melting of aluminium components
journal, February 2011

Louvis, Eleftherios; Fox, Peter; Sutcliffe, Christopher J.
Journal of Materials Processing Technology, Vol. 211, Issue 2
DOI: 10.1016/j.jmatprotec.2010.09.019

Pulsed YAG laser welding of ODS alloys
conference, January 1979

Kelly, T. J.
AIP Conference Proceedings Vol. 50
DOI: 10.1063/1.31662

Strain heterogeneity and the production of coarse grains in mechanically alloyed iron-based PM2000 alloy
journal, November 2001

Capdevila, C.; Miller, U.; Jelenak, H.
Materials Science and Engineering: A, Vol. 316, Issue 1-2
DOI: 10.1016/S0921-5093(01)01234-5

Dispersion strengthened superalloys by mechanical alloying
journal, October 1970

Benjamin, John S.
Metallurgical and Materials Transactions B, Vol. 1, Issue 10
DOI: 10.1007/BF03037835

An in situ powder neutron diffraction study of nano-precipitate formation during processing of oxide-dispersion-strengthened ferritic steels
journal, January 2014

Zhang, Hongtao; Gorley, Michael J.; Chong, Kok Boon
Journal of Alloys and Compounds, Vol. 582
DOI: 10.1016/j.jallcom.2013.08.069

Effects of milling process and alloying additions on oxide particle dispersion in austenitic stainless steel
journal, April 2014

Oka, Hiroshi; Watanabe, Masashi; Ohnuki, Somei
Journal of Nuclear Materials, Vol. 447, Issue 1-3
DOI: 10.1016/j.jnucmat.2014.01.025

Selective laser sintering of MA956 oxide dispersion strengthened steel
journal, September 2015

Hunt, Ryan M.; Kramer, Kevin J.; El-Dasher, Bassem
Journal of Nuclear Materials, Vol. 464
DOI: 10.1016/j.jnucmat.2015.04.011

On the Mechanism of High-Temperature Oxidation of ODS Superalloys: Significance of Yttrium Depletion Within the Oxide Scales
journal, January 1999

Weinbruch, S.; Anastassiadis, A.; Ortner, H. M.
Oxidation of Metals, Vol. 51, Issue 1/2, p. 111-128
DOI: 10.1023/A:1018806319821

Simultaneous orientation and thickness mapping in transmission electron microscopy
journal, March 2015

Tyutyunnikov, Dmitry; Burak Özdöl, V.; Koch, Christoph T.
Ultramicroscopy, Vol. 150
DOI: 10.1016/j.ultramic.2014.11.034

Formation of YAIO3 with Garnet structure
journal, July 1985

Yamaguchi, O.; Matui, K.; Shimizu, K.
Ceramics International, Vol. 11, Issue 3
DOI: 10.1016/0272-8842(85)90006-9

Polymorphic and coherency transition of Y–Al complex oxide particles with extrusion temperature in an Al-alloyed high-Cr oxide dispersion strengthened ferritic steel
journal, February 2011

Dou, P.; Kimura, A.; Okuda, T.
Acta Materialia, Vol. 59, Issue 3
DOI: 10.1016/j.actamat.2010.10.026

Atom probe tomography analysis of Ti-Y-O clustering during processing of nanoscale oxide particles in 14%Cr ODS ferritic steels
journal, January 2011

Williams, Ceri A.; Unifantowicz, Paulina; Oksiuta, Zbigniew
MRS Proceedings, Vol. 1298
DOI: 10.1557/opl.2011.328

Reactive gas atomization processing for Fe-based ODS alloys
journal, September 2012

Rieken, J. R.; Anderson, I. E.; Kramer, M. J.
Journal of Nuclear Materials, Vol. 428, Issue 1-3, p. 65-75
DOI: 10.1016/j.jnucmat.2011.08.015

Formation of an alumina layer on A FeCrAlY alloy by thermal oxidation for potential medical implant applications
journal, May 2001

Pérez, P.; Haanappel, V. A. C.; Stroosnijder, M. F.
Surface and Coatings Technology, Vol. 139, Issue 2-3
DOI: 10.1016/S0257-8972(00)01169-5

Fabrication of Fe-Cr-Al Oxide Dispersion Strengthened PM2000 Alloy Using Selective Laser Melting
journal, July 2009

Walker, John C.; Berggreen, Kaj M.; Jones, Andy R.
Advanced Engineering Materials, Vol. 11, Issue 7
DOI: 10.1002/adem.200800407

Similar Records in DOE PAGES and OSTI.GOV collections:

Characterisation of a complex thin walled structure fabricated by selective laser melting using a ferritic oxide dispersion strengthened steel

Journal Article Boegelein, Thomas ; Louvis, Eleftherios ; Dawson, Karl ; ... - Materials Characterization

Oxide dispersion strengthened (ODS) alloys exhibit superior mechanical and physical properties due to the presence of nanoscopic Y(Al, Ti) oxide precipitates, but their manufacturing process is complex. The present study is aimed at further investigation of the application of an alternative, Additive Manufacturing (AM) technique, Selective Laser Melting (SLM), to the production of consolidated ODS alloy components. Mechanically alloyed PM2000 (ODS-FeCrAl) powders have been consolidated and a fine dispersion of Y-containing precipitates were observed in an as built thin-walled component, but these particles were typically poly-crystalline and contained a variety of elements including O, Al, Ti, Cr and Fe. Applicationmore »« less
https://doi.org/10.1016/J.MATCHAR.2015.11.021
Mechanical response and deformation mechanisms of ferritic oxide dispersion strengthened steel structures produced by selective laser melting

Journal Article Boegelein, Thomas ; Dryepondt, Sebastien N. ; Pandey, Amit ; ... - Acta Materialia

Oxide dispersion strengthened (ODS) ferritic steels typically contain a fine dispersion of nanoscopic Y(Al, Ti) oxides, leading to an improvement in mechanical and physical properties. For a rapid prototyping technique, selective laser melting (SLM), was successfully applied to consolidate as-mechanically alloyed ODS-PM2000 (Fe 19Cr 5.5Al 0.5Ti 0.5Y₂O₃; all wt.%) powder to fabricate solid and thin-walled builds of different thickness. Our work is intended to act as a first study to investigate the tensile response of such configurations at room temperature, using miniaturized test specimens along and perpendicular to the growth direction. The 0.2% offset yield strength of as-grown wall buildsmore »« less
https://doi.org/10.1016/j.actamat.2014.12.047
Mechanical response and deformation mechanisms of ferritic oxide dispersion strengthened steel structures produced by selective laser melting

Journal Article Boegelein, Thomas ; Dryepondt, Sebastien N. ; Pandey, Amit ; ... - Acta Materialia
Cited by 110
https://doi.org/10.1016/j.actamat.2014.12.047
Selective laser melting of austenitic oxide dispersion strengthened steel: Processing, microstructural evolution and strengthening mechanisms

Journal Article Ghayoor, Milad ; Lee, Kijoon ; He, Yujuan ; ... - Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing

Not provided.
https://doi.org/10.1016/j.msea.2020.139532
Selective laser melting of austenitic oxide dispersion strengthened steel: Processing, microstructural evolution and strengthening mechanisms

Journal Article Ghayoor, Milad ; Lee, Kijoon ; He, Yujuan ; ... - Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing

Oxide dispersion strengthened (ODS) alloys exhibit superior mechanical properties due to the presence of nano-sized thermally stable oxide particles. However, manufacturing of ODS alloys is very complex and composed of numerous time consuming steps such as mechanical alloying, which is one of the main barriers toward the widespread application of ODS alloys. Light mixing of 304L stainless steel powder with sub-micrometer size yttria particles was coupled with selective laser melting (SLM) to produce 304L ODS nanocomposite. The added yttria was dissolved in the matrix due to the high intensity of the laser and altered the rheological properties of the meltmore »« less
https://doi.org/10.1016/j.msea.2020.139532

Full Text Available

Similar Records

Title: Characterisation of a complex thin walled structure fabricated by selective laser melting using a ferritic oxide dispersion strengthened steel

Citation Formats

Effect of Minor Alloying Element on Dispersing Nano-particles in ODS Steel journal, January 2006

High efficiency electric power generation: The environmental role journal, April 2007

Changes in Precipitate Distributions and the Microstructural Evolution of P24/P91 Dissimilar Metal Welds During PWHT journal, July 2013

Formation of Y 2 O 3 nanoclusters in nanostructured ferritic alloys during isothermal and anisothermal heat treatment: A kinetic Monte Carlo study journal, October 2009

Residual stresses in selective laser sintering and selective laser melting journal, October 2006

Stereological estimation of microstructural parameters of nickel-based superalloy Waspaloy using TEM methods journal, February 2001

Experimental observations in support of the dynamic-segregation theory to explain the reactive-element effect journal, February 1996

EELS log-ratio technique for specimen-thickness measurement in the TEM journal, February 1988

Residual Stress within Metallic Model Made by Selective Laser Melting Process journal, January 2004

Alloying design of oxide dispersion strengthened ferritic steel for long life FBRs core materials journal, September 1993

TEM characterization of structure and composition of nanosized ODS particles in reduced activation ferritic–martensitic steels journal, August 2004

Mechanically alloyed metals journal, November 2000

Mechanical response and deformation mechanisms of ferritic oxide dispersion strengthened steel structures produced by selective laser melting journal, April 2015

Prologue book, January 2003

The high-temperatures bonding of graphite/ceramics by organ resin matrix adhesive journal, October 2006

Selective Laser Melting of Oxide Dispersion Strengthened Steels conference, January 2011

Laser welding of oxide dispersion-strengthened alloy MA754 journal, January 1992

The stability of the oxide dispersion in INCONEL alloy MA6000 journal, September 1989

TEM study of PM 2000 steel journal, September 2005

Evaluation of Helium effects on swelling behavior of oxide dispersion strengthened ferritic steels under ion irradiation journal, August 2007

Oxide dispersion strengthened nickel based alloys via spark plasma sintering journal, April 2015

Novel synthesis of Y3Al5O12 (YAG) leading to transparent ceramics journal, August 2001

Balling behavior of stainless steel and nickel powder during selective laser melting process journal, August 2011

HRTEM study of oxide nanoparticles in K3-ODS ferritic steel developed for radiation tolerance journal, February 2011

Interfacial strained structure and orientation relationships of the nanosized oxide particles deduced from elasticity-driven morphology in oxide dispersion strengthened materials journal, January 2012

The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy journal, December 2014

Selective laser melting of aluminium components journal, February 2011

Pulsed YAG laser welding of ODS alloys conference, January 1979

Strain heterogeneity and the production of coarse grains in mechanically alloyed iron-based PM2000 alloy journal, November 2001

Dispersion strengthened superalloys by mechanical alloying journal, October 1970

An in situ powder neutron diffraction study of nano-precipitate formation during processing of oxide-dispersion-strengthened ferritic steels journal, January 2014

Effects of milling process and alloying additions on oxide particle dispersion in austenitic stainless steel journal, April 2014

Selective laser sintering of MA956 oxide dispersion strengthened steel journal, September 2015

On the Mechanism of High-Temperature Oxidation of ODS Superalloys: Significance of Yttrium Depletion Within the Oxide Scales journal, January 1999

Simultaneous orientation and thickness mapping in transmission electron microscopy journal, March 2015

Formation of YAIO3 with Garnet structure journal, July 1985

Polymorphic and coherency transition of Y–Al complex oxide particles with extrusion temperature in an Al-alloyed high-Cr oxide dispersion strengthened ferritic steel journal, February 2011

Atom probe tomography analysis of Ti-Y-O clustering during processing of nanoscale oxide particles in 14%Cr ODS ferritic steels journal, January 2011

Reactive gas atomization processing for Fe-based ODS alloys journal, September 2012

Formation of an alumina layer on A FeCrAlY alloy by thermal oxidation for potential medical implant applications journal, May 2001

Fabrication of Fe-Cr-Al Oxide Dispersion Strengthened PM2000 Alloy Using Selective Laser Melting journal, July 2009

Effect of Minor Alloying Element on Dispersing Nano-particles in ODS Steel
journal, January 2006

High efficiency electric power generation: The environmental role
journal, April 2007

Changes in Precipitate Distributions and the Microstructural Evolution of P24/P91 Dissimilar Metal Welds During PWHT
journal, July 2013

Formation of $Y_{2} O_{3}$ nanoclusters in nanostructured ferritic alloys during isothermal and anisothermal heat treatment: A kinetic Monte Carlo study
journal, October 2009

Residual stresses in selective laser sintering and selective laser melting
journal, October 2006

Stereological estimation of microstructural parameters of nickel-based superalloy Waspaloy using TEM methods
journal, February 2001

Experimental observations in support of the dynamic-segregation theory to explain the reactive-element effect
journal, February 1996

EELS log-ratio technique for specimen-thickness measurement in the TEM
journal, February 1988

Residual Stress within Metallic Model Made by Selective Laser Melting Process
journal, January 2004

Alloying design of oxide dispersion strengthened ferritic steel for long life FBRs core materials
journal, September 1993

TEM characterization of structure and composition of nanosized ODS particles in reduced activation ferritic–martensitic steels
journal, August 2004

Mechanically alloyed metals
journal, November 2000

Mechanical response and deformation mechanisms of ferritic oxide dispersion strengthened steel structures produced by selective laser melting
journal, April 2015

Prologue
book, January 2003

The high-temperatures bonding of graphite/ceramics by organ resin matrix adhesive
journal, October 2006

Selective Laser Melting of Oxide Dispersion Strengthened Steels
conference, January 2011

Laser welding of oxide dispersion-strengthened alloy MA754
journal, January 1992

The stability of the oxide dispersion in INCONEL alloy MA6000
journal, September 1989

TEM study of PM 2000 steel
journal, September 2005

Evaluation of Helium effects on swelling behavior of oxide dispersion strengthened ferritic steels under ion irradiation
journal, August 2007

Oxide dispersion strengthened nickel based alloys via spark plasma sintering
journal, April 2015

Novel synthesis of Y3Al5O12 (YAG) leading to transparent ceramics
journal, August 2001

Balling behavior of stainless steel and nickel powder during selective laser melting process
journal, August 2011

HRTEM study of oxide nanoparticles in K3-ODS ferritic steel developed for radiation tolerance
journal, February 2011

Interfacial strained structure and orientation relationships of the nanosized oxide particles deduced from elasticity-driven morphology in oxide dispersion strengthened materials
journal, January 2012

The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy
journal, December 2014

Selective laser melting of aluminium components
journal, February 2011

Pulsed YAG laser welding of ODS alloys
conference, January 1979

Strain heterogeneity and the production of coarse grains in mechanically alloyed iron-based PM2000 alloy
journal, November 2001

Dispersion strengthened superalloys by mechanical alloying
journal, October 1970

An in situ powder neutron diffraction study of nano-precipitate formation during processing of oxide-dispersion-strengthened ferritic steels
journal, January 2014

Effects of milling process and alloying additions on oxide particle dispersion in austenitic stainless steel
journal, April 2014

Selective laser sintering of MA956 oxide dispersion strengthened steel
journal, September 2015

On the Mechanism of High-Temperature Oxidation of ODS Superalloys: Significance of Yttrium Depletion Within the Oxide Scales
journal, January 1999

Simultaneous orientation and thickness mapping in transmission electron microscopy
journal, March 2015

Formation of YAIO3 with Garnet structure
journal, July 1985

Polymorphic and coherency transition of Y–Al complex oxide particles with extrusion temperature in an Al-alloyed high-Cr oxide dispersion strengthened ferritic steel
journal, February 2011

Atom probe tomography analysis of Ti-Y-O clustering during processing of nanoscale oxide particles in 14%Cr ODS ferritic steels
journal, January 2011

Reactive gas atomization processing for Fe-based ODS alloys
journal, September 2012

Formation of an alumina layer on A FeCrAlY alloy by thermal oxidation for potential medical implant applications
journal, May 2001

Fabrication of Fe-Cr-Al Oxide Dispersion Strengthened PM2000 Alloy Using Selective Laser Melting
journal, July 2009