Selective laser melting of austenitic oxide dispersion strengthened steel: Processing, microstructural evolution and strengthening mechanisms

Ghayoor, Milad; Lee, Kijoon; He, Yujuan; Chang, Chih-hung; Paul, Brian K.; Pasebani, Somayeh

doi:10.1016/j.msea.2020.139532

Title: Selective laser melting of austenitic oxide dispersion strengthened steel: Processing, microstructural evolution and strengthening mechanisms

Journal Article · Mon Jun 01 00:00:00 EDT 2020 · Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing

DOI:https://doi.org/10.1016/j.msea.2020.139532· OSTI ID:1799396

Ghayoor, Milad; Lee, Kijoon; He, Yujuan; Chang, Chih-hung; Paul, Brian K.; Pasebani, Somayeh

Not provided.

Cite

Export

Save

Research Organization:: American Institute of Chemical Engineers (AIChE), New York, NY (United States)

Sponsoring Organization:: USDOE Office of Energy Efficiency and Renewable Energy (EERE)

DOE Contract Number:: EE0007888

OSTI ID:: 1799396

Journal Information:: Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing, Vol. 788, Issue C; ISSN 0921-5093

Publisher:: Elsevier

Country of Publication:: United States

Language:: English

References (63)

Microstructural changes of neutron irradiated ODS ferritic and martensitic steels Akasaka, N.; Yamashita, S.; Yoshitake, T. Journal of Nuclear Materials, Vol. 329-333 https://doi.org/10.1016/j.jnucmat.2004.04.133	journal	August 2004
Structural materials for Gen-IV nuclear reactors: Challenges and opportunities Murty, K. L.; Charit, I. Journal of Nuclear Materials, Vol. 383, Issue 1-2 https://doi.org/10.1016/j.jnucmat.2008.08.044	journal	December 2008
Recent Developments in Irradiation-Resistant Steels Odette, G. R.; Alinger, M. J.; Wirth, B. D. Annual Review of Materials Research, Vol. 38, Issue 1, p. 471-503 https://doi.org/10.1146/annurev.matsci.38.060407.130315	journal	August 2008
Effects of milling process and alloying additions on oxide particle dispersion in austenitic stainless steel Oka, Hiroshi; Watanabe, Masashi; Ohnuki, Somei Journal of Nuclear Materials, Vol. 447, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2014.01.025	journal	April 2014
The interfacial orientation relationship of oxide nanoparticles in a hafnium-containing oxide dispersion-strengthened austenitic stainless steel Miao, Yinbin; Mo, Kun; Cui, Bai Materials Characterization, Vol. 101 https://doi.org/10.1016/j.matchar.2015.01.015	journal	March 2015
Microstructure and mechanical behavior of ODS and non-ODS Fe–14Cr model alloys produced by spark plasma sintering Auger, M. A.; de Castro, V.; Leguey, T. Journal of Nuclear Materials, Vol. 436, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2013.01.331	journal	May 2013
Fabrication of ODS Austenitic Steels and CoCrFeNi High-Entropy Alloys by Spark Plasma Sintering for Nuclear Energy Applications Yan, Xueliang; Zhang, Xiang; Wang, Fei JOM, Vol. 71, Issue 8 https://doi.org/10.1007/s11837-019-03531-7	journal	May 2019
Austenitic Oxide Dispersion Strengthened Steels : A Review Raman, Lavanya; Gothandapani, Karthick; Murty, B. S. Defence Science Journal, Vol. 66, Issue 4 https://doi.org/10.14429/dsj.66.10205	journal	June 2016
Tensile properties of mechanically alloyed Zr added austenitic stainless steel Morrall, Daniel; Gao, Jin; Zhang, Zhexian Nuclear Materials and Energy, Vol. 15 https://doi.org/10.1016/j.nme.2018.03.002	journal	May 2018
Processing and characterization of a hipped oxide dispersion strengthened austenitic steel Zhou, Zhangjian; Yang, Shuo; Chen, Wanhua Journal of Nuclear Materials, Vol. 428, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2011.08.027	journal	September 2012
Fabrication and characterization of ODS austenitic steels Xu, Yingli; Zhou, Zhangjian; Li, Ming Journal of Nuclear Materials, Vol. 417, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2010.12.155	journal	October 2011
Lanthana-bearing nanostructured ferritic steels via spark plasma sintering Pasebani, Somayeh; Charit, Indrajit; Wu, Yaqiao Journal of Nuclear Materials, Vol. 470 https://doi.org/10.1016/j.jnucmat.2015.12.035	journal	March 2016
Correlation between Milling Parameters, Structural and Mechanical Properties of Nanostructured Austenitic Y<sub>2</sub>O<sub>3</sub> Strengthened Steels Koncz, Péter; Horváth, Ákos; Balázsi, Katalin Materials Science Forum, Vol. 729 https://doi.org/10.4028/www.scientific.net/MSF.729.409	journal	November 2012
Oxide dispersion strengthened nickel based alloys via spark plasma sintering Pasebani, Somayeh; Dutt, Aniket K.; Burns, Jatuporn Materials Science and Engineering: A, Vol. 630 https://doi.org/10.1016/j.msea.2015.01.066	journal	April 2015
Spark Plasma Sintering: Homogenization of the Compact Temperature Field for Non Conductive Materials Vanherck, Thierry; Jean, Guillaume; Gonon, Maurice International Journal of Applied Ceramic Technology, Vol. 12 https://doi.org/10.1111/ijac.12187	journal	November 2013
Reactive gas atomization processing for Fe-based ODS alloys Rieken, J. R.; Anderson, I. E.; Kramer, M. J. Journal of Nuclear Materials, Vol. 428, Issue 1-3, p. 65-75 https://doi.org/10.1016/j.jnucmat.2011.08.015	journal	September 2012
Oxide dispersion-strengthened alloys generated by laser metal deposition of laser-generated nanoparticle-metal powder composites Doñate-Buendía, Carlos; Frömel, Felix; Wilms, Markus B. Materials & Design, Vol. 154 https://doi.org/10.1016/j.matdes.2018.05.044	journal	September 2018
Additive Manufacturing Technologies – Rapid Prototyping to Direct Digital Manufacturing Mueller, Bernhard Assembly Automation, Vol. 32, Issue 2 https://doi.org/10.1108/aa.2012.03332baa.010	journal	April 2012
Metallic additive manufacturing: state-of-the-art review and prospects Vayre, Benjamin; Vignat, Frédéric; Villeneuve, François Mechanics & Industry, Vol. 13, Issue 2 https://doi.org/10.1051/meca/2012003	journal	January 2012
A Review on Binder Jet Additive Manufacturing of 316L Stainless Steel Mirzababaei, Saereh; Pasebani, Somayeh Journal of Manufacturing and Materials Processing, Vol. 3, Issue 3 https://doi.org/10.3390/jmmp3030082	journal	September 2019
Metal Additive Manufacturing: A Review Frazier, William E. Journal of Materials Engineering and Performance, Vol. 23, Issue 6 https://doi.org/10.1007/s11665-014-0958-z	journal	April 2014
Selective laser melting of an Al86Ni6Y4.5Co2La1.5 metallic glass: Processing, microstructure evolution and mechanical properties Li, X. P.; Kang, C. W.; Huang, H. Materials Science and Engineering: A, Vol. 606 https://doi.org/10.1016/j.msea.2014.03.097	journal	June 2014
Additive Manufacturing of Ni-Rich NiTiHf20: Manufacturability, Composition, Density, and Transformation Behavior Nematollahi, M.; Toker, G.; Saghaian, S. E. Shape Memory and Superelasticity, Vol. 5, Issue 1 https://doi.org/10.1007/s40830-019-00214-9	journal	February 2019
Effects of atomizing media and post processing on mechanical properties of 17-4 PH stainless steel manufactured via selective laser melting Pasebani, Somayeh; Ghayoor, Milad; Badwe, Sunil Additive Manufacturing, Vol. 22 https://doi.org/10.1016/j.addma.2018.05.011	journal	August 2018
Application of NiTi in Assistive and Rehabilitation Devices: A Review Nematollahi, Mohammadreza; Baghbaderani, Keyvan Safaei; Amerinatanzi, Amirhesam Bioengineering, Vol. 6, Issue 2 https://doi.org/10.3390/bioengineering6020037	journal	April 2019
Selective laser sintering of MA956 oxide dispersion strengthened steel Hunt, Ryan M.; Kramer, Kevin J.; El-Dasher, Bassem Journal of Nuclear Materials, Vol. 464 https://doi.org/10.1016/j.jnucmat.2015.04.011	journal	September 2015
Mechanical response and deformation mechanisms of ferritic oxide dispersion strengthened steel structures produced by selective laser melting Boegelein, Thomas; Dryepondt, Sebastien N.; Pandey, Amit Acta Materialia, Vol. 87 https://doi.org/10.1016/j.actamat.2014.12.047	journal	April 2015
Fabrication of Fe-Cr-Al Oxide Dispersion Strengthened PM2000 Alloy Using Selective Laser Melting Walker, John C.; Berggreen, Kaj M.; Jones, Andy R. Advanced Engineering Materials, Vol. 11, Issue 7 https://doi.org/10.1002/adem.200800407	journal	July 2009
Selective laser melting of 304L stainless steel: Role of volumetric energy density on the microstructure, texture and mechanical properties Ghayoor, Milad; Lee, Kijoon; He, Yujuan Additive Manufacturing, Vol. 32 https://doi.org/10.1016/j.addma.2019.101011	journal	March 2020
Microstructural observation and tensile properties of ODS-304 austenitic steel Wang, Man; Zhou, Zhangjian; Sun, Hongying Materials Science and Engineering: A, Vol. 559 https://doi.org/10.1016/j.msea.2012.08.099	journal	January 2013
Phase field investigation on cellular tip splitting during directional solidification Wang, Zhijun; Wang, Jincheng; Yang, Gencang Scripta Materialia, Vol. 61, Issue 9 https://doi.org/10.1016/j.scriptamat.2009.07.033	journal	November 2009
Densification behavior, microstructural evolution, and mechanical properties of TiC/316L stainless steel nanocomposites fabricated by selective laser melting AlMangour, Bandar; Grzesiak, Dariusz; Borkar, Tushar Materials & Design, Vol. 138 https://doi.org/10.1016/j.matdes.2017.10.039	journal	January 2018
Strengthening of stainless steel by titanium carbide addition and grain refinement during selective laser melting AlMangour, Bandar; Baek, Min-Seok; Grzesiak, Dariusz Materials Science and Engineering: A, Vol. 712 https://doi.org/10.1016/j.msea.2017.11.126	journal	January 2018
Experimental study on the contact angle formation of solidified iron–chromium droplets onto yttria ceramic substrates for the yttria/ferrous alloy system with variable chromium content Verhiest, K.; Mullens, S.; Paul, J. Ceramics International, Vol. 40, Issue 1 https://doi.org/10.1016/j.ceramint.2013.07.137	journal	January 2014
On the remarkable thermal stability of nanostructured ferritic alloys Cunningham, N.; Wu, Y.; Klingensmith, D. Materials Science and Engineering: A, Vol. 613 https://doi.org/10.1016/j.msea.2014.06.097	journal	September 2014
Effects of annealing temperature on nanoscale particles in oxide dispersion strengthened Fe-15Cr alloy powders with Ti and Zr additions Xu, Haijian; Lu, Zheng; Ukai, Shigeharu Journal of Alloys and Compounds, Vol. 693 https://doi.org/10.1016/j.jallcom.2016.09.133	journal	February 2017
Effects of plastic deformations on microstructure and mechanical properties of ODS-310 austenitic steel Wang, Man; Zhou, Zhangjian; Sun, Hongying Journal of Nuclear Materials, Vol. 430, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2012.07.014	journal	November 2012
Microstructural Observation and Tensile Isotropy of an Austenitic ods Steel Kim, Tae-Kyu; Bae, Chang-Soo; Kim, Do-Hyang Nuclear Engineering and Technology, Vol. 40, Issue 4 https://doi.org/10.5516/NET.2008.40.4.305	journal	June 2008
Laser additive manufacturing of metallic components: materials, processes and mechanisms Gu, D. D.; Meiners, W.; Wissenbach, K. International Materials Reviews, Vol. 57, Issue 3, p. 133-164 https://doi.org/10.1179/1743280411Y.0000000014	journal	May 2012
Rapid fabrication of bulk-form TiB2/316L stainless steel nanocomposites with novel reinforcement architecture and improved performance by selective laser melting AlMangour, Bandar; Grzesiak, Dariusz; Yang, Jenn-Ming Journal of Alloys and Compounds, Vol. 680 https://doi.org/10.1016/j.jallcom.2016.04.156	journal	September 2016
Selective laser melting of nano-TiB 2 decorated AlSi10Mg alloy with high fracture strength and ductility Li, X. P.; Ji, G.; Chen, Z. Acta Materialia, Vol. 129 https://doi.org/10.1016/j.actamat.2017.02.062	journal	May 2017
Structure, morphology and optical properties of nanocrystalline yttrium oxide (Y2O3) thin films Mudavakkat, V. H.; Atuchin, V. V.; Kruchinin, V. N. Optical Materials, Vol. 34, Issue 5 https://doi.org/10.1016/j.optmat.2011.11.027	journal	March 2012
Calculation of laser absorption by metal powders in additive manufacturing Boley, C. D.; Khairallah, S. A.; Rubenchik, A. M. Applied Optics, Vol. 54, Issue 9 https://doi.org/10.1364/AO.54.002477	journal	January 2015
Selective laser melting of TiC/Ti bulk nanocomposites: Influence of nanoscale reinforcement Gu, Dongdong; Meng, Guangbin; Li, Chuang Scripta Materialia, Vol. 67, Issue 2 https://doi.org/10.1016/j.scriptamat.2012.04.013	journal	July 2012
Effects of laser sintering processing parameters on the microstructure and densification of iron powder Simchi, A.; Pohl, H. Materials Science and Engineering: A, Vol. 359, Issue 1-2 https://doi.org/10.1016/S0921-5093(03)00341-1	journal	October 2003
Behavior of ceramic particles at the solid- liquid metal interface in metal matrix composites Stefanescu, D. M.; Dhindaw, B. K.; Kacar, S. A. Metallurgical Transactions A, Vol. 19, Issue 11 https://doi.org/10.1007/BF02645819	journal	November 1988
In-situ characterization of laser-powder interaction and cooling rates through high-speed imaging of powder bed fusion additive manufacturing Scipioni Bertoli, Umberto; Guss, Gabe; Wu, Sheldon Materials & Design, Vol. 135 https://doi.org/10.1016/j.matdes.2017.09.044	journal	December 2017
Effects of nonstoichiometry in the melting process of $Y_{2} O_{3}$ from molecular dynamics simulations Álvarez, Luis Javier; San Miguel, Miguel Angel; Odriozola, José Antonio Physical Review B, Vol. 59, Issue 17 https://doi.org/10.1103/PhysRevB.59.11303	journal	May 1999
O-Y (Oxygen-Yttrium) Okamoto, H. Journal of Phase Equilibria and Diffusion, Vol. 32, Issue 6 https://doi.org/10.1007/s11669-011-9956-0	journal	September 2011
Modeling temperature and residual stress fields in selective laser melting Li, Yingli; Zhou, Kun; Tan, Pengfei International Journal of Mechanical Sciences, Vol. 136 https://doi.org/10.1016/j.ijmecsci.2017.12.001	journal	February 2018
Physical and electrical characterization of ultrathin yttrium silicate insulators on silicon Chambers, J. J.; Parsons, G. N. Journal of Applied Physics, Vol. 90, Issue 2 https://doi.org/10.1063/1.1375018	journal	July 2001
Processing and properties of magnesium containing a dense uniform dispersion of nanoparticles Chen, Lian-Yi; Xu, Jia-Quan; Choi, Hongseok Nature, Vol. 528, Issue 7583 https://doi.org/10.1038/nature16445	journal	December 2015
Hall–Petch Behavior in Ultra-Fine-Grained AISI 301LN Stainless Steel Rajasekhara, S.; Ferreira, P. J.; Karjalainen, L. P. Metallurgical and Materials Transactions A, Vol. 38, Issue 6 https://doi.org/10.1007/s11661-007-9143-4	journal	June 2007
The dislocation distribution, flow stress, and stored energy in cold-worked polycrystalline silver Bailey, J. E.; Hirsch, P. B. Philosophical Magazine, Vol. 5, Issue 53 https://doi.org/10.1080/14786436008238300	journal	May 1960
Intrinsic size effects in plasticity by dislocation glide Gil Sevillano, J.; Ocaña Arizcorreta, I.; Kubin, L. P. Materials Science and Engineering: A, Vol. 309-310 https://doi.org/10.1016/S0921-5093(00)01733-0	journal	July 2001
Hall–Petch relation and boundary strengthening Hansen, Niels Scripta Materialia, Vol. 51, Issue 8 https://doi.org/10.1016/j.scriptamat.2004.06.002	journal	October 2004
Effect of scanning strategy on mechanical properties of selective laser melted Inconel 718 Wan, H. Y.; Zhou, Z. J.; Li, C. P. Materials Science and Engineering: A, Vol. 753 https://doi.org/10.1016/j.msea.2019.03.007	journal	April 2019
On the role of alloy composition and processing parameters in nanocluster formation and dispersion strengthening in nanostuctured ferritic alloys Alinger, M. J.; Odette, G. R.; Hoelzer, D. T. Acta Materialia, Vol. 57, Issue 2 https://doi.org/10.1016/j.actamat.2008.09.025	journal	January 2009
Effects of scandium and hafnium solute additions on microstructure thermal stability in nanostructured ferritic alloys Pasebani, Somayeh; Samimi, Peyman; Saber, Mostafa Materials Characterization, Vol. 151 https://doi.org/10.1016/j.matchar.2019.02.037	journal	May 2019
Strategies for Improving Tensile Ductility of Bulk Nanostructured Materials Zhao, Yonghao; Zhu, Yuntian; Lavernia, Enrique J. Advanced Engineering Materials, Vol. 12, Issue 8 https://doi.org/10.1002/adem.200900335	journal	May 2010
Nanostructured aluminium alloys produced by severe plastic deformation: New horizons in development Sabirov, I.; Murashkin, M. Yu.; Valiev, R. Z. Materials Science and Engineering: A, Vol. 560 https://doi.org/10.1016/j.msea.2012.09.020	journal	January 2013
Eight routes to improve the tensile ductility of bulk nanostructured metals and alloys Ma, E. JOM, Vol. 58, Issue 4 https://doi.org/10.1007/s11837-006-0215-5	journal	April 2006
High tensile ductility in a nanostructured metal Wang, Yinmin; Chen, Mingwei; Zhou, Fenghua Nature, Vol. 419, Issue 6910 https://doi.org/10.1038/nature01133	journal	October 2002

Similar Records

Selective laser melting of austenitic oxide dispersion strengthened steel: Processing, microstructural evolution and strengthening mechanisms

Journal Article · Sat May 16 00:00:00 EDT 2020 · Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing · OSTI ID:1799396

Ghayoor, Milad; Lee, Kijoon; He, Yujuan; +3 more

Mechanical response and deformation mechanisms of ferritic oxide dispersion strengthened steel structures produced by selective laser melting

Journal Article · Wed Jan 28 00:00:00 EST 2015 · Acta Materialia · OSTI ID:1799396

Boegelein, Thomas; Dryepondt, Sebastien N.; Pandey, Amit; +2 more

Mechanical response and deformation mechanisms of ferritic oxide dispersion strengthened steel structures produced by selective laser melting

Journal Article · Wed Apr 01 00:00:00 EDT 2015 · Acta Materialia · OSTI ID:1799396

Boegelein, Thomas; Dryepondt, Sebastien N.; Pandey, Amit; +2 more

Related Subjects

Science & Technology - Other Topics
Materials Science
Metallurgy & Metallurgical Engineering

Title: Selective laser melting of austenitic oxide dispersion strengthened steel: Processing, microstructural evolution and strengthening mechanisms

Citation Formats

References (63)

Similar Records

Related Subjects