Relationships Between the Phase Transformation Kinetics, Texture Evolution, and Microstructure Development in a 304L Stainless Steel Under Biaxial Loading Conditions: Synchrotron X-ray and Electron Backscatter Diffraction Studies
Abstract
Here we report that the relationships between the martensitic phase transformation kinetics, texture evolution, and the microstructure development in the parent austenite phase were studied for a 304L stainless steel that exhibits the transformation-induced plasticity effect under biaxial loading conditions at ambient temperature. The applied loading paths included: pure torsion, simultaneous biaxial torsion/tension, simultaneous biaxial torsion/compression, and stepwise loading of tension followed by torsion (i.e., first loading by uniaxial tension and then by pure torsion in sequence). Synchrotron X-ray and electron backscatter diffraction techniques were used to measure the evolution of the phase fractions, textures, and microstructures as a function of the applied strains. The influence of loading character and path on the changes in martensitic phase transformation kinetics is discussed in the context of (1) texture-transformation relationship and the preferred transformation of grains belonging to certain texture components over the others, (2) effects of axial strains on shear band evolutions, and (3) volume changes associated with martensitic transformation.
- Authors:
-
- Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
- Univ. of Tennessee, Knoxville, TN (United States)
- Korea Inst. of Materials Science, Changwondaero, Changwon (South Korea)
- Argonne National Lab. (ANL), Argonne, IL (United States)
- Publication Date:
- Research Org.:
- Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States). Spallation Neutron Source (SNS)
- Sponsoring Org.:
- USDOE Office of Science (SC), Basic Energy Sciences (BES)
- OSTI Identifier:
- 1265423
- Grant/Contract Number:
- AC05-00OR22725
- Resource Type:
- Accepted Manuscript
- Journal Name:
- Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science
- Additional Journal Information:
- Journal Volume: 46; Journal Issue: 5; Journal ID: ISSN 1073-5623
- Publisher:
- ASM International
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 36 MATERIALS SCIENCE
Citation Formats
Cakmak, Ercan, Choo, Hahn, Kang, Jun-Yun, and Ren, Yang. Relationships Between the Phase Transformation Kinetics, Texture Evolution, and Microstructure Development in a 304L Stainless Steel Under Biaxial Loading Conditions: Synchrotron X-ray and Electron Backscatter Diffraction Studies. United States: N. p., 2015.
Web. doi:10.1007/s11661-015-2772-0.
Cakmak, Ercan, Choo, Hahn, Kang, Jun-Yun, & Ren, Yang. Relationships Between the Phase Transformation Kinetics, Texture Evolution, and Microstructure Development in a 304L Stainless Steel Under Biaxial Loading Conditions: Synchrotron X-ray and Electron Backscatter Diffraction Studies. United States. https://doi.org/10.1007/s11661-015-2772-0
Cakmak, Ercan, Choo, Hahn, Kang, Jun-Yun, and Ren, Yang. Wed .
"Relationships Between the Phase Transformation Kinetics, Texture Evolution, and Microstructure Development in a 304L Stainless Steel Under Biaxial Loading Conditions: Synchrotron X-ray and Electron Backscatter Diffraction Studies". United States. https://doi.org/10.1007/s11661-015-2772-0. https://www.osti.gov/servlets/purl/1265423.
@article{osti_1265423,
title = {Relationships Between the Phase Transformation Kinetics, Texture Evolution, and Microstructure Development in a 304L Stainless Steel Under Biaxial Loading Conditions: Synchrotron X-ray and Electron Backscatter Diffraction Studies},
author = {Cakmak, Ercan and Choo, Hahn and Kang, Jun-Yun and Ren, Yang},
abstractNote = {Here we report that the relationships between the martensitic phase transformation kinetics, texture evolution, and the microstructure development in the parent austenite phase were studied for a 304L stainless steel that exhibits the transformation-induced plasticity effect under biaxial loading conditions at ambient temperature. The applied loading paths included: pure torsion, simultaneous biaxial torsion/tension, simultaneous biaxial torsion/compression, and stepwise loading of tension followed by torsion (i.e., first loading by uniaxial tension and then by pure torsion in sequence). Synchrotron X-ray and electron backscatter diffraction techniques were used to measure the evolution of the phase fractions, textures, and microstructures as a function of the applied strains. The influence of loading character and path on the changes in martensitic phase transformation kinetics is discussed in the context of (1) texture-transformation relationship and the preferred transformation of grains belonging to certain texture components over the others, (2) effects of axial strains on shear band evolutions, and (3) volume changes associated with martensitic transformation.},
doi = {10.1007/s11661-015-2772-0},
journal = {Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science},
number = 5,
volume = 46,
place = {United States},
year = {Wed Feb 11 00:00:00 EST 2015},
month = {Wed Feb 11 00:00:00 EST 2015}
}
Free Publicly Available Full Text
Publisher's Version of Record
Other availability
Search WorldCat to find libraries that may hold this journal
Cited by: 9 works
Citation information provided by
Web of Science
Web of Science
Save to My Library
You must Sign In or Create an Account in order to save documents to your library.
Works referenced in this record:
Effects of Strain State and Strain Rate on Deformation-Induced Transformation in 304 Stainless Steel: Part II. Microstructural Study
journal, April 1982
- Murr, L. E.; Staudhammer, K. P.; Hecker, S. S.
- Metallurgical Transactions A, Vol. 13, Issue 4
Stepwise transformation behavior of the strain-induced martensitic transformation in a metastable stainless steel
journal, February 2007
- Hedström, Peter; Lienert, Ulrich; Almer, Jon
- Scripta Materialia, Vol. 56, Issue 3
Effects of Strain State and Strain Rate on Deformation-Induced Transformation in 304 Stainless Steel: Part I. Magnetic Measurements and Mechanical Behavior
journal, April 1982
- Hecker, S. S.; Stout, M. G.; Staudhammer, K. P.
- Metallurgical Transactions A, Vol. 13, Issue 4
Modelling oriented nucleation and selective growth during dynamic recrystallization
journal, December 1992
- Jonas, J. J.; Tóth, L. S.
- Scripta Metallurgica et Materialia, Vol. 27, Issue 11
Neutron-diffraction study of stress-induced martensitic transformation in TRIP steel
journal, December 2002
- Oliver, E. C.; Withers, P. J.; Daymond, M. R.
- Applied Physics A: Materials Science & Processing, Vol. 74, Issue 0
Tensile Behavior of a TRIP-aided Ultra-fine Grained Steel Studied by Neutron Diffraction
journal, January 2011
- Asoo, Kazuya; Tomota, Yo; Harjo, Stefanus
- ISIJ International, Vol. 51, Issue 1
Deformation behavior and microstructure/texture evolution of an annealed 304 AISI stainless steel sheet. Experimental and micromechanical modeling
journal, February 2007
- Petit, B.; Gey, N.; Cherkaoui, M.
- International Journal of Plasticity, Vol. 23, Issue 2
Effect of strain rate on stress-strain behavior of alloy 309 and 304L austenitic stainless steel
journal, January 2006
- Lichtenfeld, Joshua A.; Van Tyne, Chester J.; Mataya, Martin C.
- Metallurgical and Materials Transactions A, Vol. 37, Issue 1
Kinetics of strain-induced martensitic nucleation
journal, April 1975
- Olson, G. B.; Cohen, Morris
- Metallurgical Transactions A, Vol. 6, Issue 4
Texture development during the torsion testing of α-iron and two IF steels
journal, November 1996
- Baczynski, J.; Jonas, J. J.
- Acta Materialia, Vol. 44, Issue 11
An assessment of the contributing factors to the superior properties of a nanostructured steel using in situ high-energy X-ray diffraction
journal, April 2010
- Cheng, S.; Wang, Y. D.; Choo, H.
- Acta Materialia, Vol. 58, Issue 7
Computational simulation of the dependence of the austenitic grain size on the deformation behavior of TRIP steels
journal, June 2000
- Iwamoto, Takeshi; Tsuta, Toshio
- International Journal of Plasticity, Vol. 16, Issue 7-8
3D Mapping of Crystallographic Phase Distribution using Energy-Selective Neutron Tomography
journal, April 2014
- Woracek, Robin; Penumadu, Dayakar; Kardjilov, Nikolay
- Advanced Materials, Vol. 26, Issue 24
Experimental investigation on martensitic transformation and fracture morphologies of austenitic stainless steel
journal, November 2009
- Das, Arpan; Tarafder, Soumitra
- International Journal of Plasticity, Vol. 25, Issue 11
Radial distribution of martensitic phase transformation in a metastable stainless steel under torsional deformation: A synchrotron X-ray diffraction study
journal, October 2011
- Cakmak, Ercan; Choo, Hahn; An, Ke
- Materials Letters, Vol. 65, Issue 19-20
Axial stresses and texture development during the torsion testing of Al, Cu and α-Fe
journal, November 1984
- Montheillet, F.; Cohen, M.; Jonas, J. J.
- Acta Metallurgica, Vol. 32, Issue 11
Texture Analysis with MTEX – Free and Open Source Software Toolbox
journal, February 2010
- Bachmann, F.; Hielscher, Ralf; Schaeben, Helmut
- Solid State Phenomena, Vol. 160
Transformation Textures in Steels.
journal, January 1994
- Ray, R. K.; Jonas, J. J.; Butrón-Guillén, M. P.
- ISIJ International, Vol. 34, Issue 12
Transformation textures in steels
journal, January 1990
- Ray, R. K.; Jonas, J. J.
- International Materials Reviews, Vol. 35, Issue 1
Transformation-induced plasticity in an ultrafine-grained steel: An in situ neutron diffraction study
journal, March 2007
- Tao, Kaixiang; Choo, Hahn; Li, Hongqi
- Applied Physics Letters, Vol. 90, Issue 10
The Effect of Stress-State on the Large Strain Inelastic Deformation Behavior of 304L Stainless Steel
journal, January 1996
- Miller, M. P.; McDowell, D. L.
- Journal of Engineering Materials and Technology, Vol. 118, Issue 1
Theory of torsion texture development
journal, February 1984
- Canova, G. R.; Kocks, U. F.; Jonas, J. J.
- Acta Metallurgica, Vol. 32, Issue 2
EBSD characterization of dynamic shear band regions in pre-shocked and as-received 304 stainless steels
journal, January 2008
- Xue, Q.; Bingert, J. F.; Henrie, B. L.
- Materials Science and Engineering: A, Vol. 473, Issue 1-2
Relation between martensite morphology and volume change accompanying fcc to bcc martensitic transformation in Fe–Ni–Co alloys
journal, November 2006
- Shibata, A.; Yonezawa, H.; Yabuuchi, K.
- Materials Science and Engineering: A, Vol. 438-440
The martensite transformation in stainless steel
journal, January 1962
- Venables, J. A.
- The Philosophical Magazine: A Journal of Theoretical Experimental and Applied Physics, Vol. 7, Issue 73
Influence of phase transformations on the mechanical properties of austenitic stainless steels
journal, June 2000
- Lebedev, A. A.; Kosarchuk, V. V.
- International Journal of Plasticity, Vol. 16, Issue 7-8
Influence of stress state and strain path on deformation induced martensitic transformations
journal, May 2008
- Perdahcıoğlu, E. S.; Geijselaers, H. J. M.; Huétink, J.
- Materials Science and Engineering: A, Vol. 481-482
Probing the Characteristic Deformation Behaviors of Transformation-Induced Plasticity Steels
journal, August 2008
- Cheng, Sheng; Wang, Xun-Li; Feng, Zhili
- Metallurgical and Materials Transactions A, Vol. 39, Issue 13
A synchrotron X-ray diffraction study on the phase transformation kinetics and texture evolution of a TRIP steel subjected to torsional loading
journal, November 2012
- Cakmak, Ercan; Choo, Hahn; An, Ke
- Acta Materialia, Vol. 60, Issue 19
Strengthening via the formation of strain-induced martensite in stainless steels
journal, December 2004
- Spencer, K.; Embury, J. D.; Conlon, K. T.
- Materials Science and Engineering: A, Vol. 387-389
High-energy X-ray diffraction study on the temperature-dependent mechanical stability of retained austenite in low-alloyed TRIP steels
journal, January 2012
- Blondé, R.; Jimenez-Melero, E.; Zhao, L.
- Acta Materialia, Vol. 60, Issue 2
Effect of martensitic phase transformation on the hardening behavior and texture evolution in a 304L stainless steel under compression at liquid nitrogen temperature
journal, January 2014
- Cakmak, Ercan; Vogel, Sven C.; Choo, Hahn
- Materials Science and Engineering: A, Vol. 589
Texture evolution during strain-induced martensitic phase transformation in 304L stainless steel at a cryogenic temperature
journal, December 2006
- Tao, Kaixiang; Brown, Donald W.; Vogel, Sven C.
- Metallurgical and Materials Transactions A, Vol. 37, Issue 12
Criterion for the action of applied stress in the martensitic transformation
journal, September 1953
- Patel, J. R.; Cohen, M.
- Acta Metallurgica, Vol. 1, Issue 5
Investigation on deformation mode dependence of strain-induced martensitic transformation in trip steels and modelling of transformation kinetics
journal, February 1998
- Iwamoto, Takeshi; Tsuta, Toshio; Tomita, Yoshihiro
- International Journal of Mechanical Sciences, Vol. 40, Issue 2-3
Tensile behavior of TRIP-aided multi-phase steels studied by in situ neutron diffraction
journal, December 2004
- Tomota, Y.; Tokuda, H.; Adachi, Y.
- Acta Materialia, Vol. 52, Issue 20
Martensite formation, strain rate sensitivity, and deformation behavior of type 304 stainless steel sheet
journal, July 1989
- Huang, G. L.; Matlock, Dk.; Krauss, G.
- Metallurgical Transactions A, Vol. 20, Issue 7
Constitutive modelling and identification of parameters of the plastic strain-induced martensitic transformation in 316L stainless steel at cryogenic temperatures
journal, July 2006
- Garion, Cédric; Skoczeń, Błażej; Sgobba, Stefano
- International Journal of Plasticity, Vol. 22, Issue 7
Relation between axial stresses and texture development during torsion testing: A simplified theory
journal, April 1985
- Montheillet, F.; Gilormini, P.; Jonas, J. J.
- Acta Metallurgica, Vol. 33, Issue 4
Dislocation structure and work hardening in polycrystalline ofhc copper rods deformed by torsion and tension
journal, July 1986
- Ungár, T.; Tóth, L. S.; Illy, J.
- Acta Metallurgica, Vol. 34, Issue 7
An in situ high-energy X-ray diffraction study of micromechanical behavior of multiple phases in advanced high-strength steels
journal, August 2009
- Jia, N.; Cong, Z. H.; Sun, X.
- Acta Materialia, Vol. 57, Issue 13
Combined texture and structure analysis of deformed limestone from time-of-flight neutron diffraction spectra
journal, January 1997
- Lutterotti, L.; Matthies, S.; Wenk, H. -R.
- Journal of Applied Physics, Vol. 81, Issue 2
A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: Application to zirconium alloys
journal, September 1993
- Lebensohn, R. A.; Tomé, C. N.
- Acta Metallurgica et Materialia, Vol. 41, Issue 9
Stacking faults and f.c.c. (γ) → h.c.p. (ϵ) transformation in -type stainless steel
journal, May 1972
- Fujita, H.; Ueda, S.
- Acta Metallurgica, Vol. 20, Issue 5