Utah FORGE 3-2418: Wellbore Fracture Imaging Using Inflow Detection - 2024 Annual Workshop Presentation

Horne, Roland; Schneider, Melanie

doi:10.15121/2440873

Title: Utah FORGE 3-2418: Wellbore Fracture Imaging Using Inflow Detection - 2024 Annual Workshop Presentation

Dataset
Other Related Research

Abstract

This is a presentation on the Wellbore Fracture Imaging Using Inflow Detection by Stanford University and Sandia National Laboratory, presented by Roland Horde. This is a video presentation on wells, both before and after stimulation, using chloride or other ions to map fractures and estimate their flow magnitudes. This research is being done by Stanford University. This presentation was featured in the Utah FORGE R&D Annual Workshop on August 13, 2024.

Authors:

Horne, Roland; Schneider, Melanie

Energy and Geoscience Institute at the University of Utah

Publication Date:: Fri Sep 13 00:00:00 EDT 2024

Other Number(s):: 1649

DOE Contract Number:: EE0007080

Research Org.:: DOE Geothermal Data Repository; Energy and Geoscience Institute at the University of Utah

Sponsoring Org.:: USDOE Office of Energy Efficiency and Renewable Energy (EERE), Renewable Power Office. Geothermal Technologies Program (EE-4G)

Collaborations:: Energy and Geoscience Institute at the University of Utah

Subject:: 15 GEOTHERMAL ENERGY; EGS; Stanford; Stanford University; Utah FORGE; chloride; chloride concentration; energy; flow magnitudes; fracing; fracture network; fractures; geothermal; ion concetration; presentation; sewer cam; stimulation; video

OSTI Identifier:: 2440873

DOI:: https://doi.org/10.15121/2440873

Citation Formats


                    Horne, Roland, and Schneider, Melanie. Utah FORGE 3-2418: Wellbore Fracture Imaging Using Inflow Detection - 2024 Annual Workshop Presentation.  United States: N. p., 2024. 
        Web.  doi:10.15121/2440873.

Copy to clipboard


                    Horne, Roland, & Schneider, Melanie. Utah FORGE 3-2418: Wellbore Fracture Imaging Using Inflow Detection - 2024 Annual Workshop Presentation.  United States.  doi:https://doi.org/10.15121/2440873

Copy to clipboard


                    Horne, Roland, and Schneider, Melanie. 2024.  
"Utah FORGE 3-2418: Wellbore Fracture Imaging Using Inflow Detection - 2024 Annual Workshop Presentation".  United States.  doi:https://doi.org/10.15121/2440873.  https://www.osti.gov/servlets/purl/2440873. Pub date:Fri Sep 13 00:00:00 EDT 2024

Copy to clipboard


                    
@article{osti_2440873,

  title        = {Utah FORGE 3-2418: Wellbore Fracture Imaging Using Inflow Detection - 2024 Annual Workshop Presentation},

  author       = {Horne, Roland and Schneider, Melanie},

  abstractNote = {This is a presentation on the Wellbore Fracture Imaging Using Inflow Detection by Stanford University and Sandia National Laboratory, presented by Roland Horde. This is a video presentation on wells, both before and after stimulation, using chloride or other ions to map fractures and estimate their flow magnitudes. This research is being done by Stanford University. This presentation was featured in the Utah FORGE R&D Annual Workshop on August 13, 2024.},

  doi          = {10.15121/2440873},

  journal      = {},

  number       = ,

  volume       = ,

  place        = {United States},

  year         = {Fri Sep 13 00:00:00 EDT 2024},

  month        = {Fri Sep 13 00:00:00 EDT 2024}

}

Copy to clipboard

Dataset:

View Dataset

DOI: https://doi.org/10.15121/2440873

Save / Share:

Export Metadata

Save to My Library

Similar records in DOE Data Explorer and OSTI.GOV collections:

Utah FORGE 3-2418: Wellbore Fracture Imaging Using Inflow Detection Measurements - Workshop Presentation

Dataset Horne, Roland ; Su, Jiann-Cherng

This is a presentation on the Wellbore Fracture Imaging Using Inflow Detection Measurements project by Stanford University, presented by Dr. Roland N. Horne. The project's objective was to make measurements in the Utah FORGE wells, both before and after fracturing experiments, to map the fractures and estimate their flow magnitude. The approach utilizes a ion-specific electrode that will measure chloride in the well. The idea is that water flowing into the well from the fractures will have a different concentration of chloride than the surrounding water. This presentation was featured in the Utah FORGE R&D Annual Workshop on September 8,more »« less
Utah FORGE 1-2551: Development of a Multi-Stage Fracturing System and Wellbore Tractor - 2024 Annual Workshop Presentation

Dataset Fleckenstein, William

This is a presentation on the Development of a Multi-Stage Fracturing System and Wellbore Tractor by Colorado School of Mines, presented by William Fleckenstein. This video describes (1) the development and use of a low-cost and rapid multistage fracture stimulation technology with cemented casing frac sleeves that eliminates packers used in both conventional stimulation and injection flow control and (2) the development of devices to effectively detect and control flow of heat-carrier fluid solely from a long-reach injector through the network of induced and existing fractures and produced from an open-hole long-reach well to improve heat recovery. This presentation wasmore »« less
Utah FORGE 3-2535: Joint Imaging of Fracture Growth and Estimation of Fracture Properties During EGS Development - 2024 Annual Workshop Presentation

Dataset Alumbaugh, David

This is a presentation on the Joint Electromagnetic/Seismic/InSAR Imaging of Spatial-Temporal Fracture Growth and Estimation of Physical Fracture Properties During EGS Resource Development by Lawrence Berkeley National Laboratory, presented by David Alumbaugh. This is a video presentation on developing a set of technologies and workflow to image induced fracture generation and growth for an Enhanced Geothermal System (EGS). Using a combination of passive seismic and active source borehole EM and InSAR technology it is anticipated imaging and fracture generation and growth monitoring will be actualized. The workflow will provide a template for imaging induced fracture systems for future EGS systems.more »« less
Utah FORGE 3-2535: Joint EM-Seismic-InSAR Imaging of Fracture Properties - Workshop Presentation

Dataset Alumbaugh, David

This is a presentation on the Joint Electromagnetic/Seismic/InSAR Imaging of Spatial-Temporal Fracture Growth and Estimation of Physical Fracture Properties During EGS Resource Development project by Lawrence Berkeley National Laboratory, presented by Dr. David Alumbaugh, Staff Scientist. The project's objective was to develop a set of technologies and workflow to image induced fracture generation and growth for an Enhanced Geothermal System (EGS). The project anticipates imaging of the fracture generation and growth at FORGE using a combination of passive seismic, active source borehole EM, and INSAR technology. This presentation was featured in the Utah FORGE R&D Annual Workshop on September 8,more »« less
Utah FORGE 3-2514: Strain Sensing Array for Deformation Characterization - 2024 Annual Workshop Presentation

Dataset Murdoch, Larry ; Germanovich, Leonid ; DeWolf, Scott ; ...

This is a presentation on the Strain Sensing Array to characterize deformation at the FORGE site project by Clemson University, presented by Lawrence Murdoch. The project's objective was to evaluate the feasibility of measuring and interpreting tensor strain data to improve the performance of EGS. This presentation was featured in the Utah FORGE R&D Annual Workshop on August 23, 2024.

Similar Records