Utah FORGE 1-2551: Development of a Multi-Stage Fracturing System and Wellbore Tractor - 2024 Annual Workshop Presentation

Fleckenstein, William

doi:10.15121/2439576

Title: Utah FORGE 1-2551: Development of a Multi-Stage Fracturing System and Wellbore Tractor - 2024 Annual Workshop Presentation

Dataset
Other Related Research

Abstract

This is a presentation on the Development of a Multi-Stage Fracturing System and Wellbore Tractor by Colorado School of Mines, presented by William Fleckenstein. This video describes (1) the development and use of a low-cost and rapid multistage fracture stimulation technology with cemented casing frac sleeves that eliminates packers used in both conventional stimulation and injection flow control and (2) the development of devices to effectively detect and control flow of heat-carrier fluid solely from a long-reach injector through the network of induced and existing fractures and produced from an open-hole long-reach well to improve heat recovery. This presentation was featured in the Utah FORGE R&D Annual Workshop on August 23, 2024.

Authors:

Fleckenstein, William

Energy and Geoscience Institute at the University of Utah

Publication Date:: Tue Jan 13 04:00:00 UTC 1970

Other Number(s):: 1631

DOE Contract Number:: EE0007080

Research Org.:: DOE Geothermal Data Repository; Energy and Geoscience Institute at the University of Utah

Sponsoring Org.:: USDOE Office of Energy Efficiency and Renewable Energy (EERE), Renewable Power Office. Geothermal Technologies Program (EE-4G)

Collaborations:: Energy and Geoscience Institute at the University of Utah

Subject:: 15 GEOTHERMAL ENERGY; Colorado School of Mines; EGS; Utah FORGE; energy; flow control; fracing; fracture stimulation; geothermal; heat recovery improvement; multistate fracture stimulation; packer elimination; welbore tractor; well stimulation

OSTI Identifier:: 2439576

DOI:: https://doi.org/10.15121/2439576

Citation Formats


                    Fleckenstein, William. Utah FORGE 1-2551: Development of a Multi-Stage Fracturing System and Wellbore Tractor - 2024 Annual Workshop Presentation.  United States: N. p., 1970. 
        Web.  doi:10.15121/2439576.

Copy to clipboard


                    Fleckenstein, William. Utah FORGE 1-2551: Development of a Multi-Stage Fracturing System and Wellbore Tractor - 2024 Annual Workshop Presentation.  United States.  doi:https://doi.org/10.15121/2439576

Copy to clipboard


                    Fleckenstein, William. 1970.  
"Utah FORGE 1-2551: Development of a Multi-Stage Fracturing System and Wellbore Tractor - 2024 Annual Workshop Presentation".  United States.  doi:https://doi.org/10.15121/2439576.  https://www.osti.gov/servlets/purl/2439576. Pub date:Tue Jan 13 04:00:00 UTC 1970

Copy to clipboard


                    
@article{osti_2439576,

  title        = {Utah FORGE 1-2551: Development of a Multi-Stage Fracturing System and Wellbore Tractor - 2024 Annual Workshop Presentation},

  author       = {Fleckenstein, William},

  abstractNote = {This is a presentation on the Development of a Multi-Stage Fracturing System and Wellbore Tractor by Colorado School of Mines, presented by William Fleckenstein. This video describes (1) the development and use of a low-cost and rapid multistage fracture stimulation technology with cemented casing frac sleeves that eliminates packers used in both conventional stimulation and injection flow control and (2) the development of devices to effectively detect and control flow of heat-carrier fluid solely from a long-reach injector through the network of induced and existing fractures and produced from an open-hole long-reach well to improve heat recovery. This presentation was featured in the Utah FORGE R&D Annual Workshop on August 23, 2024.},

  doi          = {10.15121/2439576},

  journal      = {},

  number       = ,

  volume       = ,

  place        = {United States},

  year         = {Tue Jan 13 04:00:00 UTC 1970},

  month        = {Tue Jan 13 04:00:00 UTC 1970}

}

Copy to clipboard

Dataset:

View Dataset

DOI: https://doi.org/10.15121/2439576

Save / Share:

Export Metadata

Save to My Library

Similar records in DOE Data Explorer and OSTI.GOV collections:

Utah FORGE 1-2551: Multi-Stage Fracturing System and Well Tractor to Enable Zonal Isolation During Stimulation and EGS Operations in Horizontal Wellbores - Workshop Presentation and Report

Dataset Fleckenstein, William ; Mailand, Jason ; King, George

Included here are a presentation recording, slides, and report on the Multi-Stage Fracturing System and Well Tractor to Enable Zonal Isolation During Stimulation and EGS Operations in Horizontal Wellbores project by Colorado School of Mines, presented by Dr. William W. Fleckenstein. One goal of the project is to develop and demonstrate the use of low-cost, rapid multistage fracture stimulation technology with cemented casing frac sleeves that eliminates packers used in both conventional stimulation and injection flow control. The second goal is to develop and demonstrate the devices to effectively detect and control the flow of heat-carrier fluid solely from amore »« less
Utah FORGE 3-2418: Wellbore Fracture Imaging Using Inflow Detection - 2024 Annual Workshop Presentation

Dataset Horne, Roland ; Schneider, Melanie

This is a presentation on the Wellbore Fracture Imaging Using Inflow Detection by Stanford University and Sandia National Laboratory, presented by Roland Horde. This is a video presentation on wells, both before and after stimulation, using chloride or other ions to map fractures and estimate their flow magnitudes. This research is being done by Stanford University. This presentation was featured in the Utah FORGE R&D Annual Workshop on August 13, 2024.
Utah FORGE 1-2410: Development of a Smart Completion and Stimulation Solution - 2024 Annual Workshop Presentation

Dataset Esquitin, Yosafat ; Vasques, Ricardo ; Teodoriu, Catalin

This is a presentation on the Development of a Smart Completion & Stimulation Solution by Welltec, presented by Ricardo Vasques. This video slide presentation discusses the development of an (1) annular isolation system, (2) a stimulation isolation system, and (3) a multi open-close flow system for geothermal environments. This presentation was featured in the Utah FORGE R&D Annual Workshop on August 15, 2024.
Utah FORGE 3-2418: Wellbore Fracture Imaging Using Inflow Detection Measurements - Workshop Presentation

Dataset Horne, Roland ; Su, Jiann-Cherng

This is a presentation on the Wellbore Fracture Imaging Using Inflow Detection Measurements project by Stanford University, presented by Dr. Roland N. Horne. The project's objective was to make measurements in the Utah FORGE wells, both before and after fracturing experiments, to map the fractures and estimate their flow magnitude. The approach utilizes a ion-specific electrode that will measure chloride in the well. The idea is that water flowing into the well from the fractures will have a different concentration of chloride than the surrounding water. This presentation was featured in the Utah FORGE R&D Annual Workshop on September 8,more »« less
Utah FORGE 3-2535: Joint Imaging of Fracture Growth and Estimation of Fracture Properties During EGS Development - 2024 Annual Workshop Presentation

Dataset Alumbaugh, David

This is a presentation on the Joint Electromagnetic/Seismic/InSAR Imaging of Spatial-Temporal Fracture Growth and Estimation of Physical Fracture Properties During EGS Resource Development by Lawrence Berkeley National Laboratory, presented by David Alumbaugh. This is a video presentation on developing a set of technologies and workflow to image induced fracture generation and growth for an Enhanced Geothermal System (EGS). Using a combination of passive seismic and active source borehole EM and InSAR technology it is anticipated imaging and fracture generation and growth monitoring will be actualized. The workflow will provide a template for imaging induced fracture systems for future EGS systems.more »« less

Similar Records