skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Biases in Ion Transmission Through an Electrospray Ionization-Mass Spectrometry Capillary Inlet

Journal Article · · Journal of the American Society for Mass Spectrometry, 20(12):2265-2272

The standard heated capillary inlet of an electrospray ionization mass spectrometry (ESI-MS) interface was compared with shorter versions of the inlet to determine the effects on transmission and ionization efficiencies for low-flow electrosprays. The primary finding of the study was a large bias towards higher mobility species in the electrospray current losses to the inside walls of the inlet. The transmission efficiency increased with decreasing capillary length due to reduced losses along the capillary. A decrease in transmission efficiency was also confirmed for electrosprays of higher conductivity solvents. A direct correlation between mass spectrometry sensitivity and the transmitted electrospray current was not observed as some analytes showed little to no increase in sensitivity while others showed as high as a 15 – fold increase. The variation was shown to at least be partially dependent on the analytes’ mobilities. Higher mobility analytes demonstrated a larger increase in sensitivity when shorter inlets were used. The results indicate that considerable biases against higher mobility species can be produced by the use of long capillary inlets in the ESI-MS interface and strategies are provided to minimize the bias against higher mobility species for efficient ion transmission through the heated capillary interface.

Research Organization:
Pacific Northwest National Lab. (PNNL), Richland, WA (United States). Environmental Molecular Sciences Lab. (EMSL)
Sponsoring Organization:
USDOE
DOE Contract Number:
AC05-76RL01830
OSTI ID:
972547
Report Number(s):
PNNL-SA-66725; JAMSEF; 24698; 17797; KP1704020; TRN: US201006%%45
Journal Information:
Journal of the American Society for Mass Spectrometry, 20(12):2265-2272, Vol. 20, Issue 12; ISSN 1044-0305
Country of Publication:
United States
Language:
English