Pulsed power supply for three APS septum magnets

Technical Report · Sun Mar 24 04:00:00 EST 1991

DOI:https://doi.org/10.2172/95576· OSTI ID:95576

McGhee, D G

Three septum magnets will be operated at a repetition-rate of 2 Hz. Two of the septum magnets are identical and operate at the same values; these are the synchrotron extraction and the storage ring injection magnets. They are transformer septum magnets, with a primary inductance of 23 {mu}H and resistance of 6.3 m{Omega}, and must be pulsed at a 2 Hz rate to extract beam from the synchrotron and inject beam into the storage ring at 7.7 GeV. The third septum magnet is used to inject electrons into the synchrotron at 650 MeV or positrons at 450 MeV. It is also a transformer septum magnet, with a primary inductance of 21 {mu}H and resistance of 6.7 m{Omega}, and must be pulsed at a 2 Hz rate. A design study was performed of the power supply proposed in the APS Title I design. This supply produces a pulse that is approximately a half-sine-wave with a base width of approximately 1/3 ms; its peakcurrent is adjustable from 470 A to 4.7 kA and is repeatable within {plus_minus}0.05%. The septum steel is reset by a half-sine pulse of reverse polarity a few milliseconds after the forward current pulse. No beam is present during reset. The use of the transformer design minimizes the cost of the capacitors used for energy storage.

• Research Organization: Argonne National Lab., IL (United States)
• Sponsoring Organization: USDOE, Washington, DC (United States)
• DOE Contract Number: W-31109-ENG-38
• OSTI ID: 95576
• Report Number(s): LS--170; ON: DE95015228
• Country of Publication: United States
• Language: English

Related Subjects

43 PARTICLE ACCELERATORS
ADVANCED PHOTON SOURCE
CONTROL
DESIGN
POWER SUPPLIES
PULSE TECHNIQUES
SEPTUM MAGNETS
SWITCHING CIRCUITS