Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Poly(dimethylsiloxane) thin films as biocompatible coatings for microfluidic devices : cell culture and flow studies with glial cells.

Journal Article · · Proposed for publication in the Journal of Biomedical Materials Research.
OSTI ID:952788
Oxygen plasma treatment of poly(dimethylsiloxane) (PDMS) thin films produced a hydrophilic surface that was biocompatible and resistant to biofouling in microfluidic studies. Thin film coatings of PDMS were previously developed to provide protection for semiconductor-based microoptical devices from rapid degradation by biofluids. However, the hydrophobic surface of native PDMS induced rapid clogging of microfluidic channels with glial cells. To evaluate the various issues of surface hydrophobicity and chemistry on material biocompatibility, we tested both native and oxidized PDMS (ox-PDMS) coatings as well as bare silicon and hydrophobic alkane and hydrophilic oligoethylene glycol silane monolayer coated under both cell culture and microfluidic studies. For the culture studies, the observed trend was that the hydrophilic surfaces supported cell adhesion and growth, whereas the hydrophobic ones were inhibitive. However, for the fluidic studies, a glass-silicon microfluidic device coated with the hydrophilic ox-PDMS had an unperturbed flow rate over 14 min of operation, whereas the uncoated device suffered a loss in rate of 12%, and the native PDMS coating showed a loss of nearly 40%. Possible protein modification of the surfaces from the culture medium also were examined with adsorbed films of albumin, collagen, and fibrinogen to evaluate their effect on cell adhesion.
Research Organization:
Sandia National Laboratories
Sponsoring Organization:
USDOE
DOE Contract Number:
AC04-94AL85000
OSTI ID:
952788
Report Number(s):
SAND2004-2597J
Journal Information:
Proposed for publication in the Journal of Biomedical Materials Research., Journal Name: Proposed for publication in the Journal of Biomedical Materials Research.
Country of Publication:
United States
Language:
English

Similar Records

Microfabrication of plastic-PDMS microfluidic devices using polyimide release layer and selective adhesive bonding
Journal Article · Tue Mar 14 20:00:00 EDT 2017 · Journal of Micromechanics and Microengineering. Structures, Devices and Systems · OSTI ID:1392268

Systematic characterization of degas-driven flow for poly(dimethylsiloxane) microfluidic devices
Journal Article · Fri Dec 31 19:00:00 EST 2010 · Biomicrofluidics · OSTI ID:1076495

Less Is More: Oligomer Extraction and Hydrothermal Annealing Increase PDMS Adhesion Forces for Materials Studies and for Biology-Focused Microfluidic Applications
Journal Article · Fri Jan 13 19:00:00 EST 2023 · Micromachines · OSTI ID:2471379