Replication of a Holographic Ion-etched Spherical Blazed Grating for use at Extreme-Ultraviolet Wavelengths: Efficiency
Using synchrotron radiation, we have measured the efficiency at an angle of incidence of 10 deg of a holographic ion-etched spherical blazed grating and three of its fourth-generation replicas. The measured efficiency profile of replicas 1 and 3 prior to multilayer coating oscillated from thin-film interference produced by the replicas' Al/Al2O3?/SiO2 structure. A Mo2C/Si multilayer coating was applied to the master grating and replicas 1 and 2. After coating, the maximum grating efficiency occurred in the -2nd order and the maximum values were 12.4% at 143.8 Angstroms for the master and 11.6% at 145.2 Angstroms for replicas 1 and 2. On the basis of measurements obtained after coating, the derived groove efficiency was 22.2% for the master, 19.4% for replica 1, and 19.3% for replica 2. The groove efficiency of the uncoated replica 3 was 24.3% at 142.5 Angstroms. We find that the replicas are reasonably faithful copies of the ion-etched master, and models based on measured atomic force microscope groove profiles are in general agreement with measured results. However, subtle issues remain regarding the widths of the peak order profile and the location of its maximum wavelength.
- Research Organization:
- Brookhaven National Laboratory (BNL) National Synchrotron Light Source
- Sponsoring Organization:
- Doe - Office Of Science
- DOE Contract Number:
- AC02-98CH10886
- OSTI ID:
- 914258
- Report Number(s):
- BNL--78826-2007-JA
- Journal Information:
- Appl. Optics-OT, Journal Name: Appl. Optics-OT Journal Issue: 2 Vol. 45; ISSN 0003-6935; ISSN APOPAI
- Country of Publication:
- United States
- Language:
- English
Similar Records
High efficiency multilayer blazed gratings for EUV and soft X-rays: Recent developments
Advanced low blaze angle x-ray gratings via nanoimprint replication and plasma etch