Nickel Alloy Primary Water Bulk Surface and SCC Corrosion Film Analytical Characterization and SCC Mechanistic Implications
Alloy 600 corrosion coupon tests were performed: (1) to quantify the temperature dependency of general corrosion and (2) to characterize the composition and structure of bulk surface corrosion films for comparison with ongoing primary water SCC (PWSCC) crack tip corrosion film analyses. Results suggest that the thermal activation energy of Alloy 600 corrosion is consistent with the thermal activation energy of nickel alloy PWSCC. Analytical investigations of the structure and composition of Alloy 600 bulk surface corrosion oxides revealed a duplex (inner and outer) oxide layer structure. The outer layer is discontinuous and comprised of relatively large (1 to 3 {micro}m) nickel ferrite crystals and smaller ({approx}0.1 {micro}m) chromium containing nickel ferrite crystals. The inner layer consists of a relatively continuous chromite spinel (major phase) and chromia (Cr{sub 2}O{sub 3} minor phase) which formed through non-selective oxidation. Chromia and dealloyed Alloy 600 (highly Ni enriched metal) were only observed at 337 C (640 F) and only along the boundaries of deformation induced fine grains and subcells. Specimens having deformation free surfaces exhibited continuous uniform inner chromite spinel oxide layers. Specimens with machining induced surface deformation produced non-uniform inner layer oxides (chromite spinel, Cr{sub 2}O{sub 3} and unoxidized material). PWSCC crack tip oxides, in contrast, were fine grain (no duplex structure) and consisted of both chromium rich spinels and ''NiO'' structure oxides. Generally, nickel rich oxides were more abundant under more oxidized conditions (reduced coolant hydrogen) and spinel rich crack tip oxides were favored under more reducing conditions (increased coolant hydrogen). Bulk surface corrosion film thickness did not correlate with observed SCC growth rates. These results suggest that corrosion is not the rate controlling step of PWSCC but rather that PWSCC and corrosion have a common rate controlling sub process (e.g., cation diffusion, oxygen ingress).
- Research Organization:
- Knolls Atomic Power Laboratory (KAPL), Niskayuna, NY
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- AC12-00SN39357
- OSTI ID:
- 903204
- Report Number(s):
- LM-07K022
- Country of Publication:
- United States
- Language:
- English
Similar Records
The effect of zinc addition to simulated PWR primary water on the PWSCC resistance, crack growth rate and surface oxide film characteristics of prefilmed Alloy 600
Effect of Corrosion Film Composition and Structure on the Corrosion Kinetics of Ni-Cr-Fe Alloys in High Temperature Water