Electrical resistance tomography using steel cased boreholes as electrodes

Patent · 31 December 1998

OSTI ID:872347

Daily, William D ^[1]; Ramirez, Abelardo L ^[2]

---

1. Livermore, CA
2. Pleasanton, CA

An electrical resistance tomography method using steel cased boreholes as electrodes. The method enables mapping the electrical resistivity distribution in the subsurface from measurements of electrical potential caused by electrical currents injected into an array of electrodes in the subsurface. By use of current injection and potential measurement electrodes to generate data about the subsurface resistivity distribution, which data is then used in an inverse calculation, a model of the electrical resistivity distribution can be obtained. The inverse model may be constrained by independent data to better define an inverse solution. The method utilizes pairs of electrically conductive (steel) borehole casings as current injection electrodes and as potential measurement electrodes. The greater the number of steel cased boreholes in an array, the greater the amount of data is obtained. The steel cased boreholes may be utilized for either current injection or potential measurement electrodes. The subsurface model produced by this method can be 2 or 3 dimensional in resistivity depending on the detail desired in the calculated resistivity distribution and the amount of data to constain the models.

• Research Organization: Lawrence Livermore National Laboratory (LLNL), Livermore, CA
• DOE Contract Number: W-7405-ENG-48
• Assignee: Regents of University of California (Oakland, CA)
• Patent Number(s): US 5914603
• OSTI ID: 872347
• Country of Publication: United States
• Language: English

Related Subjects

/324/
amount
array
borehole
borehole casing
borehole casings
boreholes
calculated
calculation
cased
cased bore
cased borehole
cased boreholes
casings
caused
conductive
constain
constrained
current
current injection
currents
data
define
depending
desired
detail
dimensional
distribution
electrical
electrical current
electrical currents
electrical potential
electrical resistance
electrical resistivity
electrically
electrically conductive
electrodes
enables
generate
independent
injected
injection
inverse
mapping
measurement
measurement electrodes
measurements
method
method enables
method utilizes
model
models
obtained
pairs
potential
potential measurement
produced
rate data
resistance
resistance tomography
resistivity
resistivity distribution
solution
steel
steel cased
subsurface
tomography
utilized
utilizes