Electrical resistance tomography using steel cased boreholes as electrodes
- LLNL
Electrical resistance tomography (ERT) using multiple electrodes installed in boreholes has been shown to be useful for both site characterization and process monitoring. In some cases, however, installing multiple downhole electrodes is too costly (e.g., deep targets) or risky (e.g., contaminated sites). For these cases we have examined the possibility of using the steel casings of existing boreholes as electrodes. The first case we investigated used an array of steel casings as electrodes. This results in very few data and thus requires additional constraints to limit the domain of possible inverse solutions. Simulations indicate that the spatial resolution and sensitivity are understandably low but it is possible to coarsely map the lateral extent of subsurface processes such as steam floods. A hybrid case uses traditional point electrode arrays combined with long-conductor electrodes (steel casings). Although this arrangement provides more data, in many cases it results in poor reconstructions of test targets. Results indicate that this method may hold promise for low resolution imaging where steel casings can be used as electrodes.
- Research Organization:
- Lawrence Livermore National Lab., CA (US)
- Sponsoring Organization:
- USDOE Office of Defense Programs (DP) (US)
- DOE Contract Number:
- W-7405-ENG-48
- OSTI ID:
- 14917
- Report Number(s):
- UCRL-JC-131572; AC1005000; AC1005000
- Country of Publication:
- United States
- Language:
- English
Monitoring DNAPL Pumping Using Integrated Geophysical Techniques
|
journal | March 1998 |
Electrical Resistance Tomography for Steam Injection Monitoring and Process Control
|
journal | July 1995 |
Electrical resistivity tomography of vadose water movement
|
journal | May 1992 |
Similar Records
Electrical resistance tomography using steel cased boreholes as electrodes
Electrical resistance tomography using steel cased boreholes as electrodes