Study of indium and solder bumps for the BTeV Pixel Detector
Conference
·
OSTI ID:816988
- Fermilab
The pixel detector proposed for the BTeV experiment at the Fermilab Tevatron will use bump-bonding technology based on either Indium or Pb/Sn solder to connect the front-end readout chips to the silicon pixel sensors. We have studied the strength of the bumps by visual inspection of the bumps bonding silicon sensor modules to dummy chips made out of glass. The studies were done before and after thermal cycles, exposed to intense irradiation, and with the assemblies glued to a graphite substrate. We have also carried out studies on effects of temperature changes on both types of bump bonds by observing the responses of single-chip pixel detectors to an Sr{sup 90} source. We report the results from these studies and our plan to measure the effect of cryogenic temperatures on the bumps.
- Research Organization:
- Fermi National Accelerator Lab., Batavia, IL (US)
- Sponsoring Organization:
- USDOE Office of Energy Research (ER) (US)
- DOE Contract Number:
- AC02-76CH03000
- OSTI ID:
- 816988
- Report Number(s):
- FERMILAB-Conf-03/363-E
- Country of Publication:
- United States
- Language:
- English
Similar Records
A study of thermal cycling and radiation effects on indium and solder bump bonds
A study of thermal cycling and radiation effects on indium and solder bump bonding
Beam test results of the BTeV silicon pixel detector
Conference
·
Mon Dec 10 23:00:00 EST 2001
·
OSTI ID:789479
A study of thermal cycling and radiation effects on indium and solder bump bonding
Conference
·
Wed Sep 12 00:00:00 EDT 2001
·
OSTI ID:786190
Beam test results of the BTeV silicon pixel detector
Conference
·
Thu Sep 28 00:00:00 EDT 2000
·
OSTI ID:764081