Die Materials for Critical Applications and Increased Production Rates
- Case Western Reserve University/Dept of Materials Science & Engineering
Die materials for aluminum die-casting need to be resistant to heat checking, and have good resistance to washout and to soldering in a fast flow of molten aluminum. To resist heat checking, die materials should have a low coefficient of thermal expansion, high thermal conductivity, high hot yield strength, good temper softening resistance, high creep strength, and adequate ductility. To resist the washout and soldering, die materials should have high hot hardness, good temper resistance, low solubility in molten aluminum and good oxidation resistance. It is difficult for one material to satisfy with all above requirements. In practice, H13 steel is the most popular material for aluminum die casting dies. While it is not an ideal choice, it is substantially less expensive to use than alternative materials. However, in very demanding applications, it is sometimes necessary to use alternative materials to ensure a reasonable die life. Copper-base, nickel-base alloys and superalloys, titanium-,molybdenum-, tungsten-base alloys, and to some extent yttrium and niobium alloys, have all been considered as potential materials for demanding die casting applications. Most of these alloys exhibit superior thermal fatigue resistance, but suffer from other shortcomings.
- Research Organization:
- Case Western Reserve University/Dept of Materials Science and Engineering (US)
- Sponsoring Organization:
- (US)
- DOE Contract Number:
- FC07-98ID13693
- OSTI ID:
- 806823
- Report Number(s):
- DOE/ID/13693
- Country of Publication:
- United States
- Language:
- English
Similar Records
Evaluation of permanent die coatings to improve the wear resistance of die casting dies. Final project report, January 1, 1995--April 30, 1997
Die Soldering in Aluminium Die Casting