Microstructure, Phase Formation, and Stress of Reactively-Deposited Metal Hydride Thin Films
This document summarizes research of reactively deposited metal hydride thin films and their properties. Reactive deposition processes are of interest, because desired stoichiometric phases are created in a one-step process. In general, this allows for better control of film stress compared with two-step processes that react hydrogen with pre-deposited metal films. Films grown by reactive methods potentially have improved mechanical integrity, performance and aging characteristics. The two reactive deposition techniques described in this report are reactive sputter deposition and reactive deposition involving electron-beam evaporation. Erbium hydride thin films are the main focus of this work. ErH{sub x} films are grown by ion beam sputtering erbium in the presence of hydrogen. Substrates include a Al{sub 2}O{sub 3} {l_brace}0001{r_brace}, a Al{sub 2}O{sub 3} {l_brace}1120{r_brace}, Si{l_brace}001{r_brace} having a native oxide, and polycrystalline molybdenum substrates. Scandium dideuteride films are also studied. ScD{sub x} is grown by evaporating scandium in the presence of molecular deuterium. Substrates used for scandium deuteride growth include single crystal sapphire and molybdenum-alumina cermet. Ultra-high vacuum methods are employed in all experiments to ensure the growth of high purity films, because both erbium and scandium have a strong affinity for oxygen. Film microstructure, phase, composition and stress are evaluated using a number of thin film and surface analytical techniques. In particular, we present evidence for a new erbium hydride phase, cubic erbium trihydride. This phase develops in films having a large in-plane compressive stress independent of substrate material. Erbium hydride thin films form with a strong <111> out-of-plane texture on all substrate materials. A moderate in-plane texture is also found; this crystallographic alignment forms as a result of the substrate/target geometry and not epitaxy. Multi-beam optical sensors (MOSS) are used for in-situ analysis of erbium hydride and scandium hydride film stress. These instruments probe the evolution of film stress during all stages of deposition and cooldown. Erbium hydride thin film stress is investigated for different growth conditions including temperature and sputter gas, and properties such as thermal expansion coefficient are measured. The in-situ stress measurement technique is further developed to make it suitable for manufacturing systems. New features added to this technique include the ability to monitor multiple substrates during a single deposition and a rapidly switched, tiltable mirror that accounts for small differences in sample alignment on a platen.
- Research Organization:
- Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Sandia National Lab. (SNL-CA), Livermore, CA (United States)
- Sponsoring Organization:
- US Department of Energy (US)
- DOE Contract Number:
- AC04-94AL85000
- OSTI ID:
- 800984
- Report Number(s):
- SAND2002-1466; TRN: US0206079
- Resource Relation:
- Other Information: PBD: 1 May 2002
- Country of Publication:
- United States
- Language:
- English
Similar Records
Production and characterization of thin film group IIIB, IVB and rare earth hydrides by reactive evaporation
Evolution of Stress in ScD{sub 2}/Cr Thin Films Fabricated by Evaporation and High Temperature Reaction