Controlled Velocity Testing of an 8-kW Wind Turbine
This paper describes a case study of the controlled-velocity test of an 8-kW wind turbine. The turbine was developed in response to the U.S. Department of Energy's small wind turbine program. As background, the prototype development is discussed. The turbine mechanical and electrical components are described. The turbine was tested on a flatbed truck and driven down an airfield runway at constant relative wind speed. Horizontal furling was used to control over-speed. Various parameters were changed to determine their effects on furling. The testing showed that the machine had insufficient rotor offset for adequate furling. Also, a rotor resonance problem was discovered and remedied. Problems associated with taking the measurements made it difficult to determine if the truck test was a suitable method for code validation. However, qualitative observations gleaned from the testing justified the effort.
- Research Organization:
- National Renewable Energy Lab., Golden, CO (US)
- Sponsoring Organization:
- US Department of Energy (US)
- DOE Contract Number:
- AC36-99GO10337
- OSTI ID:
- 786293
- Report Number(s):
- NREL/CP-500-30299
- Country of Publication:
- United States
- Language:
- English
Similar Records
Development and Validation of an Aeroelastic Model of a Small Furling Wind Turbine: Preprint
Trailing edge devices to improve performance and increase lifetime of wind-electric water pumping systems