Material Selection for Defense Waste Processing Facility

Conference · Wed Jul 17 04:00:00 EDT 1985

OSTI ID:781494

Bickford, D F

Construction has started on a facility to immobilize high-level radioactive waste in borosilicate glass at the Department of Energy's Savannah River Plant. Type 304L stainless steel is generally sufficient for supply tankage and service lines. It is used as the reference material in chemical reprocessing of reactor target and fuel tubes. Type 304L, however, has unacceptable stress corrosion cracking resistance in solutions containing formic acid and chloride. Scouting tests were performed on twelve commercial nickel-based alloys in simulated process solutions containing halides, sulfates, nitrates, mercury and formic acid. Mercuric ions and halides interact in acidic environments to increase pitting and crevice attack. Alloys with combined chromium plus molybdenum contents greater than 30 percent, that also contain greater than 9 percent molybdenum, were most resistant to pitting and crevice corrosion. Based on this testing, Alloy C-276 has been selected as the reference process equipment material, with Inconel 690 and ALLCORR selected for specialty areas.

• Research Organization: Savannah River Site (US)
• Sponsoring Organization: US Department of Energy (US)
• DOE Contract Number: AC09-76SR00001
• OSTI ID: 781494
• Report Number(s): DP-MS-84-128
• Country of Publication: United States
• Language: English

Related Subjects

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE WASTES FROM NUCLEAR FACILITIES
36 MATERIALS SCIENCE
BOROSILICATE GLASS
CORROSION RESISTANCE
CREVICE CORROSION
HIGH-LEVEL RADIOACTIVE WASTES
INCONEL 690
MATERIALS TESTING
NICKEL BASE ALLOYS
RADIOACTIVE WASTE FACILITIES
RADIOACTIVE WASTE PROCESSING
SAVANNAH RIVER PLANT
STAINLESS STEEL-304L
STRESS CORROSION