NaK pool-boiler bench-scale receiver durability test: Test design and initial results
Pool-boiler reflux receivers have been considered as an alternative to heat pipes for the input of concentrated solar energy to Stirling-cycle engines in dish-Stirling electric generation systems. Fool boilers offer simplicity in desip and fabrication. Pool-boiler solar receiver operation has been demonstrated for short periods of time. However, in order to generate cost-effective electricity, the receiver must operate without significant maintenance for the entire system life. At least one theory explaining incipient-boiling behavior of alkali metals indicates that favorable start-up behavior should deteriorate over time. Many factors affect the stability and startup behavior of the boiling system. Therefore, it is necessary to simulate the full-scale design in every detail as much as possible, including flux levels materials, and operating cycles. On-sun testing is impractical due to the limited test time available. No boiling system has been demonstrated with the current porous boiling enhancement surface and materials for a significant period of time. A test vessel was constructed with a Friction Coatings Inc. porous boiling enhancement surface. The vessel is heated with a quartz lamp array providing about 92 W/Cm[sup 2] peak incident thermal flux. The vessel is charged with NaK-78, which is liquid at room temperature. This allows the elimination of costly electric preheating, both on this test and on full-scale receivers. The vessel is fabricated from Haynes 230 alloy, selected for its high temperature strength and oxidation resistance. The vessel operates at 750[degrees]C around the clock, with a 1/2-hour shutdown cycle to ambient every 8 hours. Temperature data is continually collected. The test design and initial (first 2500 hours and 300 start-ups) test data are presented here. The test is designed to operate for 10,000 hours, and will be complete in the spring of 1994.
- Research Organization:
- Sandia National Labs., Albuquerque, NM (United States)
- Sponsoring Organization:
- DOE; USDOE, Washington, DC (United States)
- DOE Contract Number:
- AC04-76DP00789
- OSTI ID:
- 7368531
- Report Number(s):
- SAND-93-1208C; CONF-930804--4; ON: DE93014930
- Country of Publication:
- United States
- Language:
- English
Similar Records
NaK pool-boiler bench-scale receiver durability test: Test results and materials analysis
First on-sun test of NaK-78 pool-boiler solar receiver
Related Subjects
140703* -- Solar Thermal Power Systems-- Distributed Collector
ALKALI METALS
CONVERSION
ELEMENTS
ENERGY CONVERSION
ENGINES
EXPERIMENT PLANNING
FLUIDS
HEAT ENGINES
LIQUID METALS
LIQUIDS
METALS
PLANNING
POTASSIUM
SODIUM
SOLAR ENERGY CONVERSION
SOLAR RECEIVERS
SOLAR THERMAL CONVERSION
START-UP
STIRLING ENGINES
TESTING