Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Investigation of the fabrication process of hot-worked stainless-steel and Mo sheathed PbMo/sub 6/ S/sub 8/ wires

Journal Article · · J. Appl. Phys.; (United States)
DOI:https://doi.org/10.1063/1.341922· OSTI ID:7257076
Stainless-steel and Mo sheathed PbMo/sub 6/ S/sub 8/ wires have been fabricated by hot working from modified PbS, Mo, and MoS/sub 2/ mixed powders which were prepared by reacting Pb, Mo, and S at 530 /sup 0/C. Critical current densities were investigated for different preparation conditions, and it is revealed that obtaining continuous current path between PbMo/sub 6/ S/sub 8/ grains is the most important factor to achieve high critical current density. The J/sub c/ value of 2.8 x 10/sup 4/ Acm/sup 2/ (8 T), 7.8 x 10/sup 3/ Acm/sup 2/ (15 T), and 1.3 x 10/sup 3/ Acm/sup 2/ (23 T) was observed for the PbMo/sub 6/ S/sub 7.0/ wire heat treated at 700 /sup 0/C.copic
Research Organization:
Electrotechnical Laboratory, MITI, 1-1-4 Umezono, Tsukuba-shi, Ibaraki 305, Japan
OSTI ID:
7257076
Journal Information:
J. Appl. Phys.; (United States), Journal Name: J. Appl. Phys.; (United States) Vol. 64:2; ISSN JAPIA
Country of Publication:
United States
Language:
English

Similar Records

Current carrying properties of the HIP treated Mo-sheath PbMo sub 6 S sub 8 wires
Conference · Thu Feb 28 23:00:00 EST 1991 · IEEE Transactions on Magnetics (Institute of Electrical and Electronics Engineers); (United States) · OSTI ID:5715357

The phase field of the chevrel phase PbMo/sub 6/S/sub 8/ at 900/sup 0/C and some superconducting and structural properties
Journal Article · Fri Jan 31 23:00:00 EST 1986 · Mater. Res. Bull.; (United States) · OSTI ID:5956905

Superconducting wires of PbMo/sub 5. 1/S/sub 6/ by a powder technique
Journal Article · Tue Jan 31 23:00:00 EST 1978 · J. Appl. Phys.; (United States) · OSTI ID:5171603