Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Coal surface control for advanced fine coal flotation. Quarterly report No. 5, October 1, 1989--December 31, 1989

Technical Report ·
DOI:https://doi.org/10.2172/7015191· OSTI ID:7015191
; ; ; ; ; ;  [1]; ; ; ; ;  [2]; ; ;  [3]; ; ;  [4]
  1. California State Senate Water Resources Committee, Sacramento, CA (USA)
  2. Columbia Univ., New York, NY (USA)
  3. Utah Univ., Salt Lake City, UT (USA)
  4. Praxis Engineers, Inc
The primary goal of this research project is to develop advanced flotation methods for coal cleaning in order to achieve 90{percent} pyritic sulfur removal at 90{percent} Btu recovery, using coal samples procured from six major US coal seams. Concomitantly, the ash content of these coals is to be reduced to 6{percent} or less. Investigation of mechanisms for the control of coal and pyrite surfaces prior to fine coal flotation is an important aspect of the project objectives. A second major objective is to investigate factors involved in the progressive weathering and oxidation of three base coals stored in three storage modes, namely, open, covered and in an argon-inerted atmosphere, over a period of twelve months. This quarter results are presented under the following topics: effect of ph modifiers on flotation performance; effect of anionic reagents during grinding; effect of organic monomers; effect of non-ionic reagents; grinding with collector and flotation kinetics; and flotation behavior of weathered coals. (CBS)
Research Organization:
California State Senate Water Resources Committee, Sacramento, CA (USA); Columbia Univ., New York, NY (USA); Utah Univ., Salt Lake City, UT (USA); Praxis Engineers, Inc., Milpitas, CA (USA)
Sponsoring Organization:
USDOE Office of Fossil Energy (FE)
DOE Contract Number:
AC22-88PC88878
OSTI ID:
7015191
Report Number(s):
DOE/PC/88878-T5; ON: DE90007229
Country of Publication:
United States
Language:
English