Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Coal surface control for advanced fine coal flotation

Technical Report ·
DOI:https://doi.org/10.2172/5701818· OSTI ID:5701818
The primary goal of this project is to develop advanced flotation methods for coal cleaning in order to achieve 90% pyritic sulfur removal at 90% Btu yield, using coal samples procured from six major US coal seams. Concomitantly, the ash content of these coals is to be reduced to 6% or less. Investigation of mechanisms for the control of coal and pyrite surfaces prior to fine coal flotation is an important aspect of the project objectives. Large quantities of coal samples have been procured from six major seams. Samples of the same coals are also to be supplied to the University of Pittsburgh for selective agglomeration research. A second objective is to investigate factors involved in the progressive weathering and oxidation of coal stored in three storage modes, namely, open, covered and in an argon-inerted atmosphere, over a period of twelve months. After regular intervals of weathering, samples of the three base coals are to be collected and shipped to both the University of Pittsburgh and the University of California at Berkeley for characterization studies of the weathered coals. Work is divided into 8 tasks: (1) project work plan; (2) coal procurement and weathering; (3) coal characterization; (4) standard beneficiation test; (5) grinding studies; (6) surface modification studies; (7) exploratory R D and support; and (8) task integration and project management. 8 refs., 50 figs., 38 tabs.
Research Organization:
Columbia Univ., New York, NY (USA); Utah Univ., Salt Lake City, UT (USA); California Univ., Berkeley, CA (USA); Praxis Engineers, Inc., Milpitas, CA (USA)
Sponsoring Organization:
DOE/FE
DOE Contract Number:
AC22-88PC88878
OSTI ID:
5701818
Report Number(s):
DOE/PC/88878-T4; ON: DE90001157
Country of Publication:
United States
Language:
English