Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Sulfation of Al[sub 2]O[sub 3] in flue gas desulfurization by CuO/[gamma]-Al[sub 2]O[sub 3] sorbent

Journal Article · · Industrial and Engineering Chemistry Research; (United States)
DOI:https://doi.org/10.1021/ie00031a018· OSTI ID:6927342
; ;  [1]
  1. Korea Advanced Inst. of Science and Technology, Taejon (Korea, Republic of). Dept. of Chemical Engineering

Deep sulfation of alumina support in flue gas desulfurization by CuO/[gamma]-Al[sub 2]O[sub 3] sorbent causes a detrimental effect on stability and regeneration of the sorbent since regeneration of sulfated sorbent requires higher temperatures. To define the sulfation characteristics of alumina support in CuO/[gamma]-Al[sub 2]O[sub 3], the effects of temperature, CuO loading, and addition of NaCl on sulfation of alumina support have been determined in a thermobalance reactor. The sulfation degree of alumina support in terms of the amount of sulfate ions present on the support can be classified into three types (surface, slightly deep, and bulk solutions) as a function of reaction temperature and CuO loading. Surface sulfation (sulfate ions < 2.0 [times] 10[sup 18] ions/m[sup 2]) occurs at CuO loading between 2 and 11 wt% at reaction temperature 250--350 C, slightly deep sulfation (2.0 [times] 10[sup 18] ions/m[sup 2] < sulfate ions < 3.4 [times] 10[sup 18] ions/m[sup 2]) occurs with the loading below 4 wt % at 350--600 C, and bulk sulfation (3.4 [times] 10[sup 18] ions/m[sup 2]

OSTI ID:
6927342
Journal Information:
Industrial and Engineering Chemistry Research; (United States), Journal Name: Industrial and Engineering Chemistry Research; (United States) Vol. 33:7; ISSN IECRED; ISSN 0888-5885
Country of Publication:
United States
Language:
English