Mechanical properties of Y-PSZ after aging at low temperature

Journal Article · Wed Jan 01 04:00:00 EST 1986 · Int. J. High Tech. Ceram.; (United States)

DOI:https://doi.org/10.1016/0267-3762(86)90011-1· OSTI ID:6905185

Masaki, T

Y-PSZ (partially-stabilized zirconia) materials containing 2.0, 2.5, 3.0, 4.0, and 5.0 mol-percent of yttrium oxide, which had been prepared by cold isostatic pressing and sintering, hot pressing, orhot isostatic pressing, were aged in air between 200 and 500 C for 500-900 h. The materials were examined to determine their mechanical properties and microstructure. It was confirmed that Y-PSZ containing 2.5-5.0 mol-percent yttrium oxide showed little degradation in strength after 2000 h of aging at 200 C with no changes in monoclinic/tetragonal ratio and density, when the grain size of the sintered material was less than 0.5 micron and the density was greater than 6.07 Mg/cu cm. 20 references.

• Research Organization: Toray Industries, Inc., Otsu, Japan
• OSTI ID: 6905185
• Journal Information: Int. J. High Tech. Ceram.; (United States), Journal Name: Int. J. High Tech. Ceram.; (United States) Vol. 2:2; ISSN IJHCE
• Country of Publication: United States
• Language: English

Related Subjects

36 MATERIALS SCIENCE
360202* -- Ceramics
Cermets
& Refractories-- Structure & Phase Studies
360203 -- Ceramics
Cermets
& Refractories-- Mechanical Properties
CERAMICS
CHALCOGENIDES
COLD PRESSING
CRYSTAL STRUCTURE
FABRICATION
GRAIN SIZE
LOW TEMPERATURE
MATERIALS WORKING
MECHANICAL PROPERTIES
MICROSTRUCTURE
OXIDES
OXYGEN COMPOUNDS
PRESSING
SINTERING
SIZE
TRANSITION ELEMENT COMPOUNDS
YTTRIUM COMPOUNDS
YTTRIUM OXIDES
ZIRCONIUM COMPOUNDS
ZIRCONIUM OXIDES