Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Flow sheet at Lu-Op plant for auto gasoline for 170/sup 0/ E. P. gasoline for DHD from bituminous coal

Technical Report ·
OSTI ID:6728775
Several tables with varied information concerning gasoline production are presented. The first table concerned the 700 atm liquid phase running to produce: (1) gasoline and middle oil or (2) 32% heavy oil excess. This gave information such as the rate of primary crusing, drying, paste milling and pressing, gas circulation, oil washing, compression, centrifuge plant operations, kiln plant operations, cold catchpot products, and yields. It also gave stall sizes. The second and third charts contained information for the 300 atm and 700 atm vapor phase processes with subdivisions for auto gasoline and 170/sup 0/C endpoint gasoline. It showed rates for injection pumps, gas circulation, compression, yield from columns, L.P.G. production, gasoline stabilization and wash, hydrogenation gas production with 95% recovery, percent of aromatic recovery, and total hydrogen consumption. The fourth chart concerned hydrogen production for the Lu-Op plant from bituminous coal. The first major category was coke with subcategories of DHD gasoline in the 700 atm vapor phase system and in the 300 atm vapor phase system. The second category was hydrogenation gas splitting with the same subcategories as above. A table of power requirements for 170/sup 0/C endpoint gasoline including the liquid phase and hydrogen production for 300 atm and 700 atm vapor phase processes is included. 5 tables
Research Organization:
I.G. Farbenindustrie, A.G., Ludwigshafen (Germany)
OSTI ID:
6728775
Report Number(s):
TOM-237-1064-1069
Country of Publication:
United States
Language:
English