Thin film porous membranes based on sol-gel chemistry for catalytic sensors
Conference
·
OSTI ID:658200
Nanoporous sol-gel based films are finding a wide variety of uses including gas separations and supports for heterogeneous catalysts. The films can be formed by spin or dip coating, followed by relatively low temperature annealing. The authors used several types of these films as coatings on the Pd alloy thin film sensors they had previously fabricated and studied. The sol-gel films have little effect on the sensing response to H{sub 2} alone. However, in the presence of other gases, the nanoporous film modifies the sensor behavior in several beneficial ways. (1) They have shown that the sol-gel coated sensors were only slightly poisoned by high concentrations of H{sub 2}S while uncoated sensors showed moderate to severe poisoning effects. (2) For a given partial pressure of H{sub 2}, the signal from the sensor is modified by the presence of O{sub 2} and other oxidizing gases.
- Research Organization:
- Sandia National Labs., Albuquerque, NM (United States)
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- AC04-94AL85000
- OSTI ID:
- 658200
- Report Number(s):
- SAND--97-3124C; CONF-980727--; ON: DE98005009; BR: DP0102022
- Country of Publication:
- United States
- Language:
- English
Similar Records
Thin film porous membranes for catalytic sensors
Catalytic Membrane Sensors
Sol-gel coating on acoustic wave devices: Thin film characterization and chemical sensor development
Conference
·
Sun Jun 01 00:00:00 EDT 1997
·
OSTI ID:481843
Catalytic Membrane Sensors
Technical Report
·
Mon Nov 30 23:00:00 EST 1998
·
OSTI ID:2882
Sol-gel coating on acoustic wave devices: Thin film characterization and chemical sensor development
Conference
·
Sun Dec 31 23:00:00 EST 1989
·
OSTI ID:6884008