Advanced industrial gas turbine technology readiness demonstration program. Phase II. Final report: compressor rig fabrication assembly and test

Technical Report · Sun Mar 01 04:00:00 EST 1981

DOI:https://doi.org/10.2172/6508675· OSTI ID:6508675

Schweitzer, J. K.; Smith, J. D.

The results of a component technology demonstration program to fabricate, assemble and test an advanced axial/centrifugal compressor are presented. This work was conducted to demonstrate the utilization of advanced aircraft gas turbine cooling and high pressure compressor technology to improve the performance and reliability of future industrial gas turbines. Specific objectives of the compressor component testing were to demonstrate 18:1 pressure ratio on a single spool at 90% polytropic efficiency with 80% fewer airfoils as compared to current industrial gas turbine compressors. The compressor design configuration utilizes low aspect ratio/highly-loaded axial compressor blading combined with a centrifugal backend stage to achieve the 18:1 design pressure ratio in only 7 stages and 281 axial compressor airfoils. Initial testing of the compressor test rig was conducted with a vaneless centrifugal stage diffuser to allow documentation of the axial compressor performance. Peak design speed axial compressor performance demonstrated was 91.8% polytropic efficiency at 6.5:1 pressure ratio. Subsequent documentation of the combined axial/centrifugal performance with a centrifugal stage pipe diffuser resulted in the demonstration of 91.5% polytropic efficiency and 14% stall margin at the 18:1 overall compressor design pressure ratio. The demonstrated performance not only exceeded the contract performance goals, but also represents the highest known demonstrated compressor performance in this pressure ratio and flow class. The performance demonstrated is particularly significant in that it was accomplished at airfoil loading levels approximately 15% higher than that of current production engine compressor designs. The test results provide conclusive verification of the advanced low aspect ratio axial compressor and centrifugal stage technologies utilized.

• Research Organization: Pratt and Whitney Aircraft Group, West Palm Beach, FL (USA). Government Products Div.
• Sponsoring Organization: USDOE Office of Fossil Energy (FE)
• DOE Contract Number: AC05-76OR05035
• OSTI ID: 6508675
• Report Number(s): DOE/OR/05035--T2; FR--13781
• Country of Publication: United States
• Language: English

Related Subjects

20 FOSSIL-FUELED POWER PLANTS
200104* -- Fossil-Fueled Power Plants-- Components
COMPRESSORS
DATA
DESIGN
ENGINES
EXPERIMENTAL DATA
FABRICATION
FOSSIL-FUEL POWER PLANTS
GAS TURBINE ENGINES
HEAT ENGINES
INDUSTRIAL PLANTS
INFORMATION
INTERNAL COMBUSTION ENGINES
NUMERICAL DATA
PERFORMANCE
PERFORMANCE TESTING
POWER PLANTS
RESEARCH PROGRAMS
TESTING
THERMAL POWER PLANTS