Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Measurements and analysis of the equivalent circuit of the GEC RF Reference Cell. [GEC (Gaseous Electronics Conference); RF (radio-frequency)]

Technical Report ·
OSTI ID:6475989
 [1]
  1. Illinois Univ., Urbana, IL (United States). Dept. of Electrical and Computer Engineering

The equivalent circuit of the GEC RF Reference Cell is determined by the use of a vector impedance meter and reported here. The measurement procedure and data reduction techniques are discussed and typical data are presented from which the component values are determined. Once the circuit is established, one can use it to define the ABCD parameters of the Cell which relate the terminal measurements to those at the plasma. A significant and as yet unresolved question is emphasized: namely, [open quotes]what is the path for the rf current [close quotes] An experimental procedure for answering this question is suggested, but there does not appear to be a simple [open quotes]plasma[close quotes] reason for the answer. To obtain such an answer is a challenge to the experimenters and modelers. While the emphasis is on the GEC RF Reference Cell, the procedure, data reduction techniques, and [open quotes]the question[close quotes] are pertinent to all reactors.

Research Organization:
Sandia National Labs., Albuquerque, NM (United States); Illinois Univ., Urbana, IL (United States). Dept. of Electrical and Computer Engineering
Sponsoring Organization:
DOE; USDOE, Washington, DC (United States)
DOE Contract Number:
AC04-76DP00789
OSTI ID:
6475989
Report Number(s):
SAND-92-7284; ON: DE93013498
Country of Publication:
United States
Language:
English