Study of the effects of polishing, etching, cleaving, and water leaching on the UV laser damage of fused silica
A damage morphology study was performed with a 355 nm Nd:YAG laser on synthetic UV-grade fused silica to determine the effects of post- polish chemical etching on laser-induced damage, compare damage morphologies of cleaved and polished surfaces, and understand the effects of the hydrolyzed surface layer and waste-crack interactions. The samples were polished , then chemically etched in buffered HF solution to remove 45,90,135, and 180 nm of surface material. Another set of samples was cleaved and soaked in boiling distilled water for 1 second and 1 hour. All the samples were irradiated at damaging fluencies and characterized by Normarski optical microscopy and scanning electron microscopy. Damage was initiated as micro-pits on both input and output surfaces of the polished fused silica sample. At higher fluencies, the micro-pits generated cracks on the surface. Laser damage of the polished surface showed significant trace contamination levels within a 50 nm surface layer. Micro-pit formation also appeared after irradiating cleaved fused silica surfaces at damaging fluences. Linear damage tracks corresponding cleaving tracks were often observed on cleaved surfaces. Soaking cleaved samples in water produced wide laser damage tracks.
- Research Organization:
- Lawrence Livermore National Lab., CA (United States)
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- W-7405-ENG-48
- OSTI ID:
- 641346
- Report Number(s):
- UCRL-JC--129275; CONF-9710116--; ON: DE98052069; BR: DP0212000; CNN: W-7405-Eng-48
- Country of Publication:
- United States
- Language:
- English
Similar Records
Methods for improving the damage performance of fused silica polished by magnetorheological finishing
UV Laser Conditioning for Reduction of 351-nm Damage Initiation in Fused Silica