A 42-cm bore superconducting coil using pre-reacted Nb/sub 3/Sn
Conference
·
· IEEE Trans. Magn.; (United States)
OSTI ID:6356611
A 42-cm bore coil is to be wound with 8 layers of high field conductor and 10 layers of low field conductor. Each layer will contain about 60 turns. The outside diameter will be 62 cm, and the length 57 cm. When operated at 1.8 K with 2300 A, it will add 4 T to the 9.3 T from a NbTi magnet which surrounds it. By using pre-reacted conductors we can obtain strength from cold worked copper and avoid the complications from having to heat treat such a large coil. Obviously, the advantages had to be weighed against the measures which would have to be taken to avoid damaging the brittle Nb/sub 3/Sn.
- Research Organization:
- Francis Bitter National Magnet Lab., Massachusetts Institute of Technology, Cambridge, MA (US)
- OSTI ID:
- 6356611
- Report Number(s):
- CONF-870901-
- Conference Information:
- Journal Name: IEEE Trans. Magn.; (United States) Journal Volume: 24:2
- Country of Publication:
- United States
- Language:
- English
Similar Records
A Nb sub 3 Sn high field dipole
Experiment of 10-T, 60-cm-bore Nb/sub 3/Sn test module coil (TMC-1) for the cluster test program
10-T, 60 cm bore Nb/sub 3/Sn test module/coil design
Conference
·
Thu Feb 28 23:00:00 EST 1991
· IEEE Transactions on Magnetics (Institute of Electrical and Electronics Engineers); (United States)
·
OSTI ID:5923875
Experiment of 10-T, 60-cm-bore Nb/sub 3/Sn test module coil (TMC-1) for the cluster test program
Journal Article
·
Sun May 01 00:00:00 EDT 1983
· IEEE Trans. Magn.; (United States)
·
OSTI ID:5535672
10-T, 60 cm bore Nb/sub 3/Sn test module/coil design
Conference
·
Thu Dec 31 23:00:00 EST 1981
· Adv. Cryog. Eng.; (United States)
·
OSTI ID:6202546