Thermal barrier coatings application in diesel engines
Commercial use of thermal barrier coatings in diesel engines began in the mid 70`s by Dr. Ingard Kvernes at the Central Institute for Industrial Research in Oslo, Norway. Dr. Kvernes attributed attack on diesel engine valves and piston crowns encountered in marine diesel engines in Norwegian ships as hot-corrosion attributed to a reduced quality of residual fuel. His solution was to coat these components to reduce metal temperature below the threshold of aggressive hot-corrosion and also to provide protection. The Department of Energy has supported thermal barrier coating development for diesel engine applications. In the Clean Diesel - 50 Percent Efficient (CD-50) engine for the year 2000, thermal barrier coatings will be used on piston crowns and possibly other components. The primary purpose of the thermal barrier coatings will be to reduce thermal fatigue as the engine peak cylinder pressure will nearly be doubled. As the coatings result in higher available energy in the exhaust gas, efficiency gains are achieved through use of this energy by turbochargers, turbocompounding or thermoelectric generators.
- Research Organization:
- National Aeronautics and Space Administration, Cleveland, OH (United States). Lewis Research Center
- OSTI ID:
- 63479
- Report Number(s):
- N--95-26119; NASA-CP--10170; E--9509; NAS--1.55:10170; CONF-9503150--
- Country of Publication:
- United States
- Language:
- English
Similar Records
Ceramic coatings on diesel engine components. Period covered: January 1979-August 1979
Investigation of enhanced capability thermal-barrier coating systems for diesel-engine components. Final report