Selective Etching of Wide Bandgap Nitrides
- Sandia National Labs., Albuquerque, NM (United States)
- University of Florida, Department of Materials Science and Engineering, Gainesville, FL (United States)
HIGH-DENSITY PLASMA ETCHING HAS BEEN AN EFFECTIVE PATTERNING TECHNIQUE FOR THE GROUP-III NITRIDES DUE TO ION FLUXES WHICH ARE 2 TO 4 ORDERS OF MAGNITUDE HIGHER THAN MORE CONVENTIONAL REACTIVE ION ETCH (RIE) SYSTEMS. GAN ETCH RATES EXCEEDING 0.68 MICROMETER/MIN HAVE BEEN REPORTED IN C12/H2/AR INDUCTIVELY COUPLED PLASMAS (ICP) AT -280 V DC-BIAS. UNDER THESE CONDITIONS, THE ETCH MECHANISM IS DOMINATED BY ION BOMBARDMENT ENERGIES WHICH CAN INDUCE DAMAGE AND MINIMIZE ETCH SELECTIVITY. HIGH SELECTIVITY ETCH PROCESSES ARE OFTEN NECESSARY FOR HETEROSTRUCTURE DEVICES WHICH ARE BECOMING MORE PROMINENT AS GROWTH TECHNIQUES IMPROVE. IN THIS STUDY, WE WILL REPORT HIGH-DENSITY ICP ETCH RATES AND SELECTIVITIES FOR GAN, ALN, AND INN AS A FUNCTION OF CATHODE POWER, ICP-SOURCE POWER, AND CHAMBER PRESSURE. GAN:ALN SELECTIVITIES {gt} 8:1 were observed in a C12/Ar plasma at 10 mTorr pressure, 500 W ICP-source power, and 130 W cathode rf-power, while the GaN:InN selectivity was optimized at approx. 6.5:1 at 5 mTorr, 500 W ICP-source power, and 130 W cathode rf-power.
- Research Organization:
- Sandia National Labs., Albuquerque, NM (United States)
- Sponsoring Organization:
- USDOE Assistant Secretary for Management and Administration, Washington, DC (United States)
- DOE Contract Number:
- AC04-94AL85000
- OSTI ID:
- 629306
- Report Number(s):
- SAND--98-0257C; CONF-971201--; ON: DE98002674; BR: YN0100000
- Country of Publication:
- United States
- Language:
- English
Similar Records
Selective dry etching of III-V nitrides in Cl{sub 2}/Ar, CH{sub 4}/H{sub 2}/Ar, ICi/Ar, and IBr/Ar
High rate electron cyclotron resonance etching of GaN, InN, and AlN