Stress effects in boron-implanted polysilicon films
Polycrystalline silicon films are used throughout the semiconductor industry in the fabrication of both metaloxide-semiconductor (MOS) and bipolar products. For example, in MOS products, doped polysilicon is used for gate and interconnection materials. In bipolar products, polysilicon is used for device isolation, passive resistors, or active base elements. While these films are usually used with different ranges of doping, stress measurement of doped polysilicon is not well reported. Earlier reports of thick (up to 500..mu..m) intrinsic polysilicon films gave tensile stress properties. Later reports using thinner films (4000-6000A) showed compressive stress properties. The thinner films were deposited under different conditions than the thick films, and were both intrinsic and boron diffused. The purpose of conducting this study was to determine quantitative stress measurements made on boron-implanted and annealed polycrystalline films to assess the possible effect of stress on device fabrication, such as pattern distortion and change in the electrical property of a substrate. Comparative warpage measurements were made treating various film structures as substrates. The effect of doping concentrations and annealing temperatures on the film stress was also studied. Film stress was determined using comparative warpage measurements on oxide, polysilicon, and nitride films.
- Research Organization:
- IBM Corporation, General Technology Division, East Fishkill Facility, Hopewell Junction, New York
- OSTI ID:
- 6276213
- Journal Information:
- J. Electrochem. Soc.; (United States), Vol. 131:10
- Country of Publication:
- United States
- Language:
- English
Similar Records
Fatigue failure in thin-film polysilicon is due to subcriticalcracking within the oxide layer
New Approaches to Low-Cost Scalable Doping of Interdigitated back Contact Silicon Solar Cells (Final Report)
Related Subjects
14 SOLAR ENERGY
42 ENGINEERING
MOS SOLAR CELLS
FABRICATION
SEMICONDUCTOR DEVICES
SILICON
ION IMPLANTATION
STRESS ANALYSIS
TENSILE PROPERTIES
ANNEALING
BORON
DOPED MATERIALS
FILMS
MATERIALS TESTING
POLYCRYSTALS
TEMPERATURE EFFECTS
CRYSTALS
DIRECT ENERGY CONVERTERS
ELEMENTS
EQUIPMENT
HEAT TREATMENTS
MATERIALS
MECHANICAL PROPERTIES
PHOTOELECTRIC CELLS
PHOTOVOLTAIC CELLS
SEMIMETALS
SOLAR CELLS
SOLAR EQUIPMENT
TESTING
360603* - Materials- Properties
140501 - Solar Energy Conversion- Photovoltaic Conversion
420800 - Engineering- Electronic Circuits & Devices- (-1989)