Use of fly-ash for sealing a radioactive waste repository
- ANDRA, Fontenay-Aux-Roses (France)
- INERIS, Verneuil-En-Halatte (France)
- EDF, Aix-En-Provence (France)
The mining industry currently uses fly-ash from coal-fired power-plants to close access shafts in abandoned mines, in sedimentary formations. The technique consists of installing a plug of fly-ash, about fifty meters high, at the base of the shaft-lining. In this study, fly-ash is considered as a possible sealant for radioactive repositories in sedimentary formations, as well as in hard rock. Specific studies have been conducted in order to assess the feasibility of this technique, and to improve the long-term performance of the fly-ash seals. The hydraulic and mechanical characteristics of fly-ash, taken from the plug of an abandoned shaft, as well as from dumps of various ages, were measured. Laboratory tests showed that it is possible to reduce the hydraulic conductivity of fly-ash by a factor of thousand, with the addition of ten percent bentonite. Moreover, it seems possible to block fine fissures in the surrounding damaged rock by injecting grouts made of cement and fly-ash having maximum diameters of twenty micrometers.
- OSTI ID:
- 62213
- Report Number(s):
- CONF-921101-Vol.294; TRN: 95:002922-0029
- Resource Relation:
- Conference: 16. Materials Research Society (MRS) fall meeting, Boston, MA (United States), 30 Nov - 5 Dec 1992; Other Information: PBD: 1993; Related Information: Is Part Of Scientific basis for nuclear waste management XVI; Interrante, C.G. [ed.] [Nuclear Regulatory Commission, Washington, DC (United States)]; Pabalan, R.T. [ed.] [Southwest Research Inst., San Antonio, TX (United States)]; PB: 959 p.
- Country of Publication:
- United States
- Language:
- English
Similar Records
The reaction of acid mine drainage with fly ash from coal combustion
Properties of cement-fly ash grout admixed with bentonite, silica fume, or organic fiber