Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Sources of error in the determination of trichloroethylene in blood

Journal Article · · Bulletin of Environmental Contamination and Toxicology; (USA)
DOI:https://doi.org/10.1007/BF01701820· OSTI ID:6207763
; ; ;  [1]
  1. National Institute of Environmental Health Sciences, Research Triangle Park, NC (USA)
One of the more common methods in determining volatile chemicals in biological samples involves an extraction procedure followed by a chromatographic quantitation step. These analytical methods are generally validated using conventional techniques with some attempts to minimize analyte losses during sample handling. After a successful validation, the analyst will feel confident that the procedure employed would provide an accurate determination of the analyte in the sample. However, it is difficult or sometimes impossible to identify precisely the losses that occur during sample handling. In this paper problems associated with the accurate determination of the volatile analyte, trichloroethylene, (TCE) are addressed. Gas chromatography was performed with a Perkin-Elmer Sigma 2000 chromatograph equipped with a 63Ni detector. Experiments to determine recovery of TCE were performed on both water and blood samples.
OSTI ID:
6207763
Journal Information:
Bulletin of Environmental Contamination and Toxicology; (USA), Journal Name: Bulletin of Environmental Contamination and Toxicology; (USA) Vol. 45:1; ISSN 0007-4861; ISSN BECTA
Country of Publication:
United States
Language:
English