Effect of milling on slip casting of partially stabilized zirconia

Journal Article · Tue Oct 01 04:00:00 EDT 1985 · J. Am. Ceram. Soc.; (United States)

DOI:https://doi.org/10.1111/j.1151-2916.1985.tb11524.x· OSTI ID:6198438

Taguchi, M; Miyamoto, H; Takahashi, Y

Specimens of partially stabilized zirconia were slip cast from aqueous suspensions and sintered at 1500C for 3 h. The relative density of the cast specimens and the firing shrinkage of the sintered specimens depend on the milling time for the suspension. Vickers hardness and K /SUB 1C/ values of 11.46 + or - 0.07 GN/mS and 6.10 + or - 0.04 MN.mTS, respectively, were obtained for all sintered specimens. The dispersion of the suspension is important in increasing the relative density of the cast specimens.

• Research Organization: Osaka Prefectural Industrial Research Institute, Nishi-Ku, Osaka
• OSTI ID: 6198438
• Journal Information: J. Am. Ceram. Soc.; (United States), Journal Name: J. Am. Ceram. Soc.; (United States) Vol. 68:10; ISSN JACTA
• Country of Publication: United States
• Language: English

Related Subjects

36 MATERIALS SCIENCE
360201* -- Ceramics
Cermets
& Refractories-- Preparation & Fabrication
AQUEOUS SOLUTIONS
CASTING
CERAMICS
CHALCOGENIDES
DENSITY
DISPERSIONS
FABRICATION
MACHINING
MATERIALS TESTING
MILLING
MIXTURES
OXIDES
OXYGEN COMPOUNDS
PHYSICAL PROPERTIES
SINTERING
SLIP CASTING
SOLUTIONS
STABILIZATION
TESTING
TRANSITION ELEMENT COMPOUNDS
VERY HIGH TEMPERATURE
VICKERS HARDNESS
ZIRCONIUM COMPOUNDS
ZIRCONIUM OXIDES