Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Fabrication of Y-Ba-Cu-O superconductor for magnetic bearing

Conference · · IEEE Trans. Magn.; (United States)
OSTI ID:5969422
Although high Tc oxide superconductors, such as Y-Ba-Cu-O, should have high possibilities to be applied to repulsive magnetic bearings, various kinds of improvements on the mechanical and electrical properties of the materials have to be done. In this study, the authors tried to improve these properties by changing compression pressure in the process used in forming a pellet systematically and by adding Ag powder to Y-Ba-Cu-O powder. All materials used here were confirmed as Y/sub 1/Ba/sub 2/Cu/sub 3/O/sub 7/ by X-ray diffraction analysis. Density, hardness, temperature of zero resistance, and a ratio of resistivity at a temperature of 300 K and that at temperature of 100 K increase as the compression pressure becomes higher. On the other hand, a temperature of resistance drop and a repulsive force due to Meissner effect are insensitive to the pressure. Ag content in the pellets makes the temperature of zero resistance higher. In the process of this study, it was found that the ratio of resistivity had a possibility to be used as a criterion for better superconductive characteristics.
Research Organization:
9302170
OSTI ID:
5969422
Report Number(s):
CONF-880812-
Conference Information:
Journal Name: IEEE Trans. Magn.; (United States) Journal Volume: 25:2
Country of Publication:
United States
Language:
English