A Comparison of 1 T(Omega) and 10 T (Omega) High Resistance Standards Between NIST and Sandia
Conference
·
OSTI ID:5950
- Sandia National Laboratories
NIST-built 10 T{Omega} and commercial 1 T{Omega} standard resistors were hand carried between NIST and Sandia for a high resistance comparison. The comparison tested the ruggedness of the new NIST-built standard resistors, provided a check of the scaling between the two laboratories, supported measurements to reestablish NIST calibration services at 10 T{Omega} and 100 T{Omega}, and demonstrated the possibility of establishing a NIST high resistance measurement assurance program (MAP). The comparison has demonstrated agreement on the order of 0.07% which is within the expanded uncertainties (coverage factor = 2) of NIST and Sandia at 1 T{Omega} and 10 T{Omega}.
- Research Organization:
- Sandia National Labs., Albuquerque, NM (US); Sandia National Labs., Livermore, CA (US)
- Sponsoring Organization:
- US Department of Energy (US)
- DOE Contract Number:
- AC04-94AL85000
- OSTI ID:
- 5950
- Report Number(s):
- SAND98-2847C
- Country of Publication:
- United States
- Language:
- English
Similar Records
Monitoring the 1 {Omega} standard resistor by quantum Hall effect
Comparison of the NIST and ENEA air kerma standards
NIST comparison of resistances based on the calculable capacitor and the quantum Hall effect
Conference
·
Fri Dec 30 23:00:00 EST 1994
·
OSTI ID:125741
Comparison of the NIST and ENEA air kerma standards
Journal Article
·
Wed Jul 01 00:00:00 EDT 1998
· Journal of Research of the National Institute of Standards and Technology
·
OSTI ID:669842
NIST comparison of resistances based on the calculable capacitor and the quantum Hall effect
Conference
·
Fri Dec 30 23:00:00 EST 1994
·
OSTI ID:125832