Laminated metal matrix composites of ultra-high carbon steel-brass and Al-Al/SiC: Processing and properties
- Lawrence Livermore National Lab., CA (United States)
- Stanford Univ., CA (United States). Dept. of Materials Science and Engineering
- Kaiser Aluminum and Chemical Corp., Pleasanton, CA (United States). Center for Technology
We have fabricated laminated metal composites of (1) ultrahigh carbon steel (1.8%C) and brass (70Cu-30Zn), and (2) aluminum 5182 and aluminum 6061 with 25 vol.% SiCp. The laminates were prepared by hot pressing alternating layers of the component materials in an argon gas atmosphere. The steel was thermo-mechanically processed to produce a fine grained microstructure that exhibited superplasticity. The brass and aluminum materials were obtained from commercial sources and used in the as-received condition. Laminates with different numbers of layers and layer thickness were made. The compressive stress and strain rate were measured during hot pressing, and material flow behavior in the UHCS-brass laminate was found to be rate-controlled by the stronger component rather than by the softer one (brass). Material flow behavior was more complicated in the Al-laminate. Tensile and fracture behavior were determined by tensile tests and by chevron notched fracture toughness tests. Details of processing, microstructure and initial results of mechanical property tests of these laminates are discussed.
- Research Organization:
- Lawrence Livermore National Lab., CA (United States)
- Sponsoring Organization:
- USDOE; USDOE, Washington, DC (United States)
- DOE Contract Number:
- W-7405-ENG-48
- OSTI ID:
- 5929032
- Report Number(s):
- UCRL-107581-Rev.1; CONF-920305-5-Rev.1; ON: DE92007362
- Resource Relation:
- Conference: Minerals, Metals, and Materials Society (TMS) annual meeting and exhibition, San Diego, CA (United States), 1-5 Mar 1992
- Country of Publication:
- United States
- Language:
- English
Similar Records
Laminated metal composites of ultrahigh carbon steel/brass and Al/Al-SiC: Processing and properties
Processing and mechanical properties of laminated metal composites of Al/Al-25 vol. % SiC and ultrahigh carbon steel/brass
Related Subjects
COMPOSITE MATERIALS
FABRICATION
MECHANICAL PROPERTIES
ALUMINIUM BASE ALLOYS
BRASS
CARBON STEELS
FRACTURE PROPERTIES
GRAIN SIZE
MICROSTRUCTURE
SILICON CARBIDES
ALLOYS
ALUMINIUM ALLOYS
CARBIDES
CARBON COMPOUNDS
COPPER ALLOYS
COPPER BASE ALLOYS
CRYSTAL STRUCTURE
IRON ALLOYS
IRON BASE ALLOYS
MATERIALS
SILICON COMPOUNDS
SIZE
STEELS
ZINC ALLOYS
360601* - Other Materials- Preparation & Manufacture
360603 - Materials- Properties
360602 - Other Materials- Structure & Phase Studies