Processing and mechanical properties of laminated metal composites of Al/Al-25 vol. % SiC and ultrahigh carbon steel/brass
- Lawrence Livermore National Lab., CA (United States)
- Stanford Univ., CA (United States). Dept. of Materials Science and Engineering
Al 5182/Al 6061-25 vol.% SiCp and ultrahigh carbon (1.8% C) steel/brass (70% Cu-30% Zn type) laminates were prepared by press-bonding stacks of alternating layers of the component materials. Press bonding of these materials required consideration of the flow stresses of the component materials and the interlayer friction. Tensile properties and fracture toughness were measured for different processing conditions of surface oxide descaling, layer thickness, and heat treatment. Descaling of the surface oxide prior to the press-bonding was found to eliminate premature delamination along interfaces resulting in an increased yield strength and tensile ductility. Reduction in the layer thickness brought an increase in the tensile ductility for both laminates, a decrease in yield strength and fracture toughness for the Al laminate. T6 heat treatment on the Al laminate induced a substantial increase in the yield and tensile strength but a decrease in tensile ductility. Fracture surface morphology indicated evidences of local delamination, crack blunting and bridging. Fracture toughness measured in the crack arrester and crack divider orientation showed a substantial enhancement over that of the Al 6061-SiCp or UHCS components.
- Research Organization:
- Lawrence Livermore National Lab., CA (United States)
- Sponsoring Organization:
- DOE; USDOE, Washington, DC (United States)
- DOE Contract Number:
- W-7405-ENG-48
- OSTI ID:
- 6719331
- Report Number(s):
- UCRL-JC-111215; CONF-920890--1; ON: DE93007504
- Country of Publication:
- United States
- Language:
- English
Similar Records
Fracture toughness and tensile behavior of multi-layer laminated metal composite of Al 6090-25 vol % SiCp and Al 5182
Processing and mechanical properties of laminated metal composites of Al 6090-25 vol % SiC{sub p} and Al 5182
Related Subjects
360601* -- Other Materials-- Preparation & Manufacture
360603 -- Materials-- Properties
ALLOYS
ALUMINIUM ALLOYS
ALUMINIUM BASE ALLOYS
BONDING
BRASS
CARBIDES
CARBON COMPOUNDS
COMPOSITE MATERIALS
COPPER ALLOYS
COPPER BASE ALLOYS
DIMENSIONS
FABRICATION
FRACTURE PROPERTIES
HEAT TREATMENTS
IRON ALLOYS
IRON BASE ALLOYS
JOINING
LAMELLAE
LAYERS
MATERIALS
MATERIALS WORKING
MECHANICAL PROPERTIES
PRESSING
PROCESSING
SILICON CARBIDES
SILICON COMPOUNDS
STEELS
TENSILE PROPERTIES
THICKNESS
ZINC ALLOYS