Steel bars, forgings, and tubing, 0.95Cr 0.22V (0.48-0.53c) (reaffirmed, 1992). (SAE standard)
Technical Report
·
OSTI ID:591045
This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock. Primarily for parts 0.500 in. (12.50 mm) and under in nominal section thickness at time of heat treatment requiring a through-hardening steel capable of developing hardness as high as 52 HRC when properly hardened and tempered and also parts of greater thickness but requiring proportionately lower hardness. Alloy: 6150 UNS Number: G6150.
- Research Organization:
- Society of Automotive Engineers, Inc., Warrendale, PA (United States)
- OSTI ID:
- 591045
- Report Number(s):
- SAE-AMS--6448F/XAB
- Country of Publication:
- United States
- Language:
- English
Similar Records
Steel, bars, forgings, and tubing, 0.80Cr 1.8Ni 0.25Mo (0.38 0.43c). (SAE standard)
Steel bars, forgings, and rings 0.50Cr 0.55Ni 0.25Mo (0.38-0.43c) (reaffirmed, 1992). (SAE standard)
Steel bars, forgings and rings, 0.95Cr 0.20Mo (0.38-0.43C), annealed. (SAE standard)
Technical Report
·
Sat Jun 01 00:00:00 EDT 1996
·
OSTI ID:591043
Steel bars, forgings, and rings 0.50Cr 0.55Ni 0.25Mo (0.38-0.43c) (reaffirmed, 1992). (SAE standard)
Technical Report
·
Wed Dec 31 23:00:00 EST 1986
·
OSTI ID:591033
Steel bars, forgings and rings, 0.95Cr 0.20Mo (0.38-0.43C), annealed. (SAE standard)
Technical Report
·
Mon May 01 00:00:00 EDT 1995
·
OSTI ID:591038