Construction of a multipole wiggler, MPW/number sign/13, at the Photon Factory
An insertion device, MPW/number sign/13, which can be operated in both wiggler and undulator modes, is presently under construction at the Photon Factory (PF). When installed in the PF storage ring, this device will produce wiggler radiation in the hard x-ray region, and also undulator radiation in the vacuum-ultraviolet (VUV) and soft x-ray regions. The wiggler structure employs 27 magnetic poles with a period length of 18 cm. The maximum peak field of the device of 1.5 T is attained via the hybrid configuration of its magnetic poles. Calculations of the spectral brilliance of the device exhibits the following features: in the wiggler mode, the brilliance at 10 keV will exceed that of the PF bending magnet radiation by a factor of 30; and in the undulator mode it will be between 10 and 100 times higher, from 10 eV to 1 keV, utilizing up to the fifth harmonic.
- Research Organization:
- Photon Factory, National Laboratory for High Energy Physics, Oho, Tsukuba, Ibaraki 305, Japan (JP)
- OSTI ID:
- 5819370
- Journal Information:
- Rev. Sci. Instrum.; (United States), Journal Name: Rev. Sci. Instrum.; (United States) Vol. 60:7; ISSN RSINA
- Country of Publication:
- United States
- Language:
- English
Similar Records
Design and Construction of a New Multipole Wiggler (MPW no. 05) at the Photon Factory
New multipole wiggler/undulator beamline (BL-16) at the Photon Factory
Related Subjects
430400* -- Particle Accelerators-- Storage Rings
DESIGN
ELECTRICAL EQUIPMENT
ELECTROMAGNETS
ENERGY RANGE
ENERGY SPECTRA
EQUIPMENT
EV RANGE
EV RANGE 10-100
KEK PHOTON FACTORY
KEV RANGE
KEV RANGE 01-10
MAGNETS
OPTIMIZATION
RADIATION SOURCES
SPECIFICATIONS
SPECTRA
SYNCHROTRON RADIATION SOURCES
WIGGLER MAGNETS