skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Soft x-ray transmission gratings

Conference ·
OSTI ID:5197436

A technique was developed for producing transmission diffraction gratings suitable for use in the soft x-ray region. Thin self-supporting films of a transparent material are overlaid with several thousand opaque metallic strips per mm. Gratings with 2100, 2400, and 5600 1/mm have been produced and tested. Representative spectra over the wavelength range from 17.2 to 40.0 nm are given for a grating consisting of a 120-nm-thick Al support layer overlaid with 2400, 34-nm-thick, Ag strips/mm. The absolute transmittance is approx. 13% at 30 nm, and the efficiency in the first order is approx. 16%. The observed resolution of approx. 2A is acceptable for many of the potential applications. These gratings have several advantages over the two presently available alternatives in the soft x-ray region (i.e., reflection gratings used at grazing incidence and free-standing metallic wire transmission gratings). Fabrication is relatively quick, simple, and cheap. The support layer can also serve as a filter and help conduct excessive heat away. Higher line densities and hence higher resolutions are possible, and when used at normal incidence the spectra are aberration free. Suitable materials, component thicknesses, and line densities can be chosen to produce a grating of optimum characteristics for a particular application.

Research Organization:
Oak Ridge National Lab., TN (USA)
Sponsoring Organization:
USDOE Office of Health and Environmental Research
DOE Contract Number:
W-7405-ENG-26
OSTI ID:
5197436
Report Number(s):
CONF-800719-11; TRN: 80-015526
Resource Relation:
Conference: International symposium of the Society of Photo-Optical Instrumentation Engineers, San Diego, CA, USA, 28 Jul 1980
Country of Publication:
United States
Language:
English